Add a v4l2 subdevice driver for the Omnivision OV2735 sensor.

The Omnivision OV2735 is a 1/2.7-Inch CMOS image sensor with an
active array size of 1920 x 1080.

The following features are supported:
- Manual exposure an gain control support.
- vblank/hblank control support.
- Test pattern support control.
- Supported resolution: 1920 x 1080 @ 30fps (SGRBG10).

The driver is tested on mainline branch v6.14-rc6 on IMX8MP Debix Model a.

v2 -> v3

In Patch 1/2:
- Renamed pwdn pin to enable pin.
- Changed supply names to lowercase and added them to required properties.

In Patch 2/2:
- Stored page number in CCI private bits.
- Added helper functions to handle page switching in cci_read() and cci_write().
- Removed ov2735_mbus_codes.
- Corrected control count to 9.

v1 -> v2

- Added necessary header files.
- Corrected indentation.
- Used the ret parameter in cci_write and cci_read functions.

Hardevsinh Palaniya (1):
  media: i2c: add ov2735 image sensor driver

Himanshu Bhavani (1):
  dt-bindings: media: i2c: Add ov2735 sensor

 .../bindings/media/i2c/ovti,ov2735.yaml       | 115 +++
 MAINTAINERS                                   |   9 +
 drivers/media/i2c/Kconfig                     |  10 +
 drivers/media/i2c/Makefile                    |   1 +
 drivers/media/i2c/ov2735.c                    | 962 ++++++++++++++++++
 5 files changed, 1097 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/media/i2c/ovti,ov2735.yaml
 create mode 100644 drivers/media/i2c/ov2735.c

-- 
2.34.1