arch/arm64/boot/dts/qcom/sa8775p-ride.dtsi | 35 - arch/arm64/boot/dts/qcom/sa8775p.dtsi | 750 +++++++++++++++++++++ 2 files changed, 750 insertions(+), 35 deletions(-)
Default pinctrl configurations for all QUP (Qualcomm Universal Peripheral)
Serial Engines (SEs) are missing in the SoC device tree. These
configurations are required by client teams when enabling any SEs as I2C,
SPI, or Serial protocols.
Add default pin configurations for Serial Engines (SEs) for all supported
protocols, including I2C, SPI, and UART, to the sa8775p device tree. This
change facilitates slave device driver clients to enable usecase with
minimal modifications.
Remove duplicate pin configurations from target-specific file as same pin
configuration is included in the SoC device tree.
Signed-off-by: Viken Dadhaniya <quic_vdadhani@quicinc.com>
---
v2 -> v3:
- Remove duplicate pin configurations from target-specific file.
v2 Link: https://lore.kernel.org/lkml/20250324151047.842648-1-quic_vdadhani@quicinc.com/
v1 -> v2:
- Drop drive-strength and bias property from soc dtsi.
- Update commit log.
v1 Link: https://lore.kernel.org/lkml/20250225154136.3052757-1-quic_vdadhani@quicinc.com/
---
---
---
arch/arm64/boot/dts/qcom/sa8775p-ride.dtsi | 35 -
arch/arm64/boot/dts/qcom/sa8775p.dtsi | 750 +++++++++++++++++++++
2 files changed, 750 insertions(+), 35 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sa8775p-ride.dtsi b/arch/arm64/boot/dts/qcom/sa8775p-ride.dtsi
index 967913169539..3b4243ef37e7 100644
--- a/arch/arm64/boot/dts/qcom/sa8775p-ride.dtsi
+++ b/arch/arm64/boot/dts/qcom/sa8775p-ride.dtsi
@@ -508,15 +508,11 @@ queue3 {
&i2c11 {
clock-frequency = <400000>;
- pinctrl-0 = <&qup_i2c11_default>;
- pinctrl-names = "default";
status = "okay";
};
&i2c18 {
clock-frequency = <400000>;
- pinctrl-0 = <&qup_i2c18_default>;
- pinctrl-names = "default";
status = "okay";
};
@@ -678,8 +674,6 @@ &sleep_clk {
};
&spi16 {
- pinctrl-0 = <&qup_spi16_default>;
- pinctrl-names = "default";
status = "okay";
};
@@ -712,80 +706,53 @@ ethernet0_mdio: ethernet0-mdio-pins {
};
};
- qup_uart10_default: qup-uart10-state {
- pins = "gpio46", "gpio47";
- function = "qup1_se3";
- };
-
qup_spi16_default: qup-spi16-state {
- pins = "gpio86", "gpio87", "gpio88", "gpio89";
- function = "qup2_se2";
drive-strength = <6>;
bias-disable;
};
qup_i2c11_default: qup-i2c11-state {
- pins = "gpio48", "gpio49";
- function = "qup1_se4";
drive-strength = <2>;
bias-pull-up;
};
qup_i2c18_default: qup-i2c18-state {
- pins = "gpio95", "gpio96";
- function = "qup2_se4";
drive-strength = <2>;
bias-pull-up;
};
qup_uart12_default: qup-uart12-state {
qup_uart12_cts: qup-uart12-cts-pins {
- pins = "gpio52";
- function = "qup1_se5";
bias-disable;
};
qup_uart12_rts: qup-uart12-rts-pins {
- pins = "gpio53";
- function = "qup1_se5";
bias-pull-down;
};
qup_uart12_tx: qup-uart12-tx-pins {
- pins = "gpio54";
- function = "qup1_se5";
bias-pull-up;
};
qup_uart12_rx: qup-uart12-rx-pins {
- pins = "gpio55";
- function = "qup1_se5";
bias-pull-down;
};
};
qup_uart17_default: qup-uart17-state {
qup_uart17_cts: qup-uart17-cts-pins {
- pins = "gpio91";
- function = "qup2_se3";
bias-disable;
};
qup_uart17_rts: qup0-uart17-rts-pins {
- pins = "gpio92";
- function = "qup2_se3";
bias-pull-down;
};
qup_uart17_tx: qup0-uart17-tx-pins {
- pins = "gpio93";
- function = "qup2_se3";
bias-pull-up;
};
qup_uart17_rx: qup0-uart17-rx-pins {
- pins = "gpio94";
- function = "qup2_se3";
bias-pull-down;
};
};
@@ -917,8 +884,6 @@ &remoteproc_gpdsp1 {
&uart10 {
compatible = "qcom,geni-debug-uart";
- pinctrl-0 = <&qup_uart10_default>;
- pinctrl-names = "default";
status = "okay";
};
diff --git a/arch/arm64/boot/dts/qcom/sa8775p.dtsi b/arch/arm64/boot/dts/qcom/sa8775p.dtsi
index 5bd0c03476b1..3261c243940c 100644
--- a/arch/arm64/boot/dts/qcom/sa8775p.dtsi
+++ b/arch/arm64/boot/dts/qcom/sa8775p.dtsi
@@ -913,6 +913,8 @@ i2c14: i2c@880000 {
interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
clock-names = "se";
+ pinctrl-0 = <&qup_i2c14_default>;
+ pinctrl-names = "default";
interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
&clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
@@ -938,6 +940,8 @@ spi14: spi@880000 {
interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
