From: Angelo Dureghello <adureghello@baylibre.com>

Add gain calibration support by a per-channel resistor value.

Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Angelo Dureghello <adureghello@baylibre.com>
---
 .../devicetree/bindings/iio/adc/adi,ad7606.yaml    | 29 ++++++++++++++++++++++
 1 file changed, 29 insertions(+)

diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml
index 29f12d650442b8ff2eb455306ce59a0e87867ddd..6926f5f090ad6bbbe7bfd9327dc5ae17dafcd1fd 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml
@@ -204,6 +204,15 @@ patternProperties:
           considered a bipolar differential channel. Otherwise it is bipolar
           single-ended.
 
+      adi,rfilter-ohms:
+        description:
+          For ADCs that supports gain calibration, this property must be set to
+          the value of the external RFilter resistor. Proper gain error
+          correction is applied based on this value.
+        default: 0
+        minimum: 0
+        maximum: 64512
+
     required:
       - reg
       - bipolar
@@ -256,6 +265,25 @@ allOf:
       properties:
         adi,oversampling-ratio-gpios: false
 
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - adi,ad7605-4
+              - adi,ad7606-4
+              - adi,ad7606-6
+              - adi,ad7606-8
+              - adi,ad7607
+              - adi,ad7608
+              - adi,ad7609
+              - adi,ad7616
+    then:
+      patternProperties:
+        "^channel@[0-9a-f]+$":
+          properties:
+            adi,rfilter-ohms: false
+
   - if:
       properties:
         compatible:
@@ -398,6 +426,7 @@ examples:
                 reg = <8>;
                 diff-channels = <8 8>;
                 bipolar;
+                adi,rfilter-ohms = <2048>;
             };
 
         };

-- 
2.49.0