From: Vincent Knecht <vincent.knecht@mailoo.org>
Add bindings for qcom,msm8939-camss in order to support the camera
subsystem for MSM8939.
Signed-off-by: Vincent Knecht <vincent.knecht@mailoo.org>
---
.../bindings/media/qcom,msm8939-camss.yaml | 269 +++++++++++++++++++++
1 file changed, 269 insertions(+)
diff --git a/Documentation/devicetree/bindings/media/qcom,msm8939-camss.yaml b/Documentation/devicetree/bindings/media/qcom,msm8939-camss.yaml
new file mode 100644
index 0000000000000000000000000000000000000000..e300b2c84971a45cca43366817a5ed70f9bae630
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/qcom,msm8939-camss.yaml
@@ -0,0 +1,269 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/qcom,msm8939-camss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm MSM8939 Camera Subsystem (CAMSS)
+
+maintainers:
+ - Vincent Knecht <vincent.knecht@mailoo.org>
+
+description:
+ The CAMSS IP is a CSI decoder and ISP present on Qualcomm platforms
+
+properties:
+ compatible:
+ const: qcom,msm8939-camss
+
+ clocks:
+ minItems: 24
+ maxItems: 24
+
+ clock-names:
+ items:
+ - const: top_ahb
+ - const: ispif_ahb
+ - const: csiphy0_timer
+ - const: csiphy1_timer
+ - const: csi0_ahb
+ - const: csi0
+ - const: csi0_phy
+ - const: csi0_pix
+ - const: csi0_rdi
+ - const: csi1_ahb
+ - const: csi1
+ - const: csi1_phy
+ - const: csi1_pix
+ - const: csi1_rdi
+ - const: csi2_ahb
+ - const: csi2
+ - const: csi2_phy
+ - const: csi2_pix
+ - const: csi2_rdi
+ - const: ahb
+ - const: vfe0
+ - const: csi_vfe0
+ - const: vfe_ahb
+ - const: vfe_axi
+
+ interrupts:
+ minItems: 7
+ maxItems: 7
+
+ interrupt-names:
+ items:
+ - const: csiphy0
+ - const: csiphy1
+ - const: csid0
+ - const: csid1
+ - const: csid2
+ - const: ispif
+ - const: vfe0
+
+ iommus:
+ maxItems: 1
+
+ power-domains:
+ items:
+ - description: VFE GDSC - Video Front End, Global Distributed Switch Controller.
+
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+
+ description:
+ CSI input ports.
+
+ properties:
+ port@0:
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ unevaluatedProperties: false
+ description:
+ Input port for receiving CSI data.
+
+ properties:
+ endpoint:
+ $ref: video-interfaces.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ data-lanes:
+ minItems: 1
+ maxItems: 4
+
+ bus-type:
+ enum:
+ - 4 # MEDIA_BUS_TYPE_CSI2_DPHY
+
+ required:
+ - data-lanes
+
+ port@1:
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ unevaluatedProperties: false
+ description:
+ Input port for receiving CSI data.
+
+ properties:
+ endpoint:
+ $ref: video-interfaces.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ data-lanes:
+ minItems: 1
+ maxItems: 4
+
+ bus-type:
+ enum:
+ - 4 # MEDIA_BUS_TYPE_CSI2_DPHY
+
+ required:
+ - data-lanes
+
+ reg:
+ minItems: 11
+ maxItems: 11
+
+ reg-names:
+ items:
+ - const: csiphy0
+ - const: csiphy0_clk_mux
+ - const: csiphy1
+ - const: csiphy1_clk_mux
+ - const: csid0
+ - const: csid1
+ - const: csid2
+ - const: ispif
+ - const: csi_clk_mux
+ - const: vfe0
+ - const: vfe0_vbif
+
+ vdda-supply:
+ description:
+ Definition of the regulator used as analog power supply.