clock-names = "se";
+ pinctrl-0 = <&qup_spi14_default>;
+ pinctrl-names = "default";
interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
&clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
@@ -961,6 +965,8 @@ uart14: serial@880000 {
interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
clock-names = "se";
+ pinctrl-0 = <&qup_uart14_default>;
+ pinctrl-names = "default";
interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
&clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
@@ -978,6 +984,8 @@ i2c15: i2c@884000 {
interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
clock-names = "se";
+ pinctrl-0 = <&qup_i2c15_default>;
+ pinctrl-names = "default";
interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
&clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
@@ -1003,6 +1011,8 @@ spi15: spi@884000 {
interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
clock-names = "se";
+ pinctrl-0 = <&qup_spi15_default>;
+ pinctrl-names = "default";
interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
&clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
@@ -1026,6 +1036,8 @@ uart15: serial@884000 {
interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
clock-names = "se";
+ pinctrl-0 = <&qup_uart15_default>;
+ pinctrl-names = "default";
interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
&clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
@@ -1043,6 +1055,8 @@ i2c16: i2c@888000 {
interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
clock-names = "se";
+ pinctrl-0 = <&qup_i2c16_default>;
+ pinctrl-names = "default";
interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
&clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
@@ -1066,6 +1080,8 @@ spi16: spi@888000 {
interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
clock-names = "se";
+ pinctrl-0 = <&qup_spi16_default>;
+ pinctrl-names = "default";
interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
&clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
@@ -1091,6 +1107,8 @@ uart16: serial@888000 {
interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
clock-names = "se";
+ pinctrl-0 = <&qup_uart16_default>;
+ pinctrl-names = "default";
interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
&clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
@@ -1108,6 +1126,8 @@ i2c17: i2c@88c000 {
interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
clock-names = "se";
+ pinctrl-0 = <&qup_i2c17_default>;
+ pinctrl-names = "default";
interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
&clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
@@ -1133,6 +1153,8 @@ spi17: spi@88c000 {
interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
clock-names = "se";
+ pinctrl-0 = <&qup_spi17_default>;
+ pinctrl-names = "default";
interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
&clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
@@ -1156,6 +1178,8 @@ uart17: serial@88c000 {
interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
clock-names = "se";
+ pinctrl-0 = <&qup_uart17_default>;
+ pinctrl-names = "default";
interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
&clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
@@ -1171,6 +1195,8 @@ i2c18: i2c@890000 {
interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
clock-names = "se";
+ pinctrl-0 = <&qup_i2c18_default>;
+ pinctrl-names = "default";
interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
&clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
@@ -1198,6 +1224,8 @@ spi18: spi@890000 {
interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
clock-names = "se";
+ pinctrl-0 = <&qup_spi18_default>;
+ pinctrl-names = "default";
interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
&clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
@@ -1221,6 +1249,8 @@ uart18: serial@890000 {
interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
clock-names = "se";
+ pinctrl-0 = <&qup_uart18_default>;
+ pinctrl-names = "default";
interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
&clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
@@ -1238,6 +1268,8 @@ i2c19: i2c@894000 {
interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
