Add gpio line name to support multiplexed console

Signed-off-by: Marshall Zhan <marshall_zhan@wiwynn.com>
---
 .../aspeed/aspeed-bmc-facebook-yosemite4.dts  | 40 +++++++++++++++++++
 1 file changed, 40 insertions(+)

diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
index 29f224bccd63..aae789854c52 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
@@ -189,6 +189,11 @@ gpio@22 {
 		reg = <0x22>;
 		gpio-controller;
 		#gpio-cells = <2>;
+		gpio-line-names = "SLOT1_UART_SEL0","SLOT1_UART_SEL1",
+				"SLOT1_UART_SEL2","","","","","",
+				"","","","","","","","",
+				"","","","","","","","",
+				"","","","","","","","";
 	};
 
 	gpio@23 {
@@ -235,6 +240,11 @@ gpio@22 {
 		reg = <0x22>;
 		gpio-controller;
 		#gpio-cells = <2>;
+		gpio-line-names = "SLOT2_UART_SEL0","SLOT2_UART_SEL1",
+				"SLOT2_UART_SEL2","","","","","",
+				"","","","","","","","",
+				"","","","","","","","",
+				"","","","","","","","";
 	};
 
 	gpio@23 {
@@ -281,6 +291,11 @@ gpio@22 {
 		reg = <0x22>;
 		gpio-controller;
 		#gpio-cells = <2>;
+		gpio-line-names = "SLOT3_UART_SEL0","SLOT3_UART_SEL1",
+				"SLOT3_UART_SEL2","","","","","",
+				"","","","","","","","",
+				"","","","","","","","",
+				"","","","","","","","";
 	};
 
 	gpio@23 {
@@ -327,6 +342,11 @@ gpio@22 {
 		reg = <0x22>;
 		gpio-controller;
 		#gpio-cells = <2>;
+		gpio-line-names = "SLOT4_UART_SEL0","SLOT4_UART_SEL1",
+				"SLOT4_UART_SEL2","","","","","",
+				"","","","","","","","",
+				"","","","","","","","",
+				"","","","","","","","";
 	};
 
 	gpio@23 {
@@ -373,6 +393,11 @@ gpio@22 {
 		reg = <0x22>;
 		gpio-controller;
 		#gpio-cells = <2>;
+		gpio-line-names = "SLOT5_UART_SEL0","SLOT5_UART_SEL1",
+				"SLOT5_UART_SEL2","","","","","",
+				"","","","","","","","",
+				"","","","","","","","",
+				"","","","","","","","";
 	};
 
 	gpio@23 {
@@ -419,6 +444,11 @@ gpio@22 {
 		reg = <0x22>;
 		gpio-controller;
 		#gpio-cells = <2>;
+		gpio-line-names = "SLOT6_UART_SEL0","SLOT6_UART_SEL1",
+				"SLOT6_UART_SEL2","","","","","",
+				"","","","","","","","",
+				"","","","","","","","",
+				"","","","","","","","";
 	};
 
 	gpio@23 {
@@ -465,6 +495,11 @@ gpio@22 {
 		reg = <0x22>;
 		gpio-controller;
 		#gpio-cells = <2>;
+		gpio-line-names = "SLOT7_UART_SEL0","SLOT7_UART_SEL1",
+				"SLOT7_UART_SEL2","","","","","",
+				"","","","","","","","",
+				"","","","","","","","",
+				"","","","","","","","";
 	};
 
 	gpio@23 {
@@ -511,6 +546,11 @@ gpio@22 {
 		reg = <0x22>;
 		gpio-controller;
 		#gpio-cells = <2>;
+		gpio-line-names = "SLOT8_UART_SEL0","SLOT8_UART_SEL1",
+				"SLOT8_UART_SEL2","","","","","",
+				"","","","","","","","",
+				"","","","","","","","",
+				"","","","","","","","";
 	};
 
 	gpio@23 {
-- 
2.25.1

Hi Marshall,

On Wed, 2025-06-18 at 15:08 +0800, MarshallZhan-wiwynn wrote:
> Add gpio line name to support multiplexed console
> 
> Signed-off-by: Marshall Zhan <marshall_zhan@wiwynn.com>

Thanks for fixing the email situation. However, I notice your git
username is set to `MashallZhan-wiwynn`, which is different how you've
filled out the Signed-off-by tag. I'd prefer you make them consistent.
You can do this with:

   git config --global user.name "Marshall Zhan"
   
Some people choose to include their employer like you have. Typically
this is done like:

   git config --global user.name "Marshall Zhan (Wiwynn)"
   
The patch is fine otherwise.

Thanks,

Andrew