Thanks to Heiko's work getting OTP working on the RK3576, we can specify
the thermal sensor trim values which are stored there now, and with my
driver addition to rockchip_thermal, we can make use of these.

Add them to the devicetree for the SoC.

Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
---
 arch/arm64/boot/dts/rockchip/rk3576.dtsi | 57 ++++++++++++++++++++++++++++++++
 1 file changed, 57 insertions(+)

diff --git a/arch/arm64/boot/dts/rockchip/rk3576.dtsi b/arch/arm64/boot/dts/rockchip/rk3576.dtsi
index dbc527ec60cfac0bbdb881a27d3ff765366be99e..c388fbb510ade0f06e64c1025dcfa59b8187bc97 100644
--- a/arch/arm64/boot/dts/rockchip/rk3576.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3576.dtsi
@@ -1919,6 +1919,30 @@ gpu_leakage: gpu-leakage@21 {
 			log_leakage: log-leakage@22 {
 				reg = <0x22 0x1>;
 			};
+			bigcore_tsadc_trim: bigcore-tsadc-trim@24 {
+				reg = <0x24 0x2>;
+				bits = <0 10>;
+			};
+			litcore_tsadc_trim: litcore-tsadc-trim@26 {
+				reg = <0x26 0x2>;
+				bits = <0 10>;
+			};
+			ddr_tsadc_trim: ddr-tsadc-trim@28 {
+				reg = <0x28 0x2>;
+				bits = <0 10>;
+			};
+			npu_tsadc_trim: npu-tsadc-trim@2a {
+				reg = <0x2a 0x2>;
+				bits = <0 10>;
+			};
+			gpu_tsadc_trim: gpu-tsadc-trim@2c {
+				reg = <0x2c 0x2>;
+				bits = <0 10>;
+			};
+			soc_tsadc_trim: soc-tsadc-trim@64 {
+				reg = <0x64 0x2>;
+				bits = <0 10>;
+			};
 		};
 
 		sai0: sai@2a600000 {
@@ -2443,6 +2467,39 @@ tsadc: tsadc@2ae70000 {
 			rockchip,hw-tshut-temp = <120000>;
 			rockchip,hw-tshut-mode = <0>; /* tshut mode 0:CRU 1:GPIO */
 			rockchip,hw-tshut-polarity = <0>; /* tshut polarity 0:LOW 1:HIGH */
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			sensor@0 {
+				reg = <0>;
+				nvmem-cells = <&soc_tsadc_trim>;
+				nvmem-cell-names = "trim";
+			};
+			sensor@1 {
+				reg = <1>;
+				nvmem-cells = <&bigcore_tsadc_trim>;
+				nvmem-cell-names = "trim";
+			};
+			sensor@2 {
+				reg = <2>;
+				nvmem-cells = <&litcore_tsadc_trim>;
+				nvmem-cell-names = "trim";
+			};
+			sensor@3 {
+				reg = <3>;
+				nvmem-cells = <&ddr_tsadc_trim>;
+				nvmem-cell-names = "trim";
+			};
+			sensor@4 {
+				reg = <4>;
+				nvmem-cells = <&npu_tsadc_trim>;
+				nvmem-cell-names = "trim";
+			};
+			sensor@5 {
+				reg = <5>;
+				nvmem-cells = <&gpu_tsadc_trim>;
+				nvmem-cell-names = "trim";
+			};
 		};
 
 		i2c9: i2c@2ae80000 {

-- 
2.49.0