clock-names = "se";
+ pinctrl-0 = <&qup_i2c19_default>;
+ pinctrl-names = "default";
interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
&clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
@@ -1263,6 +1295,8 @@ spi19: spi@894000 {
interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
clock-names = "se";
+ pinctrl-0 = <&qup_spi19_default>;
+ pinctrl-names = "default";
interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
&clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
@@ -1286,6 +1320,8 @@ uart19: serial@894000 {
interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
clock-names = "se";
+ pinctrl-0 = <&qup_uart19_default>;
+ pinctrl-names = "default";
interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
&clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
@@ -1303,6 +1339,8 @@ i2c20: i2c@898000 {
interrupts = <GIC_SPI 834 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_QUPV3_WRAP2_S6_CLK>;
clock-names = "se";
+ pinctrl-0 = <&qup_i2c20_default>;
+ pinctrl-names = "default";
interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
&clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
@@ -1328,6 +1366,8 @@ spi20: spi@898000 {
interrupts = <GIC_SPI 834 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_QUPV3_WRAP2_S6_CLK>;
clock-names = "se";
+ pinctrl-0 = <&qup_spi20_default>;
+ pinctrl-names = "default";
interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
&clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
@@ -1351,6 +1391,8 @@ uart20: serial@898000 {
interrupts = <GIC_SPI 834 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_QUPV3_WRAP2_S6_CLK>;
clock-names = "se";
+ pinctrl-0 = <&qup_uart20_default>;
+ pinctrl-names = "default";
interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
&clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
@@ -1404,6 +1446,8 @@ i2c0: i2c@980000 {
interrupts = <GIC_SPI 550 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
clock-names = "se";
+ pinctrl-0 = <&qup_i2c0_default>;
+ pinctrl-names = "default";
interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
&clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
@@ -1429,6 +1473,8 @@ spi0: spi@980000 {
interrupts = <GIC_SPI 550 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
clock-names = "se";
+ pinctrl-0 = <&qup_spi0_default>;
+ pinctrl-names = "default";
interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
&clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
@@ -1452,6 +1498,8 @@ uart0: serial@980000 {
interrupts = <GIC_SPI 550 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
clock-names = "se";
+ pinctrl-0 = <&qup_uart0_default>;
+ pinctrl-names = "default";
interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
&clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
@@ -1469,6 +1517,8 @@ i2c1: i2c@984000 {
interrupts = <GIC_SPI 551 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
clock-names = "se";
+ pinctrl-0 = <&qup_i2c1_default>;
+ pinctrl-names = "default";
interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
&clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
@@ -1494,6 +1544,8 @@ spi1: spi@984000 {
interrupts = <GIC_SPI 551 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
clock-names = "se";
+ pinctrl-0 = <&qup_spi1_default>;
+ pinctrl-names = "default";
interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
&clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
@@ -1517,6 +1569,8 @@ uart1: serial@984000 {
interrupts = <GIC_SPI 551 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
clock-names = "se";
+ pinctrl-0 = <&qup_uart1_default>;
+ pinctrl-names = "default";
interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
&clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
@@ -1534,6 +1588,8 @@ i2c2: i2c@988000 {
interrupts = <GIC_SPI 529 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
clock-names = "se";
+ pinctrl-0 = <&qup_i2c2_default>;
+ pinctrl-names = "default";
interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
&clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
@@ -1559,6 +1615,8 @@ spi2: spi@988000 {
interrupts = <GIC_SPI 529 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
