Refactor Thead specific implementation of the ACLINT-SSWI irqchip.
Factor out generic code that serves both Thead and MIPS variants.
This generic part is according to the RISC-V draft spec [1].
Link: https://github.com/riscvarchive/riscv-aclint [1]
Signed-off-by: Vladimir Kondratiev <vladimir.kondratiev@mobileye.com>
---
drivers/irqchip/Kconfig | 16 ++++
drivers/irqchip/Makefile | 2 +-
...d-c900-aclint-sswi.c => irq-aclint-sswi.c} | 93 +++++++++++++------
3 files changed, 82 insertions(+), 29 deletions(-)
rename drivers/irqchip/{irq-thead-c900-aclint-sswi.c => irq-aclint-sswi.c} (67%)
diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig
index 0d196e447142..be9b54900482 100644
--- a/drivers/irqchip/Kconfig
+++ b/drivers/irqchip/Kconfig
@@ -634,12 +634,28 @@ config STARFIVE_JH8100_INTC
If you don't know what to do here, say Y.
+config ACLINT_SSWI
+ bool
+
+config MIPS_P8700_ACLINT_SSWI
+ bool "MIPS P8700 ACLINT S-mode IPI Interrupt Controller"
+ depends on RISCV
+ depends on SMP
+ select IRQ_DOMAIN_HIERARCHY
+ select GENERIC_IRQ_IPI_MUX
+ select ACLINT_SSWI
+ help
+ This enables support for MIPS P8700 specific ACLINT SSWI device
+
+ If you don't know what to do here, say Y.
+
config THEAD_C900_ACLINT_SSWI
bool "THEAD C9XX ACLINT S-mode IPI Interrupt Controller"
depends on RISCV
depends on SMP
select IRQ_DOMAIN_HIERARCHY
select GENERIC_IRQ_IPI_MUX
+ select ACLINT_SSWI
help
This enables support for T-HEAD specific ACLINT SSWI device
support.
diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile
index 23ca4959e6ce..0458d6c5d161 100644
--- a/drivers/irqchip/Makefile
+++ b/drivers/irqchip/Makefile
@@ -105,7 +105,7 @@ obj-$(CONFIG_RISCV_APLIC_MSI) += irq-riscv-aplic-msi.o
obj-$(CONFIG_RISCV_IMSIC) += irq-riscv-imsic-state.o irq-riscv-imsic-early.o irq-riscv-imsic-platform.o
obj-$(CONFIG_SIFIVE_PLIC) += irq-sifive-plic.o
obj-$(CONFIG_STARFIVE_JH8100_INTC) += irq-starfive-jh8100-intc.o
-obj-$(CONFIG_THEAD_C900_ACLINT_SSWI) += irq-thead-c900-aclint-sswi.o
+obj-$(CONFIG_ACLINT_SSWI) += irq-aclint-sswi.o
obj-$(CONFIG_IMX_IRQSTEER) += irq-imx-irqsteer.o
obj-$(CONFIG_IMX_INTMUX) += irq-imx-intmux.o
obj-$(CONFIG_IMX_MU_MSI) += irq-imx-mu-msi.o
diff --git a/drivers/irqchip/irq-thead-c900-aclint-sswi.c b/drivers/irqchip/irq-aclint-sswi.c
similarity index 67%
rename from drivers/irqchip/irq-thead-c900-aclint-sswi.c
rename to drivers/irqchip/irq-aclint-sswi.c
index 8ff6e7a1363b..ec21785df518 100644
--- a/drivers/irqchip/irq-thead-c900-aclint-sswi.c
+++ b/drivers/irqchip/irq-aclint-sswi.c
@@ -3,7 +3,7 @@
* Copyright (C) 2024 Inochi Amaoto <inochiama@gmail.com>
*/
-#define pr_fmt(fmt) "thead-c900-aclint-sswi: " fmt
+#define pr_fmt(fmt) "aclint-sswi: " fmt
#include <linux/cpu.h>
#include <linux/interrupt.h>
#include <linux/io.h>
@@ -21,56 +21,51 @@
#include <asm/sbi.h>
#include <asm/vendorid_list.h>
-#define THEAD_ACLINT_xSWI_REGISTER_SIZE 4
-
-#define THEAD_C9XX_CSR_SXSTATUS 0x5c0
