1. Patchew
  2. linux
  3. View series

[PATCH] input: goodix: add poll mode for goodix touchscreen

Joseph Guo posted 1 patch 7 months ago 
drivers/input/touchscreen/goodix.c | 50 ++++++++++++++++++++++++++----
1 file changed, 44 insertions(+), 6 deletions(-)
[PATCH] input: goodix: add poll mode for goodix touchscreen
Posted by Joseph Guo 7 months ago 
goodix touchscreen only support interrupt mode by default.
Some panels like waveshare panel which is widely used on raspeberry pi
don't have interrupt pins and only work on i2c poll mode.
The waveshare panel 7inch panel use goodix gt911 touchscreen chip.

Signed-off-by: Joseph Guo <qijian.guo@nxp.com>
Reviewed-by: Haibo Chen <haibo.chen@nxp.com>
---
Change from v1 to v2
- Remove unused variable in goodix_ts_data struct
- Use polling infrastructure
---
 drivers/input/touchscreen/goodix.c | 50 ++++++++++++++++++++++++++----
 1 file changed, 44 insertions(+), 6 deletions(-)

diff --git a/drivers/input/touchscreen/goodix.c b/drivers/input/touchscreen/goodix.c
index aaf79ac50004..58e49e5cf148 100644
--- a/drivers/input/touchscreen/goodix.c
+++ b/drivers/input/touchscreen/goodix.c
@@ -47,6 +47,7 @@
 #define RESOLUTION_LOC		1
 #define MAX_CONTACTS_LOC	5
 #define TRIGGER_LOC		6
+#define GOODIX_POLL_INTERVAL_MS		17	/* 17ms = 60fps */

 /* Our special handling for GPIO accesses through ACPI is x86 specific */
 #if defined CONFIG_X86 && defined CONFIG_ACPI
@@ -497,6 +498,14 @@ static void goodix_process_events(struct goodix_ts_data *ts)
 	input_sync(ts->input_dev);
 }

+static void goodix_ts_work_i2c_poll(struct input_dev *input)
+{
+	struct goodix_ts_data *ts = input_get_drvdata(input);
+
+	goodix_process_events(ts);
+	goodix_i2c_write_u8(ts->client, GOODIX_READ_COOR_ADDR, 0);
+}
+
 /**
  * goodix_ts_irq_handler - The IRQ handler
  *
@@ -523,16 +532,33 @@ static irqreturn_t goodix_ts_irq_handler(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }

+static void goodix_enable_irq(struct goodix_ts_data *ts)
+{
+	if (ts->client->irq)
+		enable_irq(ts->client->irq);
+}
+
+static void goodix_disable_irq(struct goodix_ts_data *ts)
+{
+	if (ts->client->irq)
+		disable_irq(ts->client->irq);
+}
+
 static void goodix_free_irq(struct goodix_ts_data *ts)
 {
-	devm_free_irq(&ts->client->dev, ts->client->irq, ts);
+	if (ts->client->irq)
+		devm_free_irq(&ts->client->dev, ts->client->irq, ts);
 }

 static int goodix_request_irq(struct goodix_ts_data *ts)
 {
-	return devm_request_threaded_irq(&ts->client->dev, ts->client->irq,
-					 NULL, goodix_ts_irq_handler,
-					 ts->irq_flags, ts->client->name, ts);
+	if (ts->client->irq) {
+		return devm_request_threaded_irq(&ts->client->dev, ts->client->irq,
+						 NULL, goodix_ts_irq_handler,
+						 ts->irq_flags, ts->client->name, ts);
+		}
+	else
+		return 0;
 }

 static int goodix_check_cfg_8(struct goodix_ts_data *ts, const u8 *cfg, int len)
@@ -1229,6 +1255,18 @@ static int goodix_configure_dev(struct goodix_ts_data *ts)
 		return error;
 	}

+	input_set_drvdata(ts->input_dev, ts);
+
+	if (!ts->client->irq) {
+		error = input_setup_polling(ts->input_dev, goodix_ts_work_i2c_poll);
+		if (error) {
+			dev_err(&ts->client->dev,
+				 "could not set up polling mode, %d\n", error);
+			return error;
+		}
+		input_set_poll_interval(ts->input_dev, GOODIX_POLL_INTERVAL_MS);
+	}
+
 	error = input_register_device(ts->input_dev);
 	if (error) {
 		dev_err(&ts->client->dev,
@@ -1435,7 +1473,7 @@ static int goodix_suspend(struct device *dev)

 	/* We need gpio pins to suspend/resume */
 	if (ts->irq_pin_access_method == IRQ_PIN_ACCESS_NONE) {
-		disable_irq(client->irq);
+		goodix_disable_irq(ts);
 		return 0;
 	}

@@ -1479,7 +1517,7 @@ static int goodix_resume(struct device *dev)
 	int error;

 	if (ts->irq_pin_access_method == IRQ_PIN_ACCESS_NONE) {
-		enable_irq(client->irq);
+		goodix_enable_irq(ts);
 		return 0;
 	}

--
2.34.1
Re: [PATCH] input: goodix: add poll mode for goodix touchscreen
Posted by Hans de Goede 6 months, 4 weeks ago 
Hi Joseph,

Thank you for the new version.

For the next version, the subject here should have been "[PATCH v2] input: ...".

