The i.MX 8DualXLite/8SoloXLite has a different connectivity memory map
than the generic i.MX8 has.  One conflicting resource is usb, where the
imx8dxl has a second usb2 phy @5b110000, while the generic imx8 dtsi has
one usb2 phy and one usb3 phy, and the usb3otg @5b110000.  When
including both imx8dxl-ss-conn.dtsi and imx8-ss-conn.dtsi as done in
imx8dxl.dtsi this leads to a duplicate unit-address warning.

The usb3otg node was introduced after the initial imx8dxl support with
commit a8bd7f155126 ("arm64: dts: imx8qxp: add cadence usb3 support")
and since then leads to warnings like this (when built with W=2):

      DTC     arch/arm64/boot/dts/freescale/imx8dxl-evk.dtb
    …/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi:148.24-182.4: Warning (unique_unit_address): /bus@5b000000/usb@5b110000: duplicate unit-address (also used in node /bus@5b000000/usbphy@5b110000)
    …/arch/arm64/boot/dts/freescale/imx8-ss-hsio.dtsi:52.23-81.4: Warning (unique_unit_address): /bus@5f000000/pcie@5f010000: duplicate unit-address (also used in node /bus@5f000000/pcie-ep@5f010000)
      also defined at …/arch/arm64/boot/dts/freescale/imx8dxl-ss-hsio.dtsi:41.23-50.4
      also defined at …/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts:645.8-653.3

After the change that usb related warning is gone:

      DTC     arch/arm64/boot/dts/freescale/imx8dxl-evk.dtb
    …/arch/arm64/boot/dts/freescale/imx8-ss-hsio.dtsi:52.23-81.4: Warning (unique_unit_address): /bus@5f000000/pcie@5f010000: duplicate unit-address (also used in node /bus@5f000000/pcie-ep@5f010000)
      also defined at …/arch/arm64/boot/dts/freescale/imx8dxl-ss-hsio.dtsi:41.23-50.4
      also defined at …/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts:645.8-653.3

Signed-off-by: Alexander Dahl <ada@thorsis.com>
---

Notes:
    v2:
    - reworded commit message (build on mainline with W=2)
    - rebased on v6.16-rc3
    
    v1:
    - Link: https://lore.kernel.org/linux-devicetree/20250610060756.8212-1-ada@thorsis.com/

 arch/arm64/boot/dts/freescale/imx8dxl-ss-conn.dtsi | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8dxl-ss-conn.dtsi b/arch/arm64/boot/dts/freescale/imx8dxl-ss-conn.dtsi
index 9b114bed084b..a66ba6d0a8c0 100644
--- a/arch/arm64/boot/dts/freescale/imx8dxl-ss-conn.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8dxl-ss-conn.dtsi
@@ -5,6 +5,8 @@
 
 /delete-node/ &enet1_lpcg;
 /delete-node/ &fec2;
+/delete-node/ &usbotg3;
+/delete-node/ &usb3_phy;
 
 / {
 	conn_enet0_root_clk: clock-conn-enet0-root {

base-commit: 86731a2a651e58953fc949573895f2fa6d456841
-- 
2.39.5

On Mon, Jun 23, 2025 at 09:54:40AM +0200, Alexander Dahl wrote:
> The i.MX 8DualXLite/8SoloXLite has a different connectivity memory map
> than the generic i.MX8 has.  One conflicting resource is usb, where the
> imx8dxl has a second usb2 phy @5b110000, while the generic imx8 dtsi has
> one usb2 phy and one usb3 phy, and the usb3otg @5b110000.  When
> including both imx8dxl-ss-conn.dtsi and imx8-ss-conn.dtsi as done in
> imx8dxl.dtsi this leads to a duplicate unit-address warning.
>
> The usb3otg node was introduced after the initial imx8dxl support with
> commit a8bd7f155126 ("arm64: dts: imx8qxp: add cadence usb3 support")
> and since then leads to warnings like this (when built with W=2):
>
>       DTC     arch/arm64/boot/dts/freescale/imx8dxl-evk.dtb
>     …/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi:148.24-182.4: Warning (unique_unit_address): /bus@5b000000/usb@5b110000: duplicate unit-address (also used in node /bus@5b000000/usbphy@5b110000)
>     …/arch/arm64/boot/dts/freescale/imx8-ss-hsio.dtsi:52.23-81.4: Warning (unique_unit_address): /bus@5f000000/pcie@5f010000: duplicate unit-address (also used in node /bus@5f000000/pcie-ep@5f010000)

Remove pcie part, which is not related this patch.

>       also defined at …/arch/arm64/boot/dts/freescale/imx8dxl-ss-hsio.dtsi:41.23-50.4
>       also defined at …/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts:645.8-653.3
>
> After the change that usb related warning is gone:
>
>       DTC     arch/arm64/boot/dts/freescale/imx8dxl-evk.dtb
>     …/arch/arm64/boot/dts/freescale/imx8-ss-hsio.dtsi:52.23-81.4: Warning (unique_unit_address): /bus@5f000000/pcie@5f010000: duplicate unit-address (also used in node /bus@5f000000/pcie-ep@5f010000)
>       also defined at …/arch/arm64/boot/dts/freescale/imx8dxl-ss-hsio.dtsi:41.23-50.4
>       also defined at …/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts:645.8-653.3

Needn't show this log again. Just said

Delete usb3.0 related nodes at dxl to fix above warning.

Frank


>
> Signed-off-by: Alexander Dahl <ada@thorsis.com>
> ---
>
> Notes:
>     v2:
>     - reworded commit message (build on mainline with W=2)
>     - rebased on v6.16-rc3
>
>     v1:
>     - Link: https://lore.kernel.org/linux-devicetree/20250610060756.8212-1-ada@thorsis.com/
>
>  arch/arm64/boot/dts/freescale/imx8dxl-ss-conn.dtsi | 2 ++
>  1 file changed, 2 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/freescale/imx8dxl-ss-conn.dtsi b/arch/arm64/boot/dts/freescale/imx8dxl-ss-conn.dtsi
> index 9b114bed084b..a66ba6d0a8c0 100644
> --- a/arch/arm64/boot/dts/freescale/imx8dxl-ss-conn.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8dxl-ss-conn.dtsi
> @@ -5,6 +5,8 @@
>
>  /delete-node/ &enet1_lpcg;
>  /delete-node/ &fec2;
> +/delete-node/ &usbotg3;
> +/delete-node/ &usb3_phy;
>
>  / {
>  	conn_enet0_root_clk: clock-conn-enet0-root {
>
> base-commit: 86731a2a651e58953fc949573895f2fa6d456841
> --
> 2.39.5
>