+
+required:
+ - clock-names
+ - clocks
+ - compatible
+ - interrupt-names
+ - interrupts
+ - iommus
+ - power-domains
+ - reg
+ - reg-names
+ - vdda-supply
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/clock/qcom,gcc-msm8939.h>
+
+ camss: camss@1b0ac00 {
+ compatible = "qcom,msm8939-camss";
+
+ clocks = <&gcc GCC_CAMSS_TOP_AHB_CLK>,
+ <&gcc GCC_CAMSS_ISPIF_AHB_CLK>,
+ <&gcc GCC_CAMSS_CSI0PHYTIMER_CLK>,
+ <&gcc GCC_CAMSS_CSI1PHYTIMER_CLK>,
+ <&gcc GCC_CAMSS_CSI0_AHB_CLK>,
+ <&gcc GCC_CAMSS_CSI0_CLK>,
+ <&gcc GCC_CAMSS_CSI0PHY_CLK>,
+ <&gcc GCC_CAMSS_CSI0PIX_CLK>,
+ <&gcc GCC_CAMSS_CSI0RDI_CLK>,
+ <&gcc GCC_CAMSS_CSI1_AHB_CLK>,
+ <&gcc GCC_CAMSS_CSI1_CLK>,
+ <&gcc GCC_CAMSS_CSI1PHY_CLK>,
+ <&gcc GCC_CAMSS_CSI1PIX_CLK>,
+ <&gcc GCC_CAMSS_CSI1RDI_CLK>,
+ <&gcc GCC_CAMSS_CSI2_AHB_CLK>,
+ <&gcc GCC_CAMSS_CSI2_CLK>,
+ <&gcc GCC_CAMSS_CSI2PHY_CLK>,
+ <&gcc GCC_CAMSS_CSI2PIX_CLK>,
+ <&gcc GCC_CAMSS_CSI2RDI_CLK>,
+ <&gcc GCC_CAMSS_AHB_CLK>,
+ <&gcc GCC_CAMSS_VFE0_CLK>,
+ <&gcc GCC_CAMSS_CSI_VFE0_CLK>,
+ <&gcc GCC_CAMSS_VFE_AHB_CLK>,
+ <&gcc GCC_CAMSS_VFE_AXI_CLK>;
+
+ clock-names = "top_ahb",
+ "ispif_ahb",
+ "csiphy0_timer",
+ "csiphy1_timer",
+ "csi0_ahb",
+ "csi0",
+ "csi0_phy",
+ "csi0_pix",
+ "csi0_rdi",
+ "csi1_ahb",
+ "csi1",
+ "csi1_phy",
+ "csi1_pix",
+ "csi1_rdi",
+ "csi2_ahb",
+ "csi2",
+ "csi2_phy",
+ "csi2_pix",
+ "csi2_rdi",
+ "ahb",
+ "vfe0",
+ "csi_vfe0",
+ "vfe_ahb",
+ "vfe_axi";
+
+ interrupts = <GIC_SPI 78 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 79 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 51 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 52 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 153 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 55 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 57 IRQ_TYPE_EDGE_RISING>;
+
+ interrupt-names = "csiphy0",
+ "csiphy1",
+ "csid0",
+ "csid1",
+ "csid2",
+ "ispif",
+ "vfe0";
+
+ iommus = <&apps_iommu 3>;
+
+ power-domains = <&gcc VFE_GDSC>;
+
+ reg = <0x01b0ac00 0x200>,
+ <0x01b00030 0x4>,
+ <0x01b0b000 0x200>,
+ <0x01b00038 0x4>,
+ <0x01b08000 0x100>,
+ <0x01b08400 0x100>,
+ <0x01b08800 0x100>,
+ <0x01b0a000 0x500>,
+ <0x01b00020 0x10>,
+ <0x01b10000 0x1000>,
+ <0x01b40000 0x200>;
+
+ reg-names = "csiphy0",
+ "csiphy0_clk_mux",
+ "csiphy1",
+ "csiphy1_clk_mux",
+ "csid0",
+ "csid1",
+ "csid2",
+ "ispif",
+ "csi_clk_mux",
+ "vfe0",
+ "vfe0_vbif";
+
+ vdda-supply = <®_2v8>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ };
--
2.49.0On Tue, May 20, 2025 at 08:39:08PM GMT, Vincent Knecht wrote:
> Add bindings for qcom,msm8939-camss in order to support the camera
> subsystem for MSM8939.
