Hi everybody,
this is a friendly ping :-)
Any feedback on this version of the series?
(except for that one approved patch ;-) )
Thanks & regards;
rl
On Wed, May 07, 2025 at 09:51:29AM +0200, Richard Leitner wrote:
> This series adds a new v4l2 controls named "strobe duration" with id
> V4L2_CID_FLASH_DURATION. This control enables setting a desired
> flash/strobe length/duration in µs.
>
> As a first user of this new control add basic flash/strobe support for
> ov9282 sensors using their "hardware strobe output". The duration
> calculation is only interpolated from various measurements, as no
> documentation was found.
>
> Further flash/strobe-related controls as well as a migration to v4l2-cci
> helpers for ov9282 will likely be implemented in future series.
>
> All register addresses/values are based on the OV9281 datasheet v1.53
> (january 2019). This series was tested using an ov9281 VisionComponents
> camera module.
>
> Signed-off-by: Richard Leitner <richard.leitner@linux.dev>
> ---
> Changes in v4:
> - Fix FLASH_DURATION implementation in v4l2-flash-led-class.c by adding a
> missing brace and enum entry (thanks Sakari)
> - Fix format of multiline comment in ov9282.c (thanks Sakari)
> - Add missing NULL check in ov9282.c (thanks Sakari)
> - Adapt nr_of_controls_hint for v4l2 handler in ov9282.c (thanks Sakari)
> - Add patch for implementing try_ctrl for strobe_duration (thanks Sakari)
> - Link to v3: https://lore.kernel.org/r/20250429-ov9282-flash-strobe-v3-0-2105ce179952@linux.dev
>
> Changes in v3:
> - create separate patch for leds driver changes (thanks Lee)
> - Link to v2: https://lore.kernel.org/r/20250314-ov9282-flash-strobe-v2-0-14d7a281342d@linux.dev
>
> Changes in v2:
> - remove not needed controls in struct ov9282 (thanks Dave)
> - Fix commit message of 3/3 regarding framerate get/set (thanks Dave)
> - Add V4L2_CID_FLASH_STROBE_SOURCE impementation to ov9282
> - Add new V4L2_CID_FLASH_DURATION control (as suggested by Laurent)
> - Use FLASH_DURATION instead of FLASH_TIMEOUT for ov9282
> - Link to v1: https://lore.kernel.org/r/20250303-ov9282-flash-strobe-v1-0-0fd57a1564ba@linux.dev
>
> ---
> Richard Leitner (10):
> media: v4l: ctrls: add a control for flash/strobe duration
> leds: flash: add support for flash/stobe duration
> media: v4l2-flash: add support for flash/strobe duration
> media: v4l2-flash: fix flash_timeout comment
> Documentation: uAPI: media: add V4L2_CID_FLASH_DURATION
> media: i2c: ov9282: add output enable register definitions
> media: i2c: ov9282: add led_mode v4l2 control
> media: i2c: ov9282: add strobe_duration v4l2 control
> media: i2c: ov9282: add strobe_source v4l2 control
> media: i2c: ov9282: implement try_ctrl for strobe_duration
>
> .../userspace-api/media/v4l/ext-ctrls-flash.rst | 5 +
> drivers/leds/led-class-flash.c | 15 +++
> drivers/media/i2c/ov9282.c | 148 ++++++++++++++++++++-
> drivers/media/v4l2-core/v4l2-ctrls-defs.c | 1 +
> drivers/media/v4l2-core/v4l2-flash-led-class.c | 25 ++++
> include/linux/led-class-flash.h | 18 ++-
> include/uapi/linux/v4l2-controls.h | 1 +
> 7 files changed, 208 insertions(+), 5 deletions(-)
> ---
> base-commit: 92a09c47464d040866cf2b4cd052bc60555185fb
> change-id: 20250303-ov9282-flash-strobe-ac6bd00c9de6
> prerequisite-change-id: 20250225-b4-ov9282-gain-ef1cdaba5bfd:v1
> prerequisite-patch-id: 86f2582378ff7095ab65ce4bb25a143eb639e840
> prerequisite-patch-id: b06eb6ec697aaf0b3155b4b2370f171d0d304ae2
> prerequisite-patch-id: b123047d71bfb9b93f743bbdd6893d5a98495801
>
> Best regards,
> --
> Richard Leitner <richard.leitner@linux.dev>
>
>