On Tue Jul 1, 2025 at 10:01 AM BST, Bartosz Golaszewski wrote:
> From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
>
> The I2C GPIO bus driver enforces the SDA and SCL pins as open-drain
> outputs but the lookup flags in the DTS don't reflect that triggering
> warnings from GPIO core. Add the appropriate flags.
>
> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reported-by: Alexey Klimov <alexey.klimov@linaro.org>
> ---
> arch/arm64/boot/dts/qcom/qrb4210-rb2.dts | 5 +++--
> 1 file changed, 3 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts b/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts
> index a37860175d2733214f1b257e84d5cb4821033242..bdf2d66e40c62596b8b024de833835a0750df35d 100644
> --- a/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts
> +++ b/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts
> @@ -5,6 +5,7 @@
>
> /dts-v1/;
>
> +#include <dt-bindings/gpio/gpio.h>
> #include <dt-bindings/leds/common.h>
> #include <dt-bindings/sound/qcom,q6afe.h>
> #include <dt-bindings/sound/qcom,q6asm.h>
> @@ -65,8 +66,8 @@ hdmi_con: endpoint {
> i2c2_gpio: i2c {
> compatible = "i2c-gpio";
>
> - sda-gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>;
> - scl-gpios = <&tlmm 7 GPIO_ACTIVE_HIGH>;
> + sda-gpios = <&tlmm 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
> + scl-gpios = <&tlmm 7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
> #address-cells = <1>;
> #size-cells = <0>;
>