The following 4-patch series adds upstream support for the Sony
IMX585 CMOS image-sensor.
Features
==========
* 4-lane or 2-lane MIPI-CSI-2 up to 2079 Mbps/lane
* 4 K @ 60 fps 12-bit linear, 4 K @ 30 fps 16-bit Clear-HDR,
4 K @ 30 fps 12-bit gradient compression Clear-HDR
1080p binning mode, mono hardware variant, HCG support.
* New Sensor Dependent V4L2 controls for
HDR blending, grad-compression, HCG enable and Enable ClearHDR.
* Additional IRCut filter support through V4L2_CID_BAND_STOP_FILTER.
* Blacklevel adjustments through V4L2_CID_BRIGHTNESS.
* Multi Camera synchronization mode support.
The driver has been validated on Raspberry Pi 4 B and Pi 5 using libcamera
with a 24 MHz master clock.
Series layout
=============
1. **dt-bindings: media: Add Sony IMX585 CMOS image sensor**
2. **media: uapi: Add custom IMX585 control IDs**
3. **media: i2c: imx585: Add Sony IMX585 image-sensor driver**
4. **media: docs: Add userspace-API guide for the IMX585 driver**
Feedback is welcome, in particular on the private-control API.
Thanks in advance for your review!
v1:
- initial posting
Regards,
Will
Will Whang (4):
dt-bindings: media: Add Sony IMX585 CMOS image sensor
media: uapi: Add custom IMX585 control IDs
media: i2c: imx585: Add Sony IMX585 image-sensor driver
media: docs: Add userspace-API guide for the IMX585 driver
.../bindings/media/i2c/sony,imx585.yaml | 120 +
.../userspace-api/media/drivers/imx585.rst | 95 +
MAINTAINERS | 8 +
drivers/media/i2c/Kconfig | 9 +
drivers/media/i2c/Makefile | 1 +
drivers/media/i2c/imx585.c | 2466 +++++++++++++++++
include/uapi/linux/imx585.h | 20 +
include/uapi/linux/v4l2-controls.h | 6 +
8 files changed, 2725 insertions(+)
create mode 100644 Documentation/devicetree/bindings/media/i2c/sony,imx585.yaml
create mode 100644 Documentation/userspace-api/media/drivers/imx585.rst
create mode 100644 drivers/media/i2c/imx585.c
create mode 100644 include/uapi/linux/imx585.h
--
2.39.5