changes v2:
- drop IRQ patch.
- no other changes are made

Hi all,

The SMSC 10/100 PHYs (LAN87xx family) found in smsc95xx (lan95xx)
USB-Ethernet adapters show several quirks around the Auto-MDIX feature:

- A hardware strap (AUTOMDIX_EN) may boot the PHY in fixed-MDI mode, and
  the current driver cannot always override it.

- When Auto-MDIX is left enabled while autonegotiation is forced off,
  the PHY endlessly swaps the TX/RX pairs and never links up.

- The driver sets the enable bit for Auto-MDIX but forgets the override
  bit, so userspace requests are silently ignored.

- Rapid configuration changes can wedge the link if PHY IRQs are
  enabled.

The four patches below make the MDIX state fully predictable and prevent
link failures in every tested strap / autoneg / MDI-X permutation.

Tested on LAN9512 Eval board.

Best Regards,
Oleksij

Oleksij Rempel (3):
  net: phy: smsc: Fix Auto-MDIX configuration when disabled by strap
  net: phy: smsc: Force predictable MDI-X state on LAN87xx
  net: phy: smsc: Fix link failure in forced mode with Auto-MDIX

 drivers/net/phy/smsc.c | 57 ++++++++++++++++++++++++++++++++++++++----
 1 file changed, 52 insertions(+), 5 deletions(-)

--
2.39.5