Add the missing required-opps and operating-points-v2 properties to
several I2C, SPI, and UART nodes in the QUP SEs.

Fixes: f6746dc9e379 ("arm64: dts: qcom: qcs615: Add QUPv3 configuration")
Cc: stable@vger.kernel.org
Signed-off-by: Viken Dadhaniya <viken.dadhaniya@oss.qualcomm.com>
---

v1 -> v2:

- Added Fixes and Cc tag.

v1 Link: https://lore.kernel.org/all/20250626102826.3422984-1-viken.dadhaniya@oss.qualcomm.com/
---
---
 arch/arm64/boot/dts/qcom/qcs615.dtsi | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/qcs615.dtsi b/arch/arm64/boot/dts/qcom/qcs615.dtsi
index bfbb21035492..e033b53f0f0f 100644
--- a/arch/arm64/boot/dts/qcom/qcs615.dtsi
+++ b/arch/arm64/boot/dts/qcom/qcs615.dtsi
@@ -631,6 +631,7 @@ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
 				interconnect-names = "qup-core",
 						     "qup-config";
 				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table>;
 				status = "disabled";
 			};
 
@@ -654,6 +655,7 @@ &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
 						     "qup-config",
 						     "qup-memory";
 				power-domains = <&rpmhpd RPMHPD_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
 				dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>,
 				       <&gpi_dma0 1 1 QCOM_GPI_I2C>;
 				dma-names = "tx",
@@ -681,6 +683,7 @@ &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
 						     "qup-config",
 						     "qup-memory";
 				power-domains = <&rpmhpd RPMHPD_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
 				dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>,
 				       <&gpi_dma0 1 2 QCOM_GPI_I2C>;
 				dma-names = "tx",
@@ -703,6 +706,7 @@ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
 				interconnect-names = "qup-core",
 						     "qup-config";
 				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table>;
 				dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>,
 				       <&gpi_dma0 1 2 QCOM_GPI_SPI>;
 				dma-names = "tx",
@@ -728,6 +732,7 @@ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
 				interconnect-names = "qup-core",
 						     "qup-config";
 				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table>;
 				status = "disabled";
 			};
 
@@ -751,6 +756,7 @@ &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
 						     "qup-config",
 						     "qup-memory";
 				power-domains = <&rpmhpd RPMHPD_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
 				dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>,
 				       <&gpi_dma0 1 3 QCOM_GPI_I2C>;
 				dma-names = "tx",
-- 
2.34.1

On Mon, 30 Jun 2025 12:13:38 +0530, Viken Dadhaniya wrote:
> Add the missing required-opps and operating-points-v2 properties to
> several I2C, SPI, and UART nodes in the QUP SEs.
> 
> 

Applied, thanks!

[1/1] arm64: dts: qcom: qcs615: add missing dt property in QUP SEs
      commit: d8356c7975f75c1db52e9ac908cf2597272ce2aa

Best regards,
-- 
Bjorn Andersson <andersson@kernel.org>

On Mon, Jun 30, 2025 at 12:13:38PM +0530, Viken Dadhaniya wrote:
> Add the missing required-opps and operating-points-v2 properties to
> several I2C, SPI, and UART nodes in the QUP SEs.
> 
> Fixes: f6746dc9e379 ("arm64: dts: qcom: qcs615: Add QUPv3 configuration")
> Cc: stable@vger.kernel.org
> Signed-off-by: Viken Dadhaniya <viken.dadhaniya@oss.qualcomm.com>
> ---
> 
> v1 -> v2:
> 
> - Added Fixes and Cc tag.
> 
> v1 Link: https://lore.kernel.org/all/20250626102826.3422984-1-viken.dadhaniya@oss.qualcomm.com/
> ---
> ---
>  arch/arm64/boot/dts/qcom/qcs615.dtsi | 6 ++++++
>  1 file changed, 6 insertions(+)
> 

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>


-- 
With best wishes
Dmitry