From: Angelo Dureghello <adureghello@baylibre.com>

Add new IIO calibconv_delay documentation.

The ad7606 implements a phase calibation feature, in nanoseconds.
Being this a time delay, using the conv_delay suffix.

Signed-off-by: Angelo Dureghello <adureghello@baylibre.com>
---
 Documentation/ABI/testing/sysfs-bus-iio | 24 ++++++++++++++++++++++++
 1 file changed, 24 insertions(+)

diff --git a/Documentation/ABI/testing/sysfs-bus-iio b/Documentation/ABI/testing/sysfs-bus-iio
index 190bfcc1e836b69622692d7c056c0092e00f1a9b..9ced916895fbef146d46d17b5fdc932784b4c1df 100644
--- a/Documentation/ABI/testing/sysfs-bus-iio
+++ b/Documentation/ABI/testing/sysfs-bus-iio
@@ -559,6 +559,30 @@ Description:
 		- a small discrete set of values like "0 2 4 6 8"
 		- a range specified as "[min step max]"
 
+What:		/sys/bus/iio/devices/iio:deviceX/in_voltageY_convdelay
+KernelVersion:  6.16
+Contact:        linux-iio@vger.kernel.org
+Description:
+		Delay of start of conversion in seconds from common reference
+		point shared by all channels. Can be writable when used to
+		compensate for delay variation introduced by external filters
+		feeding a simultaneous sampling ADC.
+
+		I.e., for the ad7606 ADC series, this value is intended as a
+		configurable time delay in seconds, to correct delay introduced
+		by an optional external filtering circuit.
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_voltageY_convdelay_available
+KernelVersion:	6.16
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Available values of convdelay. Maybe expressed as:
+
+		- a range specified as "[min step max]"
+
+		If shared across all channels, <type>_calibconv_delay_available
+		is used.
+
 What:		/sys/bus/iio/devices/iio:deviceX/in_accel_x_calibscale
 What:		/sys/bus/iio/devices/iio:deviceX/in_accel_y_calibscale
 What:		/sys/bus/iio/devices/iio:deviceX/in_accel_z_calibscale

-- 
2.49.0

On Thu, 08 May 2025 12:06:05 +0200
Angelo Dureghello <adureghello@baylibre.com> wrote:

> From: Angelo Dureghello <adureghello@baylibre.com>
> 
> Add new IIO calibconv_delay documentation.
> 
> The ad7606 implements a phase calibation feature, in nanoseconds.
> Being this a time delay, using the conv_delay suffix.
> 
> Signed-off-by: Angelo Dureghello <adureghello@baylibre.com>
> ---
>  Documentation/ABI/testing/sysfs-bus-iio | 24 ++++++++++++++++++++++++
>  1 file changed, 24 insertions(+)
> 
> diff --git a/Documentation/ABI/testing/sysfs-bus-iio b/Documentation/ABI/testing/sysfs-bus-iio
> index 190bfcc1e836b69622692d7c056c0092e00f1a9b..9ced916895fbef146d46d17b5fdc932784b4c1df 100644
> --- a/Documentation/ABI/testing/sysfs-bus-iio
> +++ b/Documentation/ABI/testing/sysfs-bus-iio
> @@ -559,6 +559,30 @@ Description:
>  		- a small discrete set of values like "0 2 4 6 8"
>  		- a range specified as "[min step max]"
>  
> +What:		/sys/bus/iio/devices/iio:deviceX/in_voltageY_convdelay
> +KernelVersion:  6.16
> +Contact:        linux-iio@vger.kernel.org
> +Description:
> +		Delay of start of conversion in seconds from common reference
> +		point shared by all channels. Can be writable when used to
> +		compensate for delay variation introduced by external filters
> +		feeding a simultaneous sampling ADC.
> +
> +		I.e., for the ad7606 ADC series, this value is intended as a
> +		configurable time delay in seconds, to correct delay introduced

Drop the 'in seconds' here as that is repeating the generic bit above. The rest is
fine subject to formatting Andy noted.

> +		by an optional external filtering circuit.
> +
> +What:		/sys/bus/iio/devices/iio:deviceX/in_voltageY_convdelay_available
> +KernelVersion:	6.16
> +Contact:	linux-iio@vger.kernel.org
> +Description:
> +		Available values of convdelay. Maybe expressed as:
> +
> +		- a range specified as "[min step max]"
> +
> +		If shared across all channels, <type>_calibconv_delay_available
> +		is used.
> +
>  What:		/sys/bus/iio/devices/iio:deviceX/in_accel_x_calibscale
>  What:		/sys/bus/iio/devices/iio:deviceX/in_accel_y_calibscale
>  What:		/sys/bus/iio/devices/iio:deviceX/in_accel_z_calibscale
>

On Thu, May 08, 2025 at 12:06:05PM +0200, Angelo Dureghello wrote:
> From: Angelo Dureghello <adureghello@baylibre.com>
> 
> Add new IIO calibconv_delay documentation.
> 
> The ad7606 implements a phase calibation feature, in nanoseconds.
> Being this a time delay, using the conv_delay suffix.

...

> +What:		/sys/bus/iio/devices/iio:deviceX/in_voltageY_convdelay
> +KernelVersion:  6.16

Here is the space being used...

> +Contact:        linux-iio@vger.kernel.org
> +Description:
> +		Delay of start of conversion in seconds from common reference
> +		point shared by all channels. Can be writable when used to
> +		compensate for delay variation introduced by external filters
> +		feeding a simultaneous sampling ADC.
> +
> +		I.e., for the ad7606 ADC series, this value is intended as a
> +		configurable time delay in seconds, to correct delay introduced
> +		by an optional external filtering circuit.
> +
> +What:		/sys/bus/iio/devices/iio:deviceX/in_voltageY_convdelay_available
> +KernelVersion:	6.16

...and here is TAB. Please, make the text consistent. If the original one is
inconsistent, fix it first.

> +Contact:	linux-iio@vger.kernel.org
> +Description:
> +		Available values of convdelay. Maybe expressed as:
> +
> +		- a range specified as "[min step max]"
> +
> +		If shared across all channels, <type>_calibconv_delay_available
> +		is used.

-- 
With Best Regards,
Andy Shevchenko