-#define THEAD_C9XX_SXSTATUS_CLINTEE BIT(17)
-
static int sswi_ipi_virq __ro_after_init;
static DEFINE_PER_CPU(void __iomem *, sswi_cpu_regs);
-static void thead_aclint_sswi_ipi_send(unsigned int cpu)
+static void aclint_sswi_ipi_send(unsigned int cpu)
{
writel(0x1, per_cpu(sswi_cpu_regs, cpu));
}
-static void thead_aclint_sswi_ipi_clear(void)
+static void aclint_sswi_ipi_clear(void)
{
writel_relaxed(0x0, this_cpu_read(sswi_cpu_regs));
}
-static void thead_aclint_sswi_ipi_handle(struct irq_desc *desc)
+static void aclint_sswi_ipi_handle(struct irq_desc *desc)
{
struct irq_chip *chip = irq_desc_get_chip(desc);
chained_irq_enter(chip, desc);
csr_clear(CSR_IP, IE_SIE);
- thead_aclint_sswi_ipi_clear();
+ aclint_sswi_ipi_clear();
ipi_mux_process();
chained_irq_exit(chip, desc);
}
-static int thead_aclint_sswi_starting_cpu(unsigned int cpu)
+static int aclint_sswi_starting_cpu(unsigned int cpu)
{
enable_percpu_irq(sswi_ipi_virq, irq_get_trigger_type(sswi_ipi_virq));
return 0;
}
-static int thead_aclint_sswi_dying_cpu(unsigned int cpu)
+static int aclint_sswi_dying_cpu(unsigned int cpu)
{
- thead_aclint_sswi_ipi_clear();
+ aclint_sswi_ipi_clear();
disable_percpu_irq(sswi_ipi_virq);
return 0;
}
-static int __init thead_aclint_sswi_parse_irq(struct fwnode_handle *fwnode,
- void __iomem *reg)
+static int __init aclint_sswi_parse_irq(struct fwnode_handle *fwnode,
+ void __iomem *reg)
{
struct of_phandle_args parent;
unsigned long hartid;
@@ -97,7 +92,7 @@ static int __init thead_aclint_sswi_parse_irq(struct fwnode_handle *fwnode,
cpu = riscv_hartid_to_cpuid(hartid);
- per_cpu(sswi_cpu_regs, cpu) = reg + i * THEAD_ACLINT_xSWI_REGISTER_SIZE;
+ per_cpu(sswi_cpu_regs, cpu) = reg + hart_index * 4;
}
pr_info("%pfwP: register %u CPU%s\n", fwnode, contexts, str_plural(contexts));
@@ -105,17 +100,12 @@ static int __init thead_aclint_sswi_parse_irq(struct fwnode_handle *fwnode,
return 0;
}
-static int __init thead_aclint_sswi_probe(struct fwnode_handle *fwnode)
+static int __init aclint_sswi_probe(struct fwnode_handle *fwnode)
{
struct irq_domain *domain;
void __iomem *reg;
int virq, rc;
- /* If it is T-HEAD CPU, check whether SSWI is enabled */
- if (riscv_cached_mvendorid(0) == THEAD_VENDOR_ID &&
- !(csr_read(THEAD_C9XX_CSR_SXSTATUS) & THEAD_C9XX_SXSTATUS_CLINTEE))
- return -ENOTSUPP;
-
if (!is_of_node(fwnode))
return -EINVAL;
@@ -124,7 +114,7 @@ static int __init thead_aclint_sswi_probe(struct fwnode_handle *fwnode)
return -ENOMEM;
/* Parse SSWI setting */
- rc = thead_aclint_sswi_parse_irq(fwnode, reg);
+ rc = aclint_sswi_parse_irq(fwnode, reg);
if (rc < 0)
return rc;
@@ -146,22 +136,68 @@ static int __init thead_aclint_sswi_probe(struct fwnode_handle *fwnode)
}
/* Register SSWI irq and handler */
- virq = ipi_mux_create(BITS_PER_BYTE, thead_aclint_sswi_ipi_send);
+ virq = ipi_mux_create(BITS_PER_BYTE, aclint_sswi_ipi_send);
if (virq <= 0) {
pr_err("unable to create muxed IPIs\n");
