arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi | 75 ++++++++++++++++++++++++++ 1 file changed, 75 insertions(+)
From: Aaron Kling <webgeek1234@gmail.com>
This is based on 6f78a94, which enabled added the fan and thermal zones
for the Jetson Nano Devkit. The fan and thermal characteristics of the
two devkits are similar, so using the same configuration.
Signed-off-by: Aaron Kling <webgeek1234@gmail.com>
---
Changes in v2:
- Add fan regulator
- Add interrupt for tachometer
- Reverse cooling map to account for inverse polarity
- Rename cooling map nodes to map# as tht is all the schema allows
- Link to v1: https://lore.kernel.org/r/20250420-tx1-therm-v1-1-58516c7fc429@gmail.com
---
arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi | 75 ++++++++++++++++++++++++++
1 file changed, 75 insertions(+)
diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi
index 83ed6ac2a8d8f403fb588edce83dc401065c162f..584461f3a6196c4327e958b424dfd2139cd43965 100644
--- a/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi
@@ -1623,6 +1623,18 @@ key-volume-up {
};
};
+ fan: pwm-fan {
+ compatible = "pwm-fan";
+ pwms = <&pwm 3 45334>;
+ fan-supply = <&vdd_fan>;
+ interrupt-parent = <&gpio>;
+ interrupts = <TEGRA_GPIO(K, 7) IRQ_TYPE_EDGE_RISING>;
+
+ /* cooling level (0, 1, 2, 3) - pwm inverted */
+ cooling-levels = <255 128 64 0>;
+ #cooling-cells = <2>;
+ };
+
vdd_sys_mux: regulator-vdd-sys-mux {
compatible = "regulator-fixed";
regulator-name = "VDD_SYS_MUX";
@@ -1778,4 +1790,67 @@ vdd_usb_vbus_otg: regulator-vdd-usb-vbus-otg {
enable-active-high;
vin-supply = <&vdd_5v0_sys>;
};
+
+ vdd_fan: regulator-vdd-fan {
+ compatible = "regulator-fixed";
+ regulator-name = "VDD_FAN";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&exp1 4 GPIO_ACTIVE_LOW>;
+ vin-supply = <&vdd_5v0_sys>;
+
+ regulator-enable-ramp-delay = <284>;
+ };
+
+ thermal-zones {
+ cpu-thermal {
+ trips {
+ cpu_trip_critical: critical {
+ temperature = <96500>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+
+ cpu_trip_hot: hot {
+ temperature = <70000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+
+ cpu_trip_active: active {
+ temperature = <50000>;
+ hysteresis = <2000>;
+ type = "active";
+ };
+
+ cpu_trip_passive: passive {
+ temperature = <30000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ cooling-device = <&fan 3 3>;
+ trip = <&cpu_trip_critical>;
+ };
+
+ map1 {
+ cooling-device = <&fan 2 2>;
+ trip = <&cpu_trip_hot>;
+ };
+
+ map2 {
+ cooling-device = <&fan 1 1>;
+ trip = <&cpu_trip_active>;
+ };
+
+ map3 {
+ cooling-device = <&fan 0 0>;
+ trip = <&cpu_trip_passive>;
+ };
+ };
+ };
+ };
};
---
base-commit: 9c32cda43eb78f78c73aee4aa344b777714e259b
change-id: 20250420-tx1-therm-9fb3c30fa43f
Best regards,
--
Aaron Kling <webgeek1234@gmail.com>From: Thierry Reding <treding@nvidia.com>
On Thu, 01 May 2025 17:32:23 -0500, Aaron Kling wrote:
> This is based on 6f78a94, which enabled added the fan and thermal zones
> for the Jetson Nano Devkit. The fan and thermal characteristics of the
> two devkits are similar, so using the same configuration.
>
>
Applied, thanks!
[1/1] arm64: tegra: Enable PWM fan on the Jetson TX1 Devkit
commit: 01f11ffdfd909e870c3863af60875e8de328790a
Best regards,
--
Thierry Reding <treding@nvidia.com>
From: Thierry Reding <treding@nvidia.com>
On Thu, 01 May 2025 17:32:23 -0500, Aaron Kling wrote:
> This is based on 6f78a94, which enabled added the fan and thermal zones
> for the Jetson Nano Devkit. The fan and thermal characteristics of the
> two devkits are similar, so using the same configuration.
>
>
Applied, thanks!
[1/1] arm64: tegra: Enable PWM fan on the Jetson TX1 Devkit
commit: 36ab61d8b80d0dca5a62b43c7e4ea12d5a5067d4
Best regards,
--
Thierry Reding <treding@nvidia.com>
© 2016 - 2025 Red Hat, Inc.