Enable all remoteproc nodes on the qcs615-ride board and point to the
appropriate firmware files to allow proper functioning of the remote
processors.

Signed-off-by: Lijuan Gao <quic_lijuang@quicinc.com>
---
 arch/arm64/boot/dts/qcom/qcs615-ride.dts | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/qcs615-ride.dts b/arch/arm64/boot/dts/qcom/qcs615-ride.dts
index 2b5aa3c66867..a6652e4817d1 100644
--- a/arch/arm64/boot/dts/qcom/qcs615-ride.dts
+++ b/arch/arm64/boot/dts/qcom/qcs615-ride.dts
@@ -240,6 +240,18 @@ &qupv3_id_0 {
 	status = "okay";
 };
 
+&remoteproc_adsp {
+	firmware-name = "qcom/qcs615/adsp.mbn";
+
+	status = "okay";
+};
+
+&remoteproc_cdsp {
+	firmware-name = "qcom/qcs615/cdsp.mbn";
+
+	status = "okay";
+};
+
 &rpmhcc {
 	clocks = <&xo_board_clk>;
 };

-- 
2.46.0

On 5/7/25 12:26 PM, Lijuan Gao wrote:
> Enable all remoteproc nodes on the qcs615-ride board and point to the
> appropriate firmware files to allow proper functioning of the remote
> processors.
> 
> Signed-off-by: Lijuan Gao <quic_lijuang@quicinc.com>
> ---


Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>

Konrad