>
> Signed-off-by: Vincent Knecht <vincent.knecht@mailoo.org>
> ---
> .../bindings/media/qcom,msm8939-camss.yaml | 269 +++++++++++++++++++++
> 1 file changed, 269 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/media/qcom,msm8939-camss.yaml b/Documentation/devicetree/bindings/media/qcom,msm8939-camss.yaml
> new file mode 100644
> index 0000000000000000000000000000000000000000..e300b2c84971a45cca43366817a5ed70f9bae630
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/qcom,msm8939-camss.yaml
> @@ -0,0 +1,269 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/media/qcom,msm8939-camss.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Qualcomm MSM8939 Camera Subsystem (CAMSS)
> +
> +maintainers:
> + - Vincent Knecht <vincent.knecht@mailoo.org>
> +
> +description:
> + The CAMSS IP is a CSI decoder and ISP present on Qualcomm platforms
> +
> +properties:
> + compatible:
> + const: qcom,msm8939-camss
> +
No reg? No reg-names?
> + clocks:
> + minItems: 24
> + maxItems: 24
> +
> + clock-names:
> + items:
> + - const: top_ahb
> + - const: ispif_ahb
> + - const: csiphy0_timer
> + - const: csiphy1_timer
> + - const: csi0_ahb
> + - const: csi0
> + - const: csi0_phy
> + - const: csi0_pix
> + - const: csi0_rdi
> + - const: csi1_ahb
> + - const: csi1
> + - const: csi1_phy
> + - const: csi1_pix
> + - const: csi1_rdi
> + - const: csi2_ahb
> + - const: csi2
> + - const: csi2_phy
> + - const: csi2_pix
> + - const: csi2_rdi
> + - const: ahb
> + - const: vfe0
> + - const: csi_vfe0
> + - const: vfe_ahb
> + - const: vfe_axi
> +
> + interrupts:
> + minItems: 7
> + maxItems: 7
> +
> + interrupt-names:
> + items:
> + - const: csiphy0
> + - const: csiphy1
> + - const: csid0
> + - const: csid1
> + - const: csid2
> + - const: ispif
> + - const: vfe0
> +
> + iommus:
> + maxItems: 1
> +
> + power-domains:
> + items:
> + - description: VFE GDSC - Video Front End, Global Distributed Switch Controller.
> +
> + ports:
> + $ref: /schemas/graph.yaml#/properties/ports
> +
> + description:
> + CSI input ports.
> +
> + properties:
> + port@0:
> + $ref: /schemas/graph.yaml#/$defs/port-base
> + unevaluatedProperties: false
> + description:
> + Input port for receiving CSI data.
> +
> + properties:
> + endpoint:
> + $ref: video-interfaces.yaml#
> + unevaluatedProperties: false
> +
> + properties:
> + data-lanes:
> + minItems: 1
> + maxItems: 4
> +
> + bus-type:
> + enum:
> + - 4 # MEDIA_BUS_TYPE_CSI2_DPHY
> +
> + required:
> + - data-lanes
> +
> + port@1:
> + $ref: /schemas/graph.yaml#/$defs/port-base
> + unevaluatedProperties: false
> + description:
> + Input port for receiving CSI data.
> +
> + properties:
> + endpoint:
> + $ref: video-interfaces.yaml#
> + unevaluatedProperties: false
> +
> + properties:
> + data-lanes:
> + minItems: 1
> + maxItems: 4
> +
> + bus-type:
> + enum:
> + - 4 # MEDIA_BUS_TYPE_CSI2_DPHY
> +
> + required:
> + - data-lanes
> +
> + reg:
> + minItems: 11
> + maxItems: 11
OK, here they are. reg should follow compatible.
> +
> + reg-names:
> + items:
> + - const: csiphy0
> + - const: csiphy0_clk_mux
> + - const: csiphy1
> + - const: csiphy1_clk_mux
> + - const: csid0
> + - const: csid1
> + - const: csid2
> + - const: ispif
> + - const: csi_clk_mux
> + - const: vfe0
> + - const: vfe0_vbif
> +
> + vdda-supply:
> + description:
> + Definition of the regulator used as analog power supply.
> +
> +required:
> + - clock-names
> + - clocks
> + - compatible
Totally messed order. Keep the same order as in properties. See also DTS
coding style.
> + - interrupt-names
> + - interrupts
> + - iommus
> + - power-domains
> + - reg
> + - reg-names
> + - vdda-supply
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/interrupt-controller/arm-gic.h>
> + #include <dt-bindings/clock/qcom,gcc-msm8939.h>
> +
> + camss: camss@1b0ac00 {
Drop unused label
> + compatible = "qcom,msm8939-camss";
> +
Follow DTS coding style.
...
> + vdda-supply = <®_2v8>;
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
Incomplete example.
> + };
> +
Drop redundant blank line.
