On 5/6/25 7:43 AM, George Moussalem via B4 Relay wrote:
> From: George Moussalem <george.moussalem@outlook.com>
>
> The XO and its source clock must be always-on and is enabled in the GCC
> during probe. As such, remove the bindings for them.
>
> Signed-off-by: George Moussalem <george.moussalem@outlook.com>
> ---
> include/dt-bindings/clock/qcom,gcc-ipq5018.h | 2 --
> 1 file changed, 2 deletions(-)
>
> diff --git a/include/dt-bindings/clock/qcom,gcc-ipq5018.h b/include/dt-bindings/clock/qcom,gcc-ipq5018.h
> index f3de2fdfeea11f4b8832b75a05e424ca347b3634..d4de5eaffee7b4cb81e0ff2dcbf9e6669c3da8f8 100644
> --- a/include/dt-bindings/clock/qcom,gcc-ipq5018.h
> +++ b/include/dt-bindings/clock/qcom,gcc-ipq5018.h
> @@ -140,8 +140,6 @@
> #define GCC_WCSS_DBG_IFC_NTS_BDG_CLK 131
> #define GCC_WCSS_DBG_IFC_NTS_CLK 132
> #define GCC_WCSS_ECAHB_CLK 133
> -#define GCC_XO_CLK 134
> -#define GCC_XO_CLK_SRC 135
> #define GMAC0_RX_CLK_SRC 136
> #define GMAC0_TX_CLK_SRC 137
> #define GMAC1_RX_CLK_SRC 138
Let's skip this patch - when we add dt-bindings, we promise these values
will be an ABI, leaving them in there, even if unused, will help
introducing spurious entries