clock-names = "se";
+ pinctrl-0 = <&qup_spi2_default>;
+ pinctrl-names = "default";
interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
&clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
@@ -1582,6 +1640,8 @@ uart2: serial@988000 {
interrupts = <GIC_SPI 529 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
clock-names = "se";
+ pinctrl-0 = <&qup_uart2_default>;
+ pinctrl-names = "default";
interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
&clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
@@ -1599,6 +1659,8 @@ i2c3: i2c@98c000 {
interrupts = <GIC_SPI 530 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
clock-names = "se";
+ pinctrl-0 = <&qup_i2c3_default>;
+ pinctrl-names = "default";
interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
&clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
@@ -1624,6 +1686,8 @@ spi3: spi@98c000 {
interrupts = <GIC_SPI 530 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
clock-names = "se";
+ pinctrl-0 = <&qup_spi3_default>;
+ pinctrl-names = "default";
interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
&clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
@@ -1647,6 +1711,8 @@ uart3: serial@98c000 {
interrupts = <GIC_SPI 530 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
clock-names = "se";
+ pinctrl-0 = <&qup_uart3_default>;
+ pinctrl-names = "default";
interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
&clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
@@ -1664,6 +1730,8 @@ i2c4: i2c@990000 {
interrupts = <GIC_SPI 531 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
clock-names = "se";
+ pinctrl-0 = <&qup_i2c4_default>;
+ pinctrl-names = "default";
interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
&clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
@@ -1689,6 +1757,8 @@ spi4: spi@990000 {
interrupts = <GIC_SPI 531 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
clock-names = "se";
+ pinctrl-0 = <&qup_spi4_default>;
+ pinctrl-names = "default";
interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
&clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
@@ -1712,6 +1782,8 @@ uart4: serial@990000 {
interrupts = <GIC_SPI 531 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
clock-names = "se";
+ pinctrl-0 = <&qup_uart4_default>;
+ pinctrl-names = "default";
interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
&clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
@@ -1729,6 +1801,8 @@ i2c5: i2c@994000 {
interrupts = <GIC_SPI 535 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
clock-names = "se";
+ pinctrl-0 = <&qup_i2c5_default>;
+ pinctrl-names = "default";
interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
&clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
@@ -1754,6 +1828,8 @@ spi5: spi@994000 {
interrupts = <GIC_SPI 535 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
clock-names = "se";
+ pinctrl-0 = <&qup_spi5_default>;
+ pinctrl-names = "default";
interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
&clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
@@ -1777,6 +1853,8 @@ uart5: serial@994000 {
interrupts = <GIC_SPI 535 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
clock-names = "se";
+ pinctrl-0 = <&qup_uart5_default>;
+ pinctrl-names = "default";
interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
&clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
@@ -1829,6 +1907,8 @@ i2c7: i2c@a80000 {
interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
clock-names = "se";
+ pinctrl-0 = <&qup_i2c7_default>;
+ pinctrl-names = "default";
interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
&clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
@@ -1854,6 +1934,8 @@ spi7: spi@a80000 {
interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
clock-names = "se";
+ pinctrl-0 = <&qup_spi7_default>;
+ pinctrl-names = "default";
interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
&clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
@@ -1877,6 +1959,8 @@ uart7: serial@a80000 {
interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+ pinctrl-0 = <&qup_uart7_default>;
+ pinctrl-names = "default";
interconnect-names = "qup-core", "qup-config";
interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
&clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
@@ -1895,6 +1979,8 @@ i2c8: i2c@a84000 {
interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
clock-names = "se";
+ pinctrl-0 = <&qup_i2c8_default>;
+ pinctrl-names = "default";
interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
&clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
@@ -1920,6 +2006,8 @@ spi8: spi@a84000 {
interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
clock-names = "se";
+ pinctrl-0 = <&qup_spi8_default>;
+ pinctrl-names = "default";
interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
&clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
@@ -1943,6 +2031,8 @@ uart8: serial@a84000 {
interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+ pinctrl-0 = <&qup_uart8_default>;
+ pinctrl-names = "default";
interconnect-names = "qup-core", "qup-config";
interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
&clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
@@ -1961,6 +2051,8 @@ i2c9: i2c@a88000 {
interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
clock-names = "se";
+ pinctrl-0 = <&qup_i2c9_default>;
+ pinctrl-names = "default";
interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
&clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
@@ -1986,6 +2078,8 @@ spi9: spi@a88000 {
interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
clock-names = "se";
+ pinctrl-0 = <&qup_spi9_default>;
+ pinctrl-names = "default";
interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
&clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
@@ -2009,6 +2103,8 @@ uart9: serial@a88000 {
interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
clock-names = "se";
+ pinctrl-0 = <&qup_uart9_default>;
+ pinctrl-names = "default";
interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
&clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
@@ -2026,6 +2122,8 @@ i2c10: i2c@a8c000 {
interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
clock-names = "se";
+ pinctrl-0 = <&qup_i2c10_default>;
+ pinctrl-names = "default";
interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
&clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
@@ -2051,6 +2149,8 @@ spi10: spi@a8c000 {
interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
clock-names = "se";
+ pinctrl-0 = <&qup_spi10_default>;
+ pinctrl-names = "default";
interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
&clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
@@ -2074,6 +2174,8 @@ uart10: serial@a8c000 {
interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+ pinctrl-0 = <&qup_uart10_default>;
+ pinctrl-names = "default";
interconnect-names = "qup-core", "qup-config";
interconnects = <&clk_virt MASTER_QUP_CORE_1 0
&clk_virt SLAVE_QUP_CORE_1 0>,
@@ -2092,6 +2194,8 @@ i2c11: i2c@a90000 {
interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
clock-names = "se";
+ pinctrl-0 = <&qup_i2c11_default>;
+ pinctrl-names = "default";
interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
&clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
@@ -2117,6 +2221,8 @@ spi11: spi@a90000 {
interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
clock-names = "se";
+ pinctrl-0 = <&qup_spi11_default>;
+ pinctrl-names = "default";
interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
&clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
@@ -2140,6 +2246,8 @@ uart11: serial@a90000 {
interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+ pinctrl-0 = <&qup_uart11_default>;
+ pinctrl-names = "default";
interconnect-names = "qup-core", "qup-config";
interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
&clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
@@ -2158,6 +2266,8 @@ i2c12: i2c@a94000 {
interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
clock-names = "se";
+ pinctrl-0 = <&qup_i2c12_default>;
+ pinctrl-names = "default";
interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
&clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
@@ -2183,6 +2293,8 @@ spi12: spi@a94000 {
interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
clock-names = "se";
