From: Mohammad Rafi Shaik <quic_mohs@quicinc.com>

Audio support is now enabled on the qcs6490-RB3Gen2 and qcm6490-idp boards.
The updates include adding the necessary audio device tree support and the required
dependencies.

Both the qcs6490-RB3Gen2 and qcm6490-idp boards are derived from the same SoC 
platform. Therefore, the audio support changes are included in a single patch 
set for consistency and ease of maintenance.

Changes in [v4]:
	- Fix DT binding errors by adding dt-binding clock changes for ADSP base platform.
	- Link to V3 : https://lore.kernel.org/linux-arm-msm/20250520062618.2765109-1-quic_pkumpatl@quicinc.com/

Changes in [v3]:
	- Added protection-domain in gpr services.
	- Addressed the review commnets from Konrad Dybcio.
	- Fix DT binding errors reported by Rob Herring.
	- Link to V2 : https://lore.kernel.org/linux-arm-msm/20250429092430.21477-1-quic_pkumpatl@quicinc.com/

Changes in [v2]:
	- Created dtsi file to handle common audio nodes to support Audioreach.
	- Addressed the review comments.
	- Link to V1 : https://lore.kernel.org/linux-arm-msm/20250317054151.6095-2-quic_pkumpatl@quicinc.com/

Mohammad Rafi Shaik (8):
  arm64: dts: qcom: qcs6490-audioreach: Add gpr node
  ASoC: dt-bindings: qcom: Manage clock settings for ADSP solution
  arm64: dts: qcom: sc7280: Add WSA SoundWire and LPASS support
  arm64: dts: qcom: qcs6490-audioreach: Modify LPASS macros clock
    settings for audioreach
  arm64: dts: qcom: qcs6490-rb3gen2: Add WSA8830 speakers amplifier
  arm64: dts: qcom: qcs6490-rb3gen2: Add sound card
  arm64: dts: qcom: qcm6490-idp: Add WSA8830 speakers and WCD9370
    headset codec
  arm64: dts: qcom: qcm6490-idp: Add sound card

 .../qcom,sc7280-lpass-lpi-pinctrl.yaml        |  10 +
 .../bindings/sound/qcom,lpass-va-macro.yaml   |  12 +-
 .../bindings/sound/qcom,lpass-wsa-macro.yaml  |  24 ++-
 arch/arm64/boot/dts/qcom/qcm6490-idp.dts      | 180 ++++++++++++++++++
 .../boot/dts/qcom/qcs6490-audioreach.dtsi     | 158 +++++++++++++++
 arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts  |  80 ++++++++
 arch/arm64/boot/dts/qcom/sc7280.dtsi          |  78 +++++++-
 7 files changed, 535 insertions(+), 7 deletions(-)
 create mode 100644 arch/arm64/boot/dts/qcom/qcs6490-audioreach.dtsi


base-commit: 176e917e010cb7dcc605f11d2bc33f304292482b
-- 
2.34.1

On Tue May 27, 2025 at 12:12 PM BST, Prasad Kumpatla wrote:
> From: Mohammad Rafi Shaik <quic_mohs@quicinc.com>
>
> Audio support is now enabled on the qcs6490-RB3Gen2 and qcm6490-idp boards.
> The updates include adding the necessary audio device tree support and the required
> dependencies.

Do you have topology file and mixers commands (or UCM profile) to test this?

I already asked but I don't see any replies. How this can be tested?

Thanks,
Alexey

On 5/27/2025 7:47 PM, Alexey Klimov wrote:
> On Tue May 27, 2025 at 12:12 PM BST, Prasad Kumpatla wrote:
>> From: Mohammad Rafi Shaik <quic_mohs@quicinc.com>
>>
>> Audio support is now enabled on the qcs6490-RB3Gen2 and qcm6490-idp boards.
>> The updates include adding the necessary audio device tree support and the required
>> dependencies.
> 
> Do you have topology file and mixers commands (or UCM profile) to test this?
> 
> I already asked but I don't see any replies. How this can be tested?

please use these below UCM config files
https://github.com/mohsRafi/alsa-ucm-conf/blob/qcs6490_qcm6490_hifi/ucm2/Qualcomm/qcs6490/QCS6490-RB3Gen2/HiFi.conf

https://github.com/mohsRafi/alsa-ucm-conf/blob/qcs6490_qcm6490_hifi/ucm2/Qualcomm/qcm6490/QCM6490-IDP/HiFi.conf

Thanks,
Prasad

> 
> Thanks,
> Alexey

On Sun, 1 Jun 2025 at 16:02, Prasad Kumpatla <quic_pkumpatl@quicinc.com> wrote:
>
>
>
> On 5/27/2025 7:47 PM, Alexey Klimov wrote:
> > On Tue May 27, 2025 at 12:12 PM BST, Prasad Kumpatla wrote:
> >> From: Mohammad Rafi Shaik <quic_mohs@quicinc.com>
> >>
> >> Audio support is now enabled on the qcs6490-RB3Gen2 and qcm6490-idp boards.
> >> The updates include adding the necessary audio device tree support and the required
> >> dependencies.
> >
> > Do you have topology file and mixers commands (or UCM profile) to test this?
> >
> > I already asked but I don't see any replies. How this can be tested?
>
> please use these below UCM config files
> https://github.com/mohsRafi/alsa-ucm-conf/blob/qcs6490_qcm6490_hifi/ucm2/Qualcomm/qcs6490/QCS6490-RB3Gen2/HiFi.conf
>
> https://github.com/mohsRafi/alsa-ucm-conf/blob/qcs6490_qcm6490_hifi/ucm2/Qualcomm/qcm6490/QCM6490-IDP/HiFi.conf

Is there anything there that isn't a part of the 1.2.14 release of
alsa-ucm-conf?


-- 
With best wishes
Dmitry