Best regards,
Krzysztof
On 20/05/2025 19:39, Vincent Knecht via B4 Relay wrote:
> From: Vincent Knecht <vincent.knecht@mailoo.org>
>
> Add bindings for qcom,msm8939-camss in order to support the camera
> subsystem for MSM8939.
>
> Signed-off-by: Vincent Knecht <vincent.knecht@mailoo.org>
> ---
> .../bindings/media/qcom,msm8939-camss.yaml | 269 +++++++++++++++++++++
> 1 file changed, 269 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/media/qcom,msm8939-camss.yaml b/Documentation/devicetree/bindings/media/qcom,msm8939-camss.yaml
> new file mode 100644
> index 0000000000000000000000000000000000000000..e300b2c84971a45cca43366817a5ed70f9bae630
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/qcom,msm8939-camss.yaml
> @@ -0,0 +1,269 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/media/qcom,msm8939-camss.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Qualcomm MSM8939 Camera Subsystem (CAMSS)
> +
> +maintainers:
> + - Vincent Knecht <vincent.knecht@mailoo.org>
> +
> +description:
> + The CAMSS IP is a CSI decoder and ISP present on Qualcomm platforms
> +
> +properties:
> + compatible:
> + const: qcom,msm8939-camss
> +
> + clocks:
> + minItems: 24
> + maxItems: 24
> +
> + clock-names:
> + items:
> + - const: top_ahb
> + - const: ispif_ahb
> + - const: csiphy0_timer
> + - const: csiphy1_timer
> + - const: csi0_ahb
> + - const: csi0
> + - const: csi0_phy
> + - const: csi0_pix
> + - const: csi0_rdi
> + - const: csi1_ahb
> + - const: csi1
> + - const: csi1_phy
> + - const: csi1_pix
> + - const: csi1_rdi
> + - const: csi2_ahb
> + - const: csi2
> + - const: csi2_phy
> + - const: csi2_pix
> + - const: csi2_rdi
> + - const: ahb
> + - const: vfe0
> + - const: csi_vfe0
> + - const: vfe_ahb
> + - const: vfe_axi
> +
> + interrupts:
> + minItems: 7
> + maxItems: 7
> +
> + interrupt-names:
> + items:
> + - const: csiphy0
> + - const: csiphy1
> + - const: csid0
> + - const: csid1
> + - const: csid2
> + - const: ispif
> + - const: vfe0
> +
> + iommus:
> + maxItems: 1
> +
> + power-domains:
> + items:
> + - description: VFE GDSC - Video Front End, Global Distributed Switch Controller.
> +
> + ports:
> + $ref: /schemas/graph.yaml#/properties/ports
> +
> + description:
> + CSI input ports.
> +
> + properties:
> + port@0:
> + $ref: /schemas/graph.yaml#/$defs/port-base
> + unevaluatedProperties: false
> + description:
> + Input port for receiving CSI data.
> +
> + properties:
> + endpoint:
> + $ref: video-interfaces.yaml#
> + unevaluatedProperties: false
> +
> + properties:
> + data-lanes:
> + minItems: 1
> + maxItems: 4
> +
> + bus-type:
> + enum:
> + - 4 # MEDIA_BUS_TYPE_CSI2_DPHY
> +
> + required:
> + - data-lanes
> +
> + port@1:
> + $ref: /schemas/graph.yaml#/$defs/port-base
> + unevaluatedProperties: false
> + description:
> + Input port for receiving CSI data.
> +
> + properties:
> + endpoint:
> + $ref: video-interfaces.yaml#
> + unevaluatedProperties: false
> +
> + properties:
> + data-lanes:
> + minItems: 1
> + maxItems: 4
> +
> + bus-type:
> + enum:
> + - 4 # MEDIA_BUS_TYPE_CSI2_DPHY
> +
> + required:
> + - data-lanes
> +
> + reg:
> + minItems: 11
> + maxItems: 11
> +
> + reg-names:
> + items:
> + - const: csiphy0
> + - const: csiphy0_clk_mux
> + - const: csiphy1
> + - const: csiphy1_clk_mux
> + - const: csid0
> + - const: csid1
> + - const: csid2
> + - const: ispif
> + - const: csi_clk_mux
> + - const: vfe0
> + - const: vfe0_vbif
> +
> + vdda-supply:
> + description:
> + Definition of the regulator used as analog power supply.
