Add support for new pci device id 0x1641 to register
Renoir device with PCIe.

Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com>
---
Changes since v2:
- use the correct device name Renoir instead of Crater

 drivers/net/ethernet/amd/xgbe/xgbe-pci.c | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

diff --git a/drivers/net/ethernet/amd/xgbe/xgbe-pci.c b/drivers/net/ethernet/amd/xgbe/xgbe-pci.c
index 718534d30651..097ec5e4f261 100644
--- a/drivers/net/ethernet/amd/xgbe/xgbe-pci.c
+++ b/drivers/net/ethernet/amd/xgbe/xgbe-pci.c
@@ -391,6 +391,22 @@ static int __maybe_unused xgbe_pci_resume(struct device *dev)
 	return ret;
 }
 
+static struct xgbe_version_data xgbe_v3 = {
+	.init_function_ptrs_phy_impl	= xgbe_init_function_ptrs_phy_v2,
+	.xpcs_access			= XGBE_XPCS_ACCESS_V3,
+	.mmc_64bit			= 1,
+	.tx_max_fifo_size		= 65536,
+	.rx_max_fifo_size		= 65536,
+	.tx_tstamp_workaround		= 1,
+	.ecc_support			= 1,
+	.i2c_support			= 1,
+	.irq_reissue_support		= 1,
+	.tx_desc_prefetch		= 5,
+	.rx_desc_prefetch		= 5,
+	.an_cdr_workaround		= 0,
+	.enable_rrc			= 0,
+};
+
 static struct xgbe_version_data xgbe_v2a = {
 	.init_function_ptrs_phy_impl	= xgbe_init_function_ptrs_phy_v2,
 	.xpcs_access			= XGBE_XPCS_ACCESS_V2,
@@ -428,6 +444,8 @@ static const struct pci_device_id xgbe_pci_table[] = {
 	  .driver_data = (kernel_ulong_t)&xgbe_v2a },
 	{ PCI_VDEVICE(AMD, 0x1459),
 	  .driver_data = (kernel_ulong_t)&xgbe_v2b },
+	{ PCI_VDEVICE(AMD, 0x1641),
+	  .driver_data = (kernel_ulong_t)&xgbe_v3 },
 	/* Last entry must be zero */
 	{ 0, }
 };
-- 
2.34.1

On Fri, May 09, 2025 at 09:23:25PM +0530, Raju Rangoju wrote:
> Add support for new pci device id 0x1641 to register
> Renoir device with PCIe.
> 
> Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com>
> ---
> Changes since v2:
> - use the correct device name Renoir instead of Crater

Reviewed-by: Simon Horman <horms@kernel.org>