You can do this by doing e.g. :

git format-patch -v2 HEAD~
git send-email v2-0001-....patch

On 21-May-25 4:50 AM, Joseph Guo wrote:
> goodix touchscreen only support interrupt mode by default.
> Some panels like waveshare panel which is widely used on raspeberry pi
> don't have interrupt pins and only work on i2c poll mode.
> The waveshare panel 7inch panel use goodix gt911 touchscreen chip.
> 
> Signed-off-by: Joseph Guo <qijian.guo@nxp.com>
> Reviewed-by: Haibo Chen <haibo.chen@nxp.com>
> ---
> Change from v1 to v2
> - Remove unused variable in goodix_ts_data struct
> - Use polling infrastructure
> ---
>  drivers/input/touchscreen/goodix.c | 50 ++++++++++++++++++++++++++----
>  1 file changed, 44 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/input/touchscreen/goodix.c b/drivers/input/touchscreen/goodix.c
> index aaf79ac50004..58e49e5cf148 100644
> --- a/drivers/input/touchscreen/goodix.c
> +++ b/drivers/input/touchscreen/goodix.c
> @@ -47,6 +47,7 @@
>  #define RESOLUTION_LOC		1
>  #define MAX_CONTACTS_LOC	5
>  #define TRIGGER_LOC		6
> +#define GOODIX_POLL_INTERVAL_MS		17	/* 17ms = 60fps */
> 
>  /* Our special handling for GPIO accesses through ACPI is x86 specific */
>  #if defined CONFIG_X86 && defined CONFIG_ACPI
> @@ -497,6 +498,14 @@ static void goodix_process_events(struct goodix_ts_data *ts)
>  	input_sync(ts->input_dev);
>  }
> 
> +static void goodix_ts_work_i2c_poll(struct input_dev *input)
> +{
> +	struct goodix_ts_data *ts = input_get_drvdata(input);
> +
> +	goodix_process_events(ts);
> +	goodix_i2c_write_u8(ts->client, GOODIX_READ_COOR_ADDR, 0);
> +}
> +
>  /**
>   * goodix_ts_irq_handler - The IRQ handler
>   *
> @@ -523,16 +532,33 @@ static irqreturn_t goodix_ts_irq_handler(int irq, void *dev_id)
>  	return IRQ_HANDLED;
>  }
> 
> +static void goodix_enable_irq(struct goodix_ts_data *ts)
> +{
> +	if (ts->client->irq)
> +		enable_irq(ts->client->irq);
> +}
> +
> +static void goodix_disable_irq(struct goodix_ts_data *ts)
> +{
> +	if (ts->client->irq)
> +		disable_irq(ts->client->irq);
> +}
> +
>  static void goodix_free_irq(struct goodix_ts_data *ts)
>  {
> -	devm_free_irq(&ts->client->dev, ts->client->irq, ts);
> +	if (ts->client->irq)
> +		devm_free_irq(&ts->client->dev, ts->client->irq, ts);
>  }
> 
>  static int goodix_request_irq(struct goodix_ts_data *ts)
>  {
> -	return devm_request_threaded_irq(&ts->client->dev, ts->client->irq,
> -					 NULL, goodix_ts_irq_handler,
> -					 ts->irq_flags, ts->client->name, ts);
> +	if (ts->client->irq) {
> +		return devm_request_threaded_irq(&ts->client->dev, ts->client->irq,
> +						 NULL, goodix_ts_irq_handler,
> +						 ts->irq_flags, ts->client->name, ts);
> +		}
> +	else
> +		return 0;
>  }

The '}' here is wrongly indented, also if you use {}, which is not strictly
necessary here, please use them in both branches of the if.

Since in this function we're dealing with a multi-line statement I think it
might be better to write this as:

static int goodix_request_irq(struct goodix_ts_data *ts)
{
	if (!ts->client->irq)
		return 0;

	return devm_request_threaded_irq(&ts->client->dev, ts->client->irq,
					 NULL, goodix_ts_irq_handler,
					 ts->irq_flags, ts->client->name, ts);
}

This will also make the diff smaller.

Or you can keep what you have and drop the {}.

Regards,

Hans





>  static int goodix_check_cfg_8(struct goodix_ts_data *ts, const u8 *cfg, int len)
> @@ -1229,6 +1255,18 @@ static int goodix_configure_dev(struct goodix_ts_data *ts)
>  		return error;
>  	}
> 
> +	input_set_drvdata(ts->input_dev, ts);
> +
> +	if (!ts->client->irq) {
> +		error = input_setup_polling(ts->input_dev, goodix_ts_work_i2c_poll);
> +		if (error) {
> +			dev_err(&ts->client->dev,
> +				 "could not set up polling mode, %d\n", error);
> +			return error;
> +		}
> +		input_set_poll_interval(ts->input_dev, GOODIX_POLL_INTERVAL_MS);
> +	}
> +
>  	error = input_register_device(ts->input_dev);
>  	if (error) {
>  		dev_err(&ts->client->dev,
> @@ -1435,7 +1473,7 @@ static int goodix_suspend(struct device *dev)
> 
>  	/* We need gpio pins to suspend/resume */
>  	if (ts->irq_pin_access_method == IRQ_PIN_ACCESS_NONE) {
> -		disable_irq(client->irq);
> +		goodix_disable_irq(ts);
>  		return 0;
>  	}
> 
> @@ -1479,7 +1517,7 @@ static int goodix_resume(struct device *dev)
>  	int error;
> 
>  	if (ts->irq_pin_access_method == IRQ_PIN_ACCESS_NONE) {
> -		enable_irq(client->irq);
> +		goodix_enable_irq(ts);
>  		return 0;
>  	}
> 
> --
> 2.34.1
>

Patchew 2.1-devel-b67e4c2

© 2016 - 2025 Red Hat, Inc.