On 14/05/2025 11:25, Dario Binacchi wrote:
> From: Wolfgang Birkner <wolfgang.birkner@bshg.com>
>
> Buck4 is called Buck6 in the BD71847 datasheet. This buck supports
> 2.6...3.3V. Set the minimum allowed value.
Same comment as for 6/9. Please provide better rationale than the PMIC's
limits.
>
> Signed-off-by: Wolfgang Birkner <wolfgang.birkner@bshg.com>
> Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
> ---
>
> arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2-common.dtsi | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2-common.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2-common.dtsi
> index 81fa0a8767e2..04112a83b1d3 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2-common.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2-common.dtsi
> @@ -144,7 +144,7 @@ buck3_reg: BUCK3 {
> buck4_reg: BUCK4 {
> /* PMIC_BUCK6 - VDD_3V3 */
> regulator-name = "buck4";
> - regulator-min-microvolt = <3000000>;
> + regulator-min-microvolt = <2600000>;
> regulator-max-microvolt = <3300000>;
> regulator-boot-on;
> regulator-always-on;
Yours,
-- Matti