Use defined IDs to reference DSI PHY clocks instead of using raw
numbers.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
---
arch/arm64/boot/dts/qcom/sar2130p.dtsi | 17 +++++++++--------
1 file changed, 9 insertions(+), 8 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sar2130p.dtsi b/arch/arm64/boot/dts/qcom/sar2130p.dtsi
index d9948360cc0198a768598f60302097e1143cf1fc..38f7869616ff01ece3799ced15c39375d629e364 100644
--- a/arch/arm64/boot/dts/qcom/sar2130p.dtsi
+++ b/arch/arm64/boot/dts/qcom/sar2130p.dtsi
@@ -3,6 +3,7 @@
* Copyright (c) 2024, Linaro Limited
*/
+#include <dt-bindings/clock/qcom,dsi-phy-28nm.h>
#include <dt-bindings/clock/qcom,rpmh.h>
#include <dt-bindings/clock/qcom,sar2130p-gcc.h>
#include <dt-bindings/clock/qcom,sar2130p-gpucc.h>
@@ -2237,8 +2238,8 @@ mdss_dsi0: dsi@ae94000 {
assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
<&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
- assigned-clock-parents = <&mdss_dsi0_phy 0>,
- <&mdss_dsi0_phy 1>;
+ assigned-clock-parents = <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
+ <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>;
operating-points-v2 = <&mdss_dsi_opp_table>;
@@ -2333,8 +2334,8 @@ mdss_dsi1: dsi@ae96000 {
assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>,
<&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>;
- assigned-clock-parents = <&mdss_dsi1_phy 0>,
- <&mdss_dsi1_phy 1>;
+ assigned-clock-parents = <&mdss_dsi1_phy DSI_BYTE_PLL_CLK>,
+ <&mdss_dsi1_phy DSI_PIXEL_PLL_CLK>;
operating-points-v2 = <&mdss_dsi_opp_table>;
@@ -2392,10 +2393,10 @@ dispcc: clock-controller@af00000 {
<&rpmhcc RPMH_CXO_CLK_A>,
<&gcc GCC_DISP_AHB_CLK>,
<&sleep_clk>,
- <&mdss_dsi0_phy 0>,
- <&mdss_dsi0_phy 1>,
- <&mdss_dsi1_phy 0>,
- <&mdss_dsi1_phy 1>,
+ <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
+ <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>,
+ <&mdss_dsi1_phy DSI_BYTE_PLL_CLK>,
+ <&mdss_dsi1_phy DSI_PIXEL_PLL_CLK>,
<&usb_dp_qmpphy QMP_USB43DP_DP_LINK_CLK>,
<&usb_dp_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>,
<0>, /* dp1 */
--
2.39.5