We currently log parse failures for ELD data and some disconnection events
as errors without rate limiting. These log messages can be triggered very
frequently in some situations, especially ELD parsing when there is nothing
connected to a HDMI port which will generate:

hdmi-audio-codec hdmi-audio-codec.1.auto: HDMI: Unknown ELD version 0

While there's doubtless work that could be done on reducing the number of
connection notification callbacks it's possible these may be legitimately
generated by poor quality physical connections so let's use rate limiting
to mitigate the log spam for the parse errors and lower the severity for
disconnect logging to debug level.

Signed-off-by: Mark Brown <broonie@kernel.org>
---
 sound/soc/codecs/hdac_hdmi.c | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

diff --git a/sound/soc/codecs/hdac_hdmi.c b/sound/soc/codecs/hdac_hdmi.c
index 1139a2754ca3..056d98154682 100644
--- a/sound/soc/codecs/hdac_hdmi.c
+++ b/sound/soc/codecs/hdac_hdmi.c
@@ -1232,7 +1232,8 @@ static int hdac_hdmi_parse_eld(struct hdac_device *hdev,
 						>> DRM_ELD_VER_SHIFT;
 
 	if (ver != ELD_VER_CEA_861D && ver != ELD_VER_PARTIAL) {
-		dev_err(&hdev->dev, "HDMI: Unknown ELD version %d\n", ver);
+		dev_err_ratelimited(&hdev->dev,
+				    "HDMI: Unknown ELD version %d\n", ver);
 		return -EINVAL;
 	}
 
@@ -1240,7 +1241,8 @@ static int hdac_hdmi_parse_eld(struct hdac_device *hdev,
 		DRM_ELD_MNL_MASK) >> DRM_ELD_MNL_SHIFT;
 
 	if (mnl > ELD_MAX_MNL) {
-		dev_err(&hdev->dev, "HDMI: MNL Invalid %d\n", mnl);
+		dev_err_ratelimited(&hdev->dev,
+				    "HDMI: MNL Invalid %d\n", mnl);
 		return -EINVAL;
 	}
 
@@ -1299,8 +1301,8 @@ static void hdac_hdmi_present_sense(struct hdac_hdmi_pin *pin,
 
 	if (!port->eld.monitor_present || !port->eld.eld_valid) {
 
-		dev_err(&hdev->dev, "%s: disconnect for pin:port %d:%d\n",
-						__func__, pin->nid, port->id);
+		dev_dbg(&hdev->dev, "%s: disconnect for pin:port %d:%d\n",
+			__func__, pin->nid, port->id);
 
 		/*
 		 * PCMs are not registered during device probe, so don't

---
base-commit: 19272b37aa4f83ca52bdf9c16d5d81bdd1354494
change-id: 20250613-asoc-hdmi-eld-logging-11bf756cff6d

Best regards,
-- 
Mark Brown <broonie@kernel.org>

On Fri, 13 Jun 2025 17:41:04 +0100, Mark Brown wrote:
> We currently log parse failures for ELD data and some disconnection events
> as errors without rate limiting. These log messages can be triggered very
> frequently in some situations, especially ELD parsing when there is nothing
> connected to a HDMI port which will generate:
> 
> hdmi-audio-codec hdmi-audio-codec.1.auto: HDMI: Unknown ELD version 0
> 
> [...]

Applied to

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-next

Thanks!

[1/1] ASoC: hdac_hdmi: Rate limit logging on connection and disconnection
      commit: c4ca928a6db1593802cd945f075a7e21dd0430c1

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark