Use max() to reduce the code and improve its readability.
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
---
drivers/net/wireless/ath/ath5k/phy.c | 12 +++---------
1 file changed, 3 insertions(+), 9 deletions(-)
diff --git a/drivers/net/wireless/ath/ath5k/phy.c b/drivers/net/wireless/ath/ath5k/phy.c
index 4825f9cb9cb8..b76772396590 100644
--- a/drivers/net/wireless/ath/ath5k/phy.c
+++ b/drivers/net/wireless/ath/ath5k/phy.c
@@ -3116,10 +3116,7 @@ ath5k_combine_pwr_to_pdadc_curves(struct ath5k_hw *ah,
pd_gain_overlap;
/* Force each power step to be at least 0.5 dB */
- if ((pdadc_tmp[1] - pdadc_tmp[0]) > 1)
- pwr_step = pdadc_tmp[1] - pdadc_tmp[0];
- else
- pwr_step = 1;
+ pwr_step = max(pdadc_tmp[1] - pdadc_tmp[0], 1);
/* If pdadc_0 is negative, we need to extrapolate
* below this pdgain by a number of pwr_steps */
@@ -3144,11 +3141,8 @@ ath5k_combine_pwr_to_pdadc_curves(struct ath5k_hw *ah,
continue;
/* Force each power step to be at least 0.5 dB */
- if ((pdadc_tmp[table_size - 1] - pdadc_tmp[table_size - 2]) > 1)
- pwr_step = pdadc_tmp[table_size - 1] -
- pdadc_tmp[table_size - 2];
- else
- pwr_step = 1;
+ pwr_step = max(pdadc_tmp[table_size - 1] -
+ pdadc_tmp[table_size - 2], 1);
/* Extrapolate above */
while ((pdadc_0 < (s16) pdadc_n) &&
--
2.34.1