From: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Since the sibling data is filled after the priv->clks[] array entry is
populated, the first clock that is probed and has a sibling will
temporarily behave as its own sibling until its actual sibling is
populated. To avoid any issues, postpone updating priv->clks[] until after
the sibling is populated.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
---
Changes in v2:
- postpone the update of priv->clks[id] as suggested in review process
- updated the patch title and description to reflect the new approach
drivers/clk/renesas/rzg2l-cpg.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/clk/renesas/rzg2l-cpg.c b/drivers/clk/renesas/rzg2l-cpg.c
index a8628f64a03b..c87ad5a972b7 100644
--- a/drivers/clk/renesas/rzg2l-cpg.c
+++ b/drivers/clk/renesas/rzg2l-cpg.c
@@ -1389,10 +1389,6 @@ rzg2l_cpg_register_mod_clk(const struct rzg2l_mod_clk *mod,
goto fail;
}
- clk = clock->hw.clk;
- dev_dbg(dev, "Module clock %pC at %lu Hz\n", clk, clk_get_rate(clk));
- priv->clks[id] = clk;
-
if (mod->is_coupled) {
struct mstp_clock *sibling;
@@ -1404,6 +1400,10 @@ rzg2l_cpg_register_mod_clk(const struct rzg2l_mod_clk *mod,
}
}
+ clk = clock->hw.clk;
+ dev_dbg(dev, "Module clock %pC at %lu Hz\n", clk, clk_get_rate(clk));
+ priv->clks[id] = clk;
+
return;
fail:
--
2.43.0