On Pixel 6 (and Pro), a Samsung S2MPG10 is used as main PMIC, which
contains the following functional blocks:
* common / speedy interface
* regulators
* 3 clock outputs
* RTC
* power meters
* GPIO interfaces
This change enables the PMIC itself and the RTC. We're still working on
the remaining parts or waiting for bindings to be merged, hence only a
small subset of the functional is being enabled.
The regulators fall into the same category (still being finalised), but
since the binding requires a 'regulators' node, an empty node is being
added to avoid validation errors at this stage.
Signed-off-by: André Draszik <andre.draszik@linaro.org>
---
.../boot/dts/exynos/google/gs101-pixel-common.dtsi | 19 +++++++++++++++++++
1 file changed, 19 insertions(+)
diff --git a/arch/arm64/boot/dts/exynos/google/gs101-pixel-common.dtsi b/arch/arm64/boot/dts/exynos/google/gs101-pixel-common.dtsi
index cd8e1b8a10b111190b984e104f749d04514d0449..c1b51f4cfb8c174852b44690f84ed1aa0b4057c2 100644
--- a/arch/arm64/boot/dts/exynos/google/gs101-pixel-common.dtsi
+++ b/arch/arm64/boot/dts/exynos/google/gs101-pixel-common.dtsi
@@ -100,6 +100,19 @@ cont_splash_mem: splash@fac00000 {
};
};
+&acpm_ipc {
+ pmic {
+ compatible = "samsung,s2mpg10-pmic";
+ interrupts-extended = <&gpa0 6 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmic_int>;
+ wakeup-source;
+
+ regulators {
+ };
+ };
+};
+
&ext_24_5m {
clock-frequency = <24576000>;
};
@@ -290,6 +303,12 @@ if_pmic_int: if-pmic-int-pins {
};
&pinctrl_gpio_alive {
+ pmic_int: pmic-int-pins {
+ samsung,pins = "gpa0-6";
+ samsung,pin-function = <GS101_PIN_FUNC_EINT>;
+ samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+ };
+
key_power: key-power-pins {
samsung,pins = "gpa10-1";
samsung,pin-function = <GS101_PIN_FUNC_EINT>;
--
2.50.0.727.gbf7dc18ff4-goog