From: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>

Add the GPU_CC and GX_CC (brand new! as far as we're concerned, this
is simply a separate block housing the GX GDSC) nodes, required to
power up the graphics-related hardware.

Make use of it by enabling the associated IOMMU as well. The GPU itself
needs some more work and will be enabled later.

Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
---
 arch/arm64/boot/dts/qcom/sm8750.dtsi | 63 ++++++++++++++++++++++++++++++++++++
 1 file changed, 63 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sm8750.dtsi b/arch/arm64/boot/dts/qcom/sm8750.dtsi
index 4643705021c6ca095a16d8d7cc3adac920b21e82..ca0770a34bed64183185aedde04f1bb96eebfa91 100644
--- a/arch/arm64/boot/dts/qcom/sm8750.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8750.dtsi
@@ -5,6 +5,7 @@
 
 #include <dt-bindings/clock/qcom,rpmh.h>
 #include <dt-bindings/clock/qcom,sm8750-gcc.h>
+#include <dt-bindings/clock/qcom,sm8750-gpucc.h>
 #include <dt-bindings/clock/qcom,sm8750-tcsr.h>
 #include <dt-bindings/dma/qcom-gpi.h>
 #include <dt-bindings/gpio/gpio.h>
@@ -3154,6 +3155,68 @@ tcsrcc: clock-controller@f204008 {
 			#reset-cells = <1>;
 		};
 
+		gxcc: clock-controller@3d64000 {
+			compatible = "qcom,sm8750-gxcc";
+			reg = <0x0 0x03d64000 0x0 0x6000>;
+			power-domains = <&rpmhpd RPMHPD_GFX>,
+					<&rpmhpd RPMHPD_MXC>,
+					<&gpucc GPU_CC_CX_GDSC>;
+			#power-domain-cells = <1>;
+		};
+
+		gpucc: clock-controller@3d90000 {
+			compatible = "qcom,sm8750-gpucc";
+			reg = <0x0 0x03d90000 0x0 0x9800>;
+
+			clocks = <&bi_tcxo_div2>,
+				 <&gcc GCC_GPU_GPLL0_CLK_SRC>,
+				 <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>;
+
+			power-domains = <&rpmhpd RPMHPD_CX>;
+
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		adreno_smmu: iommu@3da0000 {
+			compatible = "qcom,sm8750-smmu-500", "qcom,adreno-smmu",
+				     "qcom,smmu-500", "arm,mmu-500";
+			reg = <0x0 0x03da0000 0x0 0x40000>;
+			#iommu-cells = <2>;
+			#global-interrupts = <1>;
+			interrupts = <GIC_SPI 674 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 678 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 679 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 680 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 681 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 682 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 683 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 684 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 685 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 686 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 687 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 688 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 476 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 574 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 575 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 576 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 577 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 660 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 662 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 665 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 666 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 667 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 669 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 670 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 700 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gpucc GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK>;
+			clock-names = "hlos";
+			power-domains = <&gpucc GPU_CC_CX_GDSC>;
+			dma-coherent;
+		};
+
 		apps_smmu: iommu@15000000 {
 			compatible = "qcom,sm8750-smmu-500", "qcom,smmu-500", "arm,mmu-500";
 			reg = <0x0 0x15000000 0x0 0x100000>;

-- 
2.50.1

On Wed, Jul 23, 2025 at 10:38:50PM +0200, Konrad Dybcio wrote:
> From: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
> 
> Add the GPU_CC and GX_CC (brand new! as far as we're concerned, this
> is simply a separate block housing the GX GDSC) nodes, required to
> power up the graphics-related hardware.
> 
> Make use of it by enabling the associated IOMMU as well. The GPU itself
> needs some more work and will be enabled later.
> 
> Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
> ---
>  arch/arm64/boot/dts/qcom/sm8750.dtsi | 63 ++++++++++++++++++++++++++++++++++++
>  1 file changed, 63 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sm8750.dtsi b/arch/arm64/boot/dts/qcom/sm8750.dtsi
> index 4643705021c6ca095a16d8d7cc3adac920b21e82..ca0770a34bed64183185aedde04f1bb96eebfa91 100644
> --- a/arch/arm64/boot/dts/qcom/sm8750.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm8750.dtsi
> @@ -5,6 +5,7 @@
>  
>  #include <dt-bindings/clock/qcom,rpmh.h>
>  #include <dt-bindings/clock/qcom,sm8750-gcc.h>
> +#include <dt-bindings/clock/qcom,sm8750-gpucc.h>
>  #include <dt-bindings/clock/qcom,sm8750-tcsr.h>
>  #include <dt-bindings/dma/qcom-gpi.h>
>  #include <dt-bindings/gpio/gpio.h>
> @@ -3154,6 +3155,68 @@ tcsrcc: clock-controller@f204008 {
>  			#reset-cells = <1>;
>  		};
>  
> +		gxcc: clock-controller@3d64000 {

Not a clock controller based on properties below.

> +			compatible = "qcom,sm8750-gxcc";
> +			reg = <0x0 0x03d64000 0x0 0x6000>;
> +			power-domains = <&rpmhpd RPMHPD_GFX>,
> +					<&rpmhpd RPMHPD_MXC>,
> +					<&gpucc GPU_CC_CX_GDSC>;
> +			#power-domain-cells = <1>;
> +		};

Best regards,
Krzysztof