Hello Clément,
On Fri, Jun 27, 2025 at 12:12:56PM +0200, Clément Le Goffic wrote:
> If the DMA mapping failed, it produced an error log with the wrong
> device name:
> "stm32-dma3 40400000.dma-controller: rejecting DMA map of vmalloc memory"
> Fix this issue by replacing the dev with the I2C dev.
>
> Fixes: bb8822cbbc53 ("i2c: i2c-stm32: Add generic DMA API")
> Signed-off-by: Clément Le Goffic <clement.legoffic@foss.st.com>
> ---
> drivers/i2c/busses/i2c-stm32.c | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/i2c/busses/i2c-stm32.c b/drivers/i2c/busses/i2c-stm32.c
> index 157c64e27d0b..272a5dffb08f 100644
> --- a/drivers/i2c/busses/i2c-stm32.c
> +++ b/drivers/i2c/busses/i2c-stm32.c
> @@ -118,7 +118,7 @@ int stm32_i2c_prep_dma_xfer(struct device *dev, struct stm32_i2c_dma *dma,
> dma->dma_len = len;
> chan_dev = dma->chan_using->device->dev;
>
> - dma->dma_buf = dma_map_single(chan_dev, buf, dma->dma_len,
> + dma->dma_buf = dma_map_single(dev, buf, dma->dma_len,
> dma->dma_data_dir);
> if (dma_mapping_error(chan_dev, dma->dma_buf)) {
> dev_err(dev, "DMA mapping failed\n");
> @@ -150,7 +150,7 @@ int stm32_i2c_prep_dma_xfer(struct device *dev, struct stm32_i2c_dma *dma,
> return 0;
>
> err:
> - dma_unmap_single(chan_dev, dma->dma_buf, dma->dma_len,
> + dma_unmap_single(dev, dma->dma_buf, dma->dma_len,
> dma->dma_data_dir);
> return ret;
> }
>
Thanks for the v2.
Acked-by: Alain Volmat <alain.volmat@foss.st.com>
Regards,
Alain
> --
> 2.43.0
>