irq_dispose_mapping(sswi_ipi_virq);
return virq < 0 ? virq : -ENOMEM;
}
- irq_set_chained_handler(sswi_ipi_virq, thead_aclint_sswi_ipi_handle);
+ irq_set_chained_handler(sswi_ipi_virq, aclint_sswi_ipi_handle);
cpuhp_setup_state(CPUHP_AP_IRQ_THEAD_ACLINT_SSWI_STARTING,
- "irqchip/thead-aclint-sswi:starting",
- thead_aclint_sswi_starting_cpu,
- thead_aclint_sswi_dying_cpu);
+ "irqchip/aclint-sswi:starting",
+ aclint_sswi_starting_cpu,
+ aclint_sswi_dying_cpu);
riscv_ipi_set_virq_range(virq, BITS_PER_BYTE);
+ return 0;
+}
+
+#if defined(CONFIG_MIPS_P8700_ACLINT_SSWI)
+/* generic/MIPS variant */
+static int __init generic_aclint_sswi_probe(struct fwnode_handle *fwnode)
+{
+ int rc;
+
+ rc = aclint_sswi_probe(fwnode);
+ if (rc)
+ return rc;
+
+ /* Announce that SSWI is providing IPIs */
+ pr_info("providing IPIs using ACLINT SSWI\n");
+
+ return 0;
+}
+
+static int __init generic_aclint_sswi_early_probe(struct device_node *node,
+ struct device_node *parent)
+{
+ return generic_aclint_sswi_probe(&node->fwnode);
+}
+IRQCHIP_DECLARE(generic_aclint_sswi, "mips,p8700-aclint-sswi", generic_aclint_sswi_early_probe);
+#endif /* CONFIG_MIPS_P8700_ACLINT_SSWI */
+
+#if defined(CONFIG_THEAD_C900_ACLINT_SSWI)
+
+#define THEAD_C9XX_CSR_SXSTATUS 0x5c0
+#define THEAD_C9XX_SXSTATUS_CLINTEE BIT(17)
+
+/* THEAD variant */
+static int __init thead_aclint_sswi_probe(struct fwnode_handle *fwnode)
+{
+ int rc;
+
+ /* If it is T-HEAD CPU, check whether SSWI is enabled */
+ if (riscv_cached_mvendorid(0) == THEAD_VENDOR_ID &&
+ !(csr_read(THEAD_C9XX_CSR_SXSTATUS) & THEAD_C9XX_SXSTATUS_CLINTEE))
+ return -ENOTSUPP;
+
+ rc = aclint_sswi_probe(fwnode);
+ if (rc)
+ return rc;
+
/* Announce that SSWI is providing IPIs */
pr_info("providing IPIs using THEAD ACLINT SSWI\n");
@@ -174,3 +210,4 @@ static int __init thead_aclint_sswi_early_probe(struct device_node *node,
return thead_aclint_sswi_probe(&node->fwnode);
}
IRQCHIP_DECLARE(thead_aclint_sswi, "thead,c900-aclint-sswi", thead_aclint_sswi_early_probe);
+#endif /* CONFIG_THEAD_C900_ACLINT_SSWI */
--
2.43.0On Tue, Jun 10 2025 at 13:05, Vladimir Kondratiev wrote:
> +config ACLINT_SSWI
> + bool
> +
> +config MIPS_P8700_ACLINT_SSWI
> + bool "MIPS P8700 ACLINT S-mode IPI Interrupt Controller"
> + depends on RISCV
> + depends on SMP
> + select IRQ_DOMAIN_HIERARCHY
> + select GENERIC_IRQ_IPI_MUX
> + select ACLINT_SSWI
> + help
> + This enables support for MIPS P8700 specific ACLINT SSWI device
> +
> + If you don't know what to do here, say Y.
> +
> config THEAD_C900_ACLINT_SSWI
> bool "THEAD C9XX ACLINT S-mode IPI Interrupt Controller"
> depends on RISCV
> depends on SMP
> select IRQ_DOMAIN_HIERARCHY
> select GENERIC_IRQ_IPI_MUX
> + select ACLINT_SSWI
> help
> This enables support for T-HEAD specific ACLINT SSWI device
> support.
That's just exactly the same thing twice for no value. Just rename it to
ACLINT_SSWI and have a list of supported chips in the help text.
