Dear All,

OV5645 image sensor is connected to the RZ SMARC Carrier II via the CAM_CSI1
CSI-2 connector. Specifically, the following hardware pipeline has been used:

CAM_CSI1 (RZ SMARC Carrier II) -> RZ SMARC Pi Camera Adaptor -> OV5645

This patch series adds support for the OV5645 image sensor on the Renesas
RZ SMARC Carrier II.

Thanks & Regards,
Tommaso

Tommaso Merciai (4):
  arm64: dts: renesas: r9a09g047: Add CRU, CSI2 nodes
  arm64: dts: renesas: r9a09g047e57-smarc: Add I2C0 pincontrol
  arm64: dts: renesas: renesas-smarc2: Enable I2C0 node
  arm64: dts: renesas: r9a09g047e57-smarc: Enable CRU, CSI support

 arch/arm64/boot/dts/renesas/Makefile          |  3 +
 arch/arm64/boot/dts/renesas/r9a09g047.dtsi    | 69 +++++++++++++++++++
 .../r9a09g047e57-smarc-cru-csi-ov5645.dtso    | 21 ++++++
 .../boot/dts/renesas/r9a09g047e57-smarc.dts   | 10 +++
 .../boot/dts/renesas/renesas-smarc2.dtsi      |  6 ++
 5 files changed, 109 insertions(+)
 create mode 100644 arch/arm64/boot/dts/renesas/r9a09g047e57-smarc-cru-csi-ov5645.dtso

-- 
2.43.0