access-controllers is an optional property that allows a peripheral to
refer to one or more domain access controller(s).

This property is added when the peripheral is under the STM32 firewall
controller.  It allows an accurate representation of the hardware, where
the peripheral is connected to a firewall bus.  The firewall can then check
the peripheral accesses before allowing its device to probe.

Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
---
 Documentation/devicetree/bindings/display/st,stm32-ltdc.yaml | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/Documentation/devicetree/bindings/display/st,stm32-ltdc.yaml b/Documentation/devicetree/bindings/display/st,stm32-ltdc.yaml
index 546f57cb7a402b82e868aa05f874c65b8da19444..962938978d4854c68d608dad0b190ef3f6a7ba63 100644
--- a/Documentation/devicetree/bindings/display/st,stm32-ltdc.yaml
+++ b/Documentation/devicetree/bindings/display/st,stm32-ltdc.yaml
@@ -36,6 +36,9 @@ properties:
   resets:
     maxItems: 1
 
+  access-controllers:
+    maxItems: 1
+
   port:
     $ref: /schemas/graph.yaml#/properties/port
     description: |

-- 
2.25.1

On Fri, 25 Jul 2025 12:03:54 +0200, Raphael Gallais-Pou wrote:
> access-controllers is an optional property that allows a peripheral to
> refer to one or more domain access controller(s).
> 
> This property is added when the peripheral is under the STM32 firewall
> controller.  It allows an accurate representation of the hardware, where
> the peripheral is connected to a firewall bus.  The firewall can then check
> the peripheral accesses before allowing its device to probe.
> 
> Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
> ---
>  Documentation/devicetree/bindings/display/st,stm32-ltdc.yaml | 3 +++
>  1 file changed, 3 insertions(+)
> 

Acked-by: Rob Herring (Arm) <robh@kernel.org>

On Fri, 25 Jul 2025 12:03:54 +0200, Raphael Gallais-Pou wrote:
> access-controllers is an optional property that allows a peripheral to
> refer to one or more domain access controller(s).
> 
> This property is added when the peripheral is under the STM32 firewall
> controller.  It allows an accurate representation of the hardware, where
> the peripheral is connected to a firewall bus.  The firewall can then check
> the peripheral accesses before allowing its device to probe.
> 
> Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
> ---
>  Documentation/devicetree/bindings/display/st,stm32-ltdc.yaml | 3 +++
>  1 file changed, 3 insertions(+)
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:
./Documentation/devicetree/bindings/display/st,stm32-ltdc.yaml:81:7: [warning] wrong indentation: expected 8 but found 6 (indentation)

dtschema/dtc warnings/errors:

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20250725-drm-misc-next-v1-2-a59848e62cf9@foss.st.com

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.