drivers/pmdomain/core.c | 27 +++++++++++++++++++++++++++ drivers/remoteproc/imx_rproc.c | 33 ++++++++++++++++++++++++++------- include/linux/pm_domain.h | 6 ++++++ 3 files changed, 59 insertions(+), 7 deletions(-)
From: Hiago De Franco <hiago.franco@toradex.com>
This patch series depends on Ulf's patches that are currently under review,
"pmdomain: Add generic ->sync_state() support to genpd" [1]. Without them,
this series is not going to work.
For the i.MX8X and i.MX8 family SoCs, currently when the remotecore is
started by the bootloader and the M core and A core are in the same
partition, the driver is not capable to detect the remote core and
report the correct state of it.
This patch series implement a new function, dev_pm_genpd_is_on(), which
returns the power status of a given power domain (M core power domains
IMX_SC_R_M4_0_PID0 and IMX_SC_R_M4_0_MU_1A in this case). If it is already
powered on, the driver will attach to it.
Finally, the imx_rproc_clk_enable() function was also changed to make it
return before dev_clk_get() is called, as it currently generates an SCU
fault reset if the remote core is already running and the kernel tries
to enable the clock again. These changes are a follow up from a v1 sent
to imx_rproc [2] and from a reported regression [3].
[1] https://lore.kernel.org/all/20250523134025.75130-1-ulf.hansson@linaro.org/
[2] https://lore.kernel.org/lkml/20250423155131.101473-1-hiagofranco@gmail.com/
[3] https://lore.kernel.org/lkml/20250404141713.ac2ntcsjsf7epdfa@hiago-nb/
v4:
- dev_pm_genpd_is_on() introduced to drivers/pmdomain/core.c
- imx_rproc.c updated to use the generic power domains instead of the
SCU API call, which depends on Ulf's patch series.
v3:
- https://lore.kernel.org/all/20250519171514.61974-1-hiagofranco@gmail.com/
v2:
- https://lore.kernel.org/lkml/20250507160056.11876-1-hiagofranco@gmail.com/
v1:
- https://lore.kernel.org/lkml/20250505154849.64889-1-hiagofranco@gmail.com/
Hiago De Franco (3):
pmdomain: core: introduce dev_pm_genpd_is_on
remoteproc: imx_rproc: skip clock enable when M-core is managed by the
SCU
remoteproc: imx_rproc: detect and attach to pre-booted remote cores
drivers/pmdomain/core.c | 27 +++++++++++++++++++++++++++
drivers/remoteproc/imx_rproc.c | 33 ++++++++++++++++++++++++++-------
include/linux/pm_domain.h | 6 ++++++
3 files changed, 59 insertions(+), 7 deletions(-)
--
2.39.5
On Mon, 2 Jun 2025 at 15:19, Hiago De Franco <hiagofranco@gmail.com> wrote: > > From: Hiago De Franco <hiago.franco@toradex.com> > > This patch series depends on Ulf's patches that are currently under review, > "pmdomain: Add generic ->sync_state() support to genpd" [1]. Without them, > this series is not going to work. > > For the i.MX8X and i.MX8 family SoCs, currently when the remotecore is > started by the bootloader and the M core and A core are in the same > partition, the driver is not capable to detect the remote core and > report the correct state of it. > > This patch series implement a new function, dev_pm_genpd_is_on(), which > returns the power status of a given power domain (M core power domains > IMX_SC_R_M4_0_PID0 and IMX_SC_R_M4_0_MU_1A in this case). If it is already > powered on, the driver will attach to it. > > Finally, the imx_rproc_clk_enable() function was also changed to make it > return before dev_clk_get() is called, as it currently generates an SCU > fault reset if the remote core is already running and the kernel tries > to enable the clock again. These changes are a follow up from a v1 sent > to imx_rproc [2] and from a reported regression [3]. > > [1] https://lore.kernel.org/all/20250523134025.75130-1-ulf.hansson@linaro.org/ > [2] https://lore.kernel.org/lkml/20250423155131.101473-1-hiagofranco@gmail.com/ > [3] https://lore.kernel.org/lkml/20250404141713.ac2ntcsjsf7epdfa@hiago-nb/ > > v4: > - dev_pm_genpd_is_on() introduced to drivers/pmdomain/core.c > - imx_rproc.c updated to use the generic power domains instead of the > SCU API call, which depends on Ulf's patch series. > > v3: > - https://lore.kernel.org/all/20250519171514.61974-1-hiagofranco@gmail.com/ > > v2: > - https://lore.kernel.org/lkml/20250507160056.11876-1-hiagofranco@gmail.com/ > > v1: > - https://lore.kernel.org/lkml/20250505154849.64889-1-hiagofranco@gmail.com/ > > Hiago De Franco (3): > pmdomain: core: introduce dev_pm_genpd_is_on > remoteproc: imx_rproc: skip clock enable when M-core is managed by the > SCU > remoteproc: imx_rproc: detect and attach to pre-booted remote cores > > drivers/pmdomain/core.c | 27 +++++++++++++++++++++++++++ > drivers/remoteproc/imx_rproc.c | 33 ++++++++++++++++++++++++++------- > include/linux/pm_domain.h | 6 ++++++ > 3 files changed, 59 insertions(+), 7 deletions(-) > We are awaiting further feedback on the other series [1]. As you have tested it, may I add your tested-by tag for it? Or perhaps if you can send a reply to the cover-letter for it? Anyway, for $subject series: Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Kind regards Uffe
On Tue, Jun 03, 2025 at 02:09:14PM +0200, Ulf Hansson wrote: > On Mon, 2 Jun 2025 at 15:19, Hiago De Franco <hiagofranco@gmail.com> wrote: > > > > From: Hiago De Franco <hiago.franco@toradex.com> > > > > This patch series depends on Ulf's patches that are currently under review, > > "pmdomain: Add generic ->sync_state() support to genpd" [1]. Without them, > > this series is not going to work. > > > > For the i.MX8X and i.MX8 family SoCs, currently when the remotecore is > > started by the bootloader and the M core and A core are in the same > > partition, the driver is not capable to detect the remote core and > > report the correct state of it. > > > > This patch series implement a new function, dev_pm_genpd_is_on(), which > > returns the power status of a given power domain (M core power domains > > IMX_SC_R_M4_0_PID0 and IMX_SC_R_M4_0_MU_1A in this case). If it is already > > powered on, the driver will attach to it. > > > > Finally, the imx_rproc_clk_enable() function was also changed to make it > > return before dev_clk_get() is called, as it currently generates an SCU > > fault reset if the remote core is already running and the kernel tries > > to enable the clock again. These changes are a follow up from a v1 sent > > to imx_rproc [2] and from a reported regression [3]. > > > > [1] https://lore.kernel.org/all/20250523134025.75130-1-ulf.hansson@linaro.org/ > > [2] https://lore.kernel.org/lkml/20250423155131.101473-1-hiagofranco@gmail.com/ > > [3] https://lore.kernel.org/lkml/20250404141713.ac2ntcsjsf7epdfa@hiago-nb/ > > > > v4: > > - dev_pm_genpd_is_on() introduced to drivers/pmdomain/core.c > > - imx_rproc.c updated to use the generic power domains instead of the > > SCU API call, which depends on Ulf's patch series. > > > > v3: > > - https://lore.kernel.org/all/20250519171514.61974-1-hiagofranco@gmail.com/ > > > > v2: > > - https://lore.kernel.org/lkml/20250507160056.11876-1-hiagofranco@gmail.com/ > > > > v1: > > - https://lore.kernel.org/lkml/20250505154849.64889-1-hiagofranco@gmail.com/ > > > > Hiago De Franco (3): > > pmdomain: core: introduce dev_pm_genpd_is_on > > remoteproc: imx_rproc: skip clock enable when M-core is managed by the > > SCU > > remoteproc: imx_rproc: detect and attach to pre-booted remote cores > > > > drivers/pmdomain/core.c | 27 +++++++++++++++++++++++++++ > > drivers/remoteproc/imx_rproc.c | 33 ++++++++++++++++++++++++++------- > > include/linux/pm_domain.h | 6 ++++++ > > 3 files changed, 59 insertions(+), 7 deletions(-) > > > > We are awaiting further feedback on the other series [1]. As you have > tested it, may I add your tested-by tag for it? Or perhaps if you can > send a reply to the cover-letter for it? > > Anyway, for $subject series: > Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Sure, I replied there with my Tested-by. Thanks for the review. > > Kind regards > Uffe > Best Regards, Hiago.
© 2016 - 2026 Red Hat, Inc.