Convert the Marvell SEI interrupt controller binding to schema format.
It's a straight-forward conversion of the typical interrupt controller.

Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
---
 .../marvell,ap806-sei.yaml                    | 58 +++++++++++++++++++
 .../interrupt-controller/marvell,sei.txt      | 36 ------------
 2 files changed, 58 insertions(+), 36 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/interrupt-controller/marvell,ap806-sei.yaml
 delete mode 100644 Documentation/devicetree/bindings/interrupt-controller/marvell,sei.txt

diff --git a/Documentation/devicetree/bindings/interrupt-controller/marvell,ap806-sei.yaml b/Documentation/devicetree/bindings/interrupt-controller/marvell,ap806-sei.yaml
new file mode 100644
index 000000000000..e812f9a86307
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/marvell,ap806-sei.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/marvell,ap806-sei.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell SEI (System Error Interrupt) Controller
+
+maintainers:
+  - Miquel Raynal <miquel.raynal@bootlin.com>
+
+description: >
+  Marvell SEI (System Error Interrupt) controller is an interrupt aggregator. It
+  receives interrupts from several sources and aggregates them to a single
+  interrupt line (an SPI) on the parent interrupt controller.
+
+  This interrupt controller can handle up to 64 SEIs, a set comes from the AP
+  and is wired while a second set comes from the CPs by the mean of MSIs.
+
+properties:
+  compatible:
+    const: marvell,ap806-sei
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  '#interrupt-cells':
+    const: 1
+
+  interrupt-controller: true
+
+  msi-controller: true
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - '#interrupt-cells'
+  - interrupt-controller
+  - msi-controller
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    interrupt-controller@3f0200 {
+        compatible = "marvell,ap806-sei";
+        reg = <0x3f0200 0x40>;
+        interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+        #interrupt-cells = <1>;
+        interrupt-controller;
+        msi-controller;
+    };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/marvell,sei.txt b/Documentation/devicetree/bindings/interrupt-controller/marvell,sei.txt
deleted file mode 100644
index 0beafed502f5..000000000000
--- a/Documentation/devicetree/bindings/interrupt-controller/marvell,sei.txt
+++ /dev/null
@@ -1,36 +0,0 @@
-Marvell SEI (System Error Interrupt) Controller
------------------------------------------------
-
-Marvell SEI (System Error Interrupt) controller is an interrupt
-aggregator. It receives interrupts from several sources and aggregates
-them to a single interrupt line (an SPI) on the parent interrupt
-controller.
-
-This interrupt controller can handle up to 64 SEIs, a set comes from the
-AP and is wired while a second set comes from the CPs by the mean of
-MSIs.
-
-Required properties:
-
-- compatible: should be one of:
-              * "marvell,ap806-sei"
-- reg: SEI registers location and length.
-- interrupts: identifies the parent IRQ that will be triggered.
-- #interrupt-cells: number of cells to define an SEI wired interrupt
-                    coming from the AP, should be 1. The cell is the IRQ
-                    number.
-- interrupt-controller: identifies the node as an interrupt controller
-                        for AP interrupts.
-- msi-controller: identifies the node as an MSI controller for the CPs
-                  interrupts.
-
-Example:
-
-        sei: interrupt-controller@3f0200 {
-                compatible = "marvell,ap806-sei";
-                reg = <0x3f0200 0x40>;
-                interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
-                #interrupt-cells = <1>;
-                interrupt-controller;
-                msi-controller;
-        };
-- 
2.47.2

On 05/05/2025 at 09:47:48 -05, "Rob Herring (Arm)" <robh@kernel.org> wrote:

> Convert the Marvell SEI interrupt controller binding to schema format.
> It's a straight-forward conversion of the typical interrupt controller.
>
> Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
> ---

Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>

Thanks,
Miquèl