Remove setting bits_per_word = 8 from the adis driver. This is the
default value for SPI transfers, so it is not necessary to explicitly
set it.

Signed-off-by: David Lechner <dlechner@baylibre.com>
---
 drivers/iio/imu/adis.c        | 9 ---------
 drivers/iio/imu/adis_buffer.c | 3 ---
 2 files changed, 12 deletions(-)

diff --git a/drivers/iio/imu/adis.c b/drivers/iio/imu/adis.c
index 0ea072a4c966994ff8b1a6c7572bfe979ada43a1..d160147cce0ba7586ac7df69af58816b413bbd46 100644
--- a/drivers/iio/imu/adis.c
+++ b/drivers/iio/imu/adis.c
@@ -39,34 +39,29 @@ int __adis_write_reg(struct adis *adis, unsigned int reg, unsigned int value,
 	struct spi_transfer xfers[] = {
 		{
 			.tx_buf = adis->tx,
-			.bits_per_word = 8,
 			.len = 2,
 			.cs_change = 1,
 			.delay.value = adis->data->write_delay,
 			.delay.unit = SPI_DELAY_UNIT_USECS,
 		}, {
 			.tx_buf = adis->tx + 2,
-			.bits_per_word = 8,
 			.len = 2,
 			.cs_change = 1,
 			.delay.value = adis->data->write_delay,
 			.delay.unit = SPI_DELAY_UNIT_USECS,
 		}, {
 			.tx_buf = adis->tx + 4,
-			.bits_per_word = 8,
 			.len = 2,
 			.cs_change = 1,
 			.delay.value = adis->data->write_delay,
 			.delay.unit = SPI_DELAY_UNIT_USECS,
 		}, {
 			.tx_buf = adis->tx + 6,
-			.bits_per_word = 8,
 			.len = 2,
 			.delay.value = adis->data->write_delay,
 			.delay.unit = SPI_DELAY_UNIT_USECS,
 		}, {
 			.tx_buf = adis->tx + 8,
-			.bits_per_word = 8,
 			.len = 2,
 			.delay.value = adis->data->write_delay,
 			.delay.unit = SPI_DELAY_UNIT_USECS,
@@ -133,14 +128,12 @@ int __adis_read_reg(struct adis *adis, unsigned int reg, unsigned int *val,
 	struct spi_transfer xfers[] = {
 		{
 			.tx_buf = adis->tx,
-			.bits_per_word = 8,
 			.len = 2,
 			.cs_change = 1,
 			.delay.value = adis->data->write_delay,
 			.delay.unit = SPI_DELAY_UNIT_USECS,
 		}, {
 			.tx_buf = adis->tx + 2,
-			.bits_per_word = 8,
 			.len = 2,
 			.cs_change = 1,
 			.delay.value = adis->data->read_delay,
@@ -148,14 +141,12 @@ int __adis_read_reg(struct adis *adis, unsigned int reg, unsigned int *val,
 		}, {
 			.tx_buf = adis->tx + 4,
 			.rx_buf = adis->rx,
-			.bits_per_word = 8,
 			.len = 2,
 			.cs_change = 1,
 			.delay.value = adis->data->read_delay,
 			.delay.unit = SPI_DELAY_UNIT_USECS,
 		}, {
 			.rx_buf = adis->rx + 2,
-			.bits_per_word = 8,
 			.len = 2,
 			.delay.value = adis->data->read_delay,
 			.delay.unit = SPI_DELAY_UNIT_USECS,
diff --git a/drivers/iio/imu/adis_buffer.c b/drivers/iio/imu/adis_buffer.c
index fdfc0538734c5e781be9fd5b7183f3dfb51830b9..cd3db2388164b558b82c5da67423bd2ca142858b 100644
--- a/drivers/iio/imu/adis_buffer.c
+++ b/drivers/iio/imu/adis_buffer.c
@@ -49,12 +49,10 @@ static int adis_update_scan_mode_burst(struct iio_dev *indio_dev,
 	tx[1] = 0;
 
 	adis->xfer[0].tx_buf = tx;
-	adis->xfer[0].bits_per_word = 8;
 	adis->xfer[0].len = 2;
 	if (adis->data->burst_max_speed_hz)
 		adis->xfer[0].speed_hz = adis->data->burst_max_speed_hz;
 	adis->xfer[1].rx_buf = adis->buffer;
-	adis->xfer[1].bits_per_word = 8;
 	adis->xfer[1].len = burst_length;
 	if (adis->data->burst_max_speed_hz)
 		adis->xfer[1].speed_hz = adis->data->burst_max_speed_hz;
@@ -100,7 +98,6 @@ int adis_update_scan_mode(struct iio_dev *indio_dev,
 	spi_message_init(&adis->msg);
 
 	for (j = 0; j <= scan_count; j++) {
-		adis->xfer[j].bits_per_word = 8;
 		if (j != scan_count)
 			adis->xfer[j].cs_change = 1;
 		adis->xfer[j].len = 2;

-- 
2.43.0