The only issue with the rename is, that oldconfig will drop the then
non-existing THEAD_C900_ACLINT_SSWI entry in the previous config. That's
not the end of the world and if really desired this can be solved by
having:
config ACLINT_SSWI
bool "RISCV ACLINT ...."
depends on RISCV
depends on SMP
select IRQ_DOMAIN_HIERARCHY
select GENERIC_IRQ_IPI_MUX
select ACLINT_SSWI
help
This enables support for ACLINT SSWI device on THEAD C9XX and
MIPS P8700 devices.
# Backwards compatibility so oldconfig does not drop it.
config THEAD_C900_ACLINT_SSWI
select ACLINT_SSWI
Or something like that.
Thanks,
tglx
On Tue, Jun 10, 2025 at 01:05:37PM +0300, Vladimir Kondratiev wrote:
> Refactor Thead specific implementation of the ACLINT-SSWI irqchip.
> Factor out generic code that serves both Thead and MIPS variants.
> This generic part is according to the RISC-V draft spec [1].
>
> Link: https://github.com/riscvarchive/riscv-aclint [1]
>
> Signed-off-by: Vladimir Kondratiev <vladimir.kondratiev@mobileye.com>
> ---
> drivers/irqchip/Kconfig | 16 ++++
> drivers/irqchip/Makefile | 2 +-
> ...d-c900-aclint-sswi.c => irq-aclint-sswi.c} | 93 +++++++++++++------
> 3 files changed, 82 insertions(+), 29 deletions(-)
> rename drivers/irqchip/{irq-thead-c900-aclint-sswi.c => irq-aclint-sswi.c} (67%)
>
> diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig
> index 0d196e447142..be9b54900482 100644
> --- a/drivers/irqchip/Kconfig
> +++ b/drivers/irqchip/Kconfig
> @@ -634,12 +634,28 @@ config STARFIVE_JH8100_INTC
>
> If you don't know what to do here, say Y.
>
> +config ACLINT_SSWI
> + bool
> +
> +config MIPS_P8700_ACLINT_SSWI
> + bool "MIPS P8700 ACLINT S-mode IPI Interrupt Controller"
> + depends on RISCV
> + depends on SMP
> + select IRQ_DOMAIN_HIERARCHY
> + select GENERIC_IRQ_IPI_MUX
> + select ACLINT_SSWI
> + help
> + This enables support for MIPS P8700 specific ACLINT SSWI device
> +
> + If you don't know what to do here, say Y.
> +
> config THEAD_C900_ACLINT_SSWI
> bool "THEAD C9XX ACLINT S-mode IPI Interrupt Controller"
> depends on RISCV
> depends on SMP
> select IRQ_DOMAIN_HIERARCHY
> select GENERIC_IRQ_IPI_MUX
> + select ACLINT_SSWI
> help
> This enables support for T-HEAD specific ACLINT SSWI device
> support.
> diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile
> index 23ca4959e6ce..0458d6c5d161 100644
> --- a/drivers/irqchip/Makefile
> +++ b/drivers/irqchip/Makefile
> @@ -105,7 +105,7 @@ obj-$(CONFIG_RISCV_APLIC_MSI) += irq-riscv-aplic-msi.o
> obj-$(CONFIG_RISCV_IMSIC) += irq-riscv-imsic-state.o irq-riscv-imsic-early.o irq-riscv-imsic-platform.o
> obj-$(CONFIG_SIFIVE_PLIC) += irq-sifive-plic.o
> obj-$(CONFIG_STARFIVE_JH8100_INTC) += irq-starfive-jh8100-intc.o
> -obj-$(CONFIG_THEAD_C900_ACLINT_SSWI) += irq-thead-c900-aclint-sswi.o
> +obj-$(CONFIG_ACLINT_SSWI) += irq-aclint-sswi.o
> obj-$(CONFIG_IMX_IRQSTEER) += irq-imx-irqsteer.o
> obj-$(CONFIG_IMX_INTMUX) += irq-imx-intmux.o
> obj-$(CONFIG_IMX_MU_MSI) += irq-imx-mu-msi.o
> diff --git a/drivers/irqchip/irq-thead-c900-aclint-sswi.c b/drivers/irqchip/irq-aclint-sswi.c
