From: Jorge Ramirez-Ortiz <jorge@foundries.io>
Make sure the interrupt handler is initialized before the interrupt is
registered.
If the IRQ is registered before hfi_create(), it's possible that an
interrupt fires before the handler setup is complete, leading to a NULL
dereference.
This error condition has been observed during sytem boot on Rb3Gen2.
Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez@oss.qualcomm.com>
---
drivers/media/platform/qcom/venus/core.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/media/platform/qcom/venus/core.c b/drivers/media/platform/qcom/venus/core.c
index 77d48578ecd2..04641a7dcc98 100644
--- a/drivers/media/platform/qcom/venus/core.c
+++ b/drivers/media/platform/qcom/venus/core.c
@@ -424,13 +424,13 @@ static int venus_probe(struct platform_device *pdev)
INIT_DELAYED_WORK(&core->work, venus_sys_error_handler);
init_waitqueue_head(&core->sys_err_done);
- ret = devm_request_threaded_irq(dev, core->irq, hfi_isr, venus_isr_thread,
- IRQF_TRIGGER_HIGH | IRQF_ONESHOT,
- "venus", core);
+ ret = hfi_create(core, &venus_core_ops);
if (ret)
goto err_core_put;
- ret = hfi_create(core, &venus_core_ops);
+ ret = devm_request_threaded_irq(dev, core->irq, hfi_isr, venus_isr_thread,
+ IRQF_TRIGGER_HIGH | IRQF_ONESHOT,
+ "venus", core);
if (ret)
goto err_core_put;
--
2.34.1