Add csiphy current value to support csiphy current load setting.

Signed-off-by: Wenmeng Liu <quic_wenmliu@quicinc.com>
---
 arch/arm64/boot/dts/qcom/qcs6490-rb3gen2-vision-mezzanine.dtso | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2-vision-mezzanine.dtso b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2-vision-mezzanine.dtso
index b9e4a5214f70..60e7d46db394 100644
--- a/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2-vision-mezzanine.dtso
+++ b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2-vision-mezzanine.dtso
@@ -16,6 +16,7 @@
 &camss {
 	vdda-phy-supply = <&vreg_l10c_0p88>;
 	vdda-pll-supply = <&vreg_l6b_1p2>;
+	regulator-load-current = <54000 96400>;
 
 	status = "okay";
 
-- 
2.34.1

On 20/06/2025 06:07, Wenmeng Liu wrote:
> Add csiphy current value to support csiphy current load setting.

Why? Why doing this? Why is this needed?

Best regards,
Krzysztof