> similarity index 67%
> rename from drivers/irqchip/irq-thead-c900-aclint-sswi.c
> rename to drivers/irqchip/irq-aclint-sswi.c
> index 8ff6e7a1363b..ec21785df518 100644
> --- a/drivers/irqchip/irq-thead-c900-aclint-sswi.c
> +++ b/drivers/irqchip/irq-aclint-sswi.c
> @@ -3,7 +3,7 @@
> * Copyright (C) 2024 Inochi Amaoto <inochiama@gmail.com>
> */
>
> -#define pr_fmt(fmt) "thead-c900-aclint-sswi: " fmt
> +#define pr_fmt(fmt) "aclint-sswi: " fmt
> #include <linux/cpu.h>
> #include <linux/interrupt.h>
> #include <linux/io.h>
> @@ -21,56 +21,51 @@
> #include <asm/sbi.h>
> #include <asm/vendorid_list.h>
>
> -#define THEAD_ACLINT_xSWI_REGISTER_SIZE 4
> -
> -#define THEAD_C9XX_CSR_SXSTATUS 0x5c0
> -#define THEAD_C9XX_SXSTATUS_CLINTEE BIT(17)
> -
> static int sswi_ipi_virq __ro_after_init;
> static DEFINE_PER_CPU(void __iomem *, sswi_cpu_regs);
>
> -static void thead_aclint_sswi_ipi_send(unsigned int cpu)
> +static void aclint_sswi_ipi_send(unsigned int cpu)
> {
> writel(0x1, per_cpu(sswi_cpu_regs, cpu));
> }
>
> -static void thead_aclint_sswi_ipi_clear(void)
> +static void aclint_sswi_ipi_clear(void)
> {
> writel_relaxed(0x0, this_cpu_read(sswi_cpu_regs));
> }
>
> -static void thead_aclint_sswi_ipi_handle(struct irq_desc *desc)
> +static void aclint_sswi_ipi_handle(struct irq_desc *desc)
> {
> struct irq_chip *chip = irq_desc_get_chip(desc);
>
> chained_irq_enter(chip, desc);
>
> csr_clear(CSR_IP, IE_SIE);
> - thead_aclint_sswi_ipi_clear();
> + aclint_sswi_ipi_clear();
>
> ipi_mux_process();
>
> chained_irq_exit(chip, desc);
> }
>
> -static int thead_aclint_sswi_starting_cpu(unsigned int cpu)
> +static int aclint_sswi_starting_cpu(unsigned int cpu)
> {
> enable_percpu_irq(sswi_ipi_virq, irq_get_trigger_type(sswi_ipi_virq));
>
> return 0;
> }
>
> -static int thead_aclint_sswi_dying_cpu(unsigned int cpu)
> +static int aclint_sswi_dying_cpu(unsigned int cpu)
> {
> - thead_aclint_sswi_ipi_clear();
> + aclint_sswi_ipi_clear();
>
> disable_percpu_irq(sswi_ipi_virq);
>
> return 0;
> }
>
> -static int __init thead_aclint_sswi_parse_irq(struct fwnode_handle *fwnode,
> - void __iomem *reg)
> +static int __init aclint_sswi_parse_irq(struct fwnode_handle *fwnode,
> + void __iomem *reg)
> {
> struct of_phandle_args parent;
> unsigned long hartid;
> @@ -97,7 +92,7 @@ static int __init thead_aclint_sswi_parse_irq(struct fwnode_handle *fwnode,
>
> cpu = riscv_hartid_to_cpuid(hartid);
>
> - per_cpu(sswi_cpu_regs, cpu) = reg + i * THEAD_ACLINT_xSWI_REGISTER_SIZE;
> + per_cpu(sswi_cpu_regs, cpu) = reg + hart_index * 4;
> }
>
> pr_info("%pfwP: register %u CPU%s\n", fwnode, contexts, str_plural(contexts));
> @@ -105,17 +100,12 @@ static int __init thead_aclint_sswi_parse_irq(struct fwnode_handle *fwnode,
> return 0;
> }
>
> -static int __init thead_aclint_sswi_probe(struct fwnode_handle *fwnode)
> +static int __init aclint_sswi_probe(struct fwnode_handle *fwnode)
> {
> struct irq_domain *domain;
> void __iomem *reg;
> int virq, rc;
>
> - /* If it is T-HEAD CPU, check whether SSWI is enabled */
> - if (riscv_cached_mvendorid(0) == THEAD_VENDOR_ID &&
