The RTL8211E ethernet PHY driver has recently gained support for
controlling PHY LEDs via /sys/class/leds. The Bananapi M1 has three
LEDs connected to the RTL8211E PHY. Add the corresponding nodes to
the device tree.

Signed-off-by: Michael Klein <michael@fossekall.de>
---

v2: Refine commit message
v3: Move patch changelog below commit message separator

 .../boot/dts/allwinner/sun7i-a20-bananapi.dts | 27 +++++++++++++++++++
 1 file changed, 27 insertions(+)

diff --git a/arch/arm/boot/dts/allwinner/sun7i-a20-bananapi.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-bananapi.dts
index 46ecf9db2324..d8b362c9661a 100644
--- a/arch/arm/boot/dts/allwinner/sun7i-a20-bananapi.dts
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-bananapi.dts
@@ -48,6 +48,7 @@
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/leds/common.h>
 
 / {
 	model = "LeMaker Banana Pi";
@@ -169,6 +170,32 @@ &ir0 {
 &gmac_mdio {
 	phy1: ethernet-phy@1 {
 		reg = <1>;
+
+		leds {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			led@0 {
+				reg = <0>;
+				color = <LED_COLOR_ID_GREEN>;
+				function = LED_FUNCTION_LAN;
+				linux,default-trigger = "netdev";
+			};
+
+			led@1 {
+				reg = <1>;
+				color = <LED_COLOR_ID_AMBER>;
+				function = LED_FUNCTION_LAN;
+				linux,default-trigger = "netdev";
+			};
+
+			led@2 {
+				reg = <2>;
+				color = <LED_COLOR_ID_BLUE>;
+				function = LED_FUNCTION_LAN;
+				linux,default-trigger = "netdev";
+			};
+		};
 	};
 };
 
-- 
2.39.5

On Thu, 08 May 2025 19:36:56 +0200, Michael Klein wrote:
> The RTL8211E ethernet PHY driver has recently gained support for
> controlling PHY LEDs via /sys/class/leds. The Bananapi M1 has three
> LEDs connected to the RTL8211E PHY. Add the corresponding nodes to
> the device tree.
> 
> 

Applied to sunxi/dt-for-6.16 in sunxi/linux.git, thanks!

[1/1] ARM: dts: bananapi: add support for PHY LEDs
      https://git.kernel.org/sunxi/linux/c/d010f85f1acf

Best regards,
-- 
Chen-Yu Tsai <wens@csie.org>