[v2] Add support for safeboot pin to UBlox GNSS driver

[PATCH v2 0/2] Add support for safeboot pin to UBlox GNSS driver

Alejandro Enrique via B4 Relay posted 2 patches 7 months ago

Diff against v1 v3
Download series mbox

There is a newer version of this series

Documentation/devicetree/bindings/gnss/u-blox,neo-6m.yaml | 20 ++++++++++++++++----
drivers/gnss/ubx.c                                        |  8 ++++++++
2 files changed, 24 insertions(+), 4 deletions(-)

Expand all Fold all

[PATCH v2 0/2] Add support for safeboot pin to UBlox GNSS driver

Posted by Alejandro Enrique via B4 Relay 7 months ago

U-Blox 8/M8 and M9 chips have a pin to start it in safeboot mode, to
be used to recover from situations where the flash content has become
corrupted and needs to be restored. If this pin is asserted at power
up or reset, the receiver starts in safeboot mode and GNSS operation
is disabled.

If this pin is wired to a GPIO in the host it should be deasserted
before powering up or resetting the GNSS.

This series adds support for handling the safeboot pin when probing
the driver.

Signed-off-by: Alejandro Enrique <alejandroe1@geotab.com>
---
Changes in v2:
- Add if/then to dt binding to disallow safeboot-gpios property for neo-6m
- Link to v1: https://lore.kernel.org/r/20250514-ubx-safeboot-v1-0-1ae771335356@geotab.com

---
Alejandro Enrique (2):
      dt-bindings: gnss: u-blox: add "safeboot-gpios" binding
      gnss: ubx: add support for the safeboot gpio

 Documentation/devicetree/bindings/gnss/u-blox,neo-6m.yaml | 20 ++++++++++++++++----
 drivers/gnss/ubx.c                                        |  8 ++++++++
 2 files changed, 24 insertions(+), 4 deletions(-)
---
base-commit: 9c32cda43eb78f78c73aee4aa344b777714e259b
change-id: 20250514-ubx-safeboot-3758f22225ec

Best regards,
-- 
Alejandro Enrique <alejandroe1@geotab.com>