> - !(csr_read(THEAD_C9XX_CSR_SXSTATUS) & THEAD_C9XX_SXSTATUS_CLINTEE))
> - return -ENOTSUPP;
> -
> if (!is_of_node(fwnode))
> return -EINVAL;
>
> @@ -124,7 +114,7 @@ static int __init thead_aclint_sswi_probe(struct fwnode_handle *fwnode)
> return -ENOMEM;
>
> /* Parse SSWI setting */
> - rc = thead_aclint_sswi_parse_irq(fwnode, reg);
> + rc = aclint_sswi_parse_irq(fwnode, reg);
> if (rc < 0)
> return rc;
>
> @@ -146,22 +136,68 @@ static int __init thead_aclint_sswi_probe(struct fwnode_handle *fwnode)
> }
>
> /* Register SSWI irq and handler */
> - virq = ipi_mux_create(BITS_PER_BYTE, thead_aclint_sswi_ipi_send);
> + virq = ipi_mux_create(BITS_PER_BYTE, aclint_sswi_ipi_send);
> if (virq <= 0) {
> pr_err("unable to create muxed IPIs\n");
> irq_dispose_mapping(sswi_ipi_virq);
> return virq < 0 ? virq : -ENOMEM;
> }
>
> - irq_set_chained_handler(sswi_ipi_virq, thead_aclint_sswi_ipi_handle);
> + irq_set_chained_handler(sswi_ipi_virq, aclint_sswi_ipi_handle);
>
> cpuhp_setup_state(CPUHP_AP_IRQ_THEAD_ACLINT_SSWI_STARTING,
> - "irqchip/thead-aclint-sswi:starting",
> - thead_aclint_sswi_starting_cpu,
> - thead_aclint_sswi_dying_cpu);
> + "irqchip/aclint-sswi:starting",
> + aclint_sswi_starting_cpu,
> + aclint_sswi_dying_cpu);
>
> riscv_ipi_set_virq_range(virq, BITS_PER_BYTE);
>
> + return 0;
> +}
> +
> +#if defined(CONFIG_MIPS_P8700_ACLINT_SSWI)
> +/* generic/MIPS variant */
I do not think there is a must to add these defines
Regards,
Inochi
> +static int __init generic_aclint_sswi_probe(struct fwnode_handle *fwnode)
> +{
> + int rc;
> +
> + rc = aclint_sswi_probe(fwnode);
> + if (rc)
> + return rc;
> +
> + /* Announce that SSWI is providing IPIs */
> + pr_info("providing IPIs using ACLINT SSWI\n");
> +
> + return 0;
> +}
> +
> +static int __init generic_aclint_sswi_early_probe(struct device_node *node,
> + struct device_node *parent)
> +{
> + return generic_aclint_sswi_probe(&node->fwnode);
> +}
> +IRQCHIP_DECLARE(generic_aclint_sswi, "mips,p8700-aclint-sswi", generic_aclint_sswi_early_probe);
> +#endif /* CONFIG_MIPS_P8700_ACLINT_SSWI */
> +
> +#if defined(CONFIG_THEAD_C900_ACLINT_SSWI)
> +
> +#define THEAD_C9XX_CSR_SXSTATUS 0x5c0
> +#define THEAD_C9XX_SXSTATUS_CLINTEE BIT(17)
> +
> +/* THEAD variant */
> +static int __init thead_aclint_sswi_probe(struct fwnode_handle *fwnode)
> +{
> + int rc;
> +
> + /* If it is T-HEAD CPU, check whether SSWI is enabled */
> + if (riscv_cached_mvendorid(0) == THEAD_VENDOR_ID &&
> + !(csr_read(THEAD_C9XX_CSR_SXSTATUS) & THEAD_C9XX_SXSTATUS_CLINTEE))
> + return -ENOTSUPP;
> +
> + rc = aclint_sswi_probe(fwnode);
> + if (rc)
> + return rc;
> +
> /* Announce that SSWI is providing IPIs */
> pr_info("providing IPIs using THEAD ACLINT SSWI\n");
>
> @@ -174,3 +210,4 @@ static int __init thead_aclint_sswi_early_probe(struct device_node *node,
> return thead_aclint_sswi_probe(&node->fwnode);
> }
> IRQCHIP_DECLARE(thead_aclint_sswi, "thead,c900-aclint-sswi", thead_aclint_sswi_early_probe);
> +#endif /* CONFIG_THEAD_C900_ACLINT_SSWI */
> --
> 2.43.0
>
© 2016 - 2025 Red Hat, Inc.