> +
> +required:
> + - clock-names
> + - clocks
> + - compatible
> + - interrupt-names
> + - interrupts
> + - iommus
> + - power-domains
> + - reg
> + - reg-names
> + - vdda-supply
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/interrupt-controller/arm-gic.h>
> + #include <dt-bindings/clock/qcom,gcc-msm8939.h>
> +
> + camss: camss@1b0ac00 {
> + compatible = "qcom,msm8939-camss";
> +
> + clocks = <&gcc GCC_CAMSS_TOP_AHB_CLK>,
> + <&gcc GCC_CAMSS_ISPIF_AHB_CLK>,
> + <&gcc GCC_CAMSS_CSI0PHYTIMER_CLK>,
> + <&gcc GCC_CAMSS_CSI1PHYTIMER_CLK>,
> + <&gcc GCC_CAMSS_CSI0_AHB_CLK>,
> + <&gcc GCC_CAMSS_CSI0_CLK>,
> + <&gcc GCC_CAMSS_CSI0PHY_CLK>,
> + <&gcc GCC_CAMSS_CSI0PIX_CLK>,
> + <&gcc GCC_CAMSS_CSI0RDI_CLK>,
> + <&gcc GCC_CAMSS_CSI1_AHB_CLK>,
> + <&gcc GCC_CAMSS_CSI1_CLK>,
> + <&gcc GCC_CAMSS_CSI1PHY_CLK>,
> + <&gcc GCC_CAMSS_CSI1PIX_CLK>,
> + <&gcc GCC_CAMSS_CSI1RDI_CLK>,
> + <&gcc GCC_CAMSS_CSI2_AHB_CLK>,
> + <&gcc GCC_CAMSS_CSI2_CLK>,
> + <&gcc GCC_CAMSS_CSI2PHY_CLK>,
> + <&gcc GCC_CAMSS_CSI2PIX_CLK>,
> + <&gcc GCC_CAMSS_CSI2RDI_CLK>,
> + <&gcc GCC_CAMSS_AHB_CLK>,
> + <&gcc GCC_CAMSS_VFE0_CLK>,
> + <&gcc GCC_CAMSS_CSI_VFE0_CLK>,
> + <&gcc GCC_CAMSS_VFE_AHB_CLK>,
> + <&gcc GCC_CAMSS_VFE_AXI_CLK>;
> +
> + clock-names = "top_ahb",
> + "ispif_ahb",
> + "csiphy0_timer",
> + "csiphy1_timer",
> + "csi0_ahb",
> + "csi0",
> + "csi0_phy",
> + "csi0_pix",
> + "csi0_rdi",
> + "csi1_ahb",
> + "csi1",
> + "csi1_phy",
> + "csi1_pix",
> + "csi1_rdi",
> + "csi2_ahb",
> + "csi2",
> + "csi2_phy",
> + "csi2_pix",
> + "csi2_rdi",
> + "ahb",
> + "vfe0",
> + "csi_vfe0",
> + "vfe_ahb",
> + "vfe_axi";
The ordering should be alphanum sorted.
> + interrupts = <GIC_SPI 78 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 79 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 51 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 52 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 153 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 55 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 57 IRQ_TYPE_EDGE_RISING>;
> +
> + interrupt-names = "csiphy0",
> + "csiphy1",
> + "csid0",
> + "csid1",
> + "csid2",
> + "ispif",
> + "vfe0";
> +
> + iommus = <&apps_iommu 3>;
> +
> + power-domains = <&gcc VFE_GDSC>;
> +
> + reg = <0x01b0ac00 0x200>,
> + <0x01b00030 0x4>,
> + <0x01b0b000 0x200>,
> + <0x01b00038 0x4>,
> + <0x01b08000 0x100>,
> + <0x01b08400 0x100>,
> + <0x01b08800 0x100>,
> + <0x01b0a000 0x500>,
> + <0x01b00020 0x10>,
> + <0x01b10000 0x1000>,
> + <0x01b40000 0x200>;
> +
> + reg-names = "csiphy0",
> + "csiphy0_clk_mux",
> + "csiphy1",
> + "csiphy1_clk_mux",
> + "csid0",
> + "csid1",
> + "csid2",
> + "ispif",
> + "csi_clk_mux",
> + "vfe0",
> + "vfe0_vbif";
> +
> + vdda-supply = <®_2v8>;
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + };
> +
> + };
>
© 2016 - 2025 Red Hat, Inc.