+ pinctrl-0 = <&qup_spi12_default>;
+ pinctrl-names = "default";
interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
&clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
@@ -2206,6 +2318,8 @@ uart12: serial@a94000 {
interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
clock-names = "se";
+ pinctrl-0 = <&qup_uart12_default>;
+ pinctrl-names = "default";
interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
&clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
@@ -2223,6 +2337,8 @@ i2c13: i2c@a98000 {
interrupts = <GIC_SPI 836 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
clock-names = "se";
+ pinctrl-0 = <&qup_i2c13_default>;
+ pinctrl-names = "default";
interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
&clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
@@ -2276,6 +2392,8 @@ i2c21: i2c@b80000 {
interrupts = <GIC_SPI 831 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_QUPV3_WRAP3_S0_CLK>;
clock-names = "se";
+ pinctrl-0 = <&qup_i2c21_default>;
+ pinctrl-names = "default";
interconnects = <&clk_virt MASTER_QUP_CORE_3 QCOM_ICC_TAG_ALWAYS
&clk_virt SLAVE_QUP_CORE_3 QCOM_ICC_TAG_ALWAYS>,
<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
@@ -2301,6 +2419,8 @@ spi21: spi@b80000 {
interrupts = <GIC_SPI 831 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_QUPV3_WRAP3_S0_CLK>;
clock-names = "se";
+ pinctrl-0 = <&qup_spi21_default>;
+ pinctrl-names = "default";
interconnects = <&clk_virt MASTER_QUP_CORE_3 QCOM_ICC_TAG_ALWAYS
&clk_virt SLAVE_QUP_CORE_3 QCOM_ICC_TAG_ALWAYS>,
<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
@@ -2325,6 +2445,8 @@ uart21: serial@b80000 {
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP3_S0_CLK>;
interconnect-names = "qup-core", "qup-config";
+ pinctrl-0 = <&qup_uart21_default>;
+ pinctrl-names = "default";
interconnects = <&clk_virt MASTER_QUP_CORE_3 QCOM_ICC_TAG_ALWAYS
&clk_virt SLAVE_QUP_CORE_3 QCOM_ICC_TAG_ALWAYS>,
<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
@@ -4412,6 +4534,634 @@ tlmm: pinctrl@f000000 {
#interrupt-cells = <2>;
gpio-ranges = <&tlmm 0 0 149>;
wakeup-parent = <&pdc>;
+
+ qup_i2c0_default: qup-i2c0-state {
+ pins = "gpio20", "gpio21";
+ function = "qup0_se0";
+ };
+
+ qup_i2c1_default: qup-i2c1-state {
+ pins = "gpio24", "gpio25";
+ function = "qup0_se1";
+ };
+
+ qup_i2c2_default: qup-i2c2-state {
+ pins = "gpio36", "gpio37";
+ function = "qup0_se2";
+ };
+
+ qup_i2c3_default: qup-i2c3-state {
+ pins = "gpio28", "gpio29";
+ function = "qup0_se3";
+ };
+
+ qup_i2c4_default: qup-i2c4-state {
+ pins = "gpio32", "gpio33";
+ function = "qup0_se4";
+ };
+
+ qup_i2c5_default: qup-i2c5-state {
+ pins = "gpio36", "gpio37";
+ function = "qup0_se5";
+ };
+
+ qup_i2c7_default: qup-i2c7-state {
+ pins = "gpio40", "gpio41";
+ function = "qup1_se0";
+ };
+
+ qup_i2c8_default: qup-i2c8-state {
+ pins = "gpio42", "gpio43";
+ function = "qup1_se1";
+ };
+
+ qup_i2c9_default: qup-i2c9-state {
+ pins = "gpio46", "gpio47";
+ function = "qup1_se2";
+ };
+
+ qup_i2c10_default: qup-i2c10-state {
+ pins = "gpio44", "gpio45";
+ function = "qup1_se3";
+ };
+
+ qup_i2c11_default: qup-i2c11-state {
+ pins = "gpio48", "gpio49";
+ function = "qup1_se4";
+ };
+
+ qup_i2c12_default: qup-i2c12-state {
+ pins = "gpio52", "gpio53";
+ function = "qup1_se5";
+ };
+
+ qup_i2c13_default: qup-i2c13-state {
+ pins = "gpio56", "gpio57";
+ function = "qup1_se6";
+ };
+
+ qup_i2c14_default: qup-i2c14-state {
+ pins = "gpio80", "gpio81";
+ function = "qup2_se0";
+ };
+
+ qup_i2c15_default: qup-i2c15-state {
+ pins = "gpio84", "gpio85";
+ function = "qup2_se1";
+ };
+
+ qup_i2c16_default: qup-i2c16-state {
+ pins = "gpio86", "gpio87";
+ function = "qup2_se2";
+ };
+
+ qup_i2c17_default: qup-i2c17-state {
+ pins = "gpio91", "gpio92";
+ function = "qup2_se3";
+ };
+
+ qup_i2c18_default: qup-i2c18-state {
+ pins = "gpio95", "gpio96";
+ function = "qup2_se4";
+ };
+
+ qup_i2c19_default: qup-i2c19-state {
+ pins = "gpio99", "gpio100";
+ function = "qup2_se5";
+ };
+
+ qup_i2c20_default: qup-i2c20-state {
+ pins = "gpio97", "gpio98";
+ function = "qup2_se6";
+ };
+
+ qup_i2c21_default: qup-i2c21-state {
+ pins = "gpio13", "gpio14";
+ function = "qup3_se0";
+ };
+
+ qup_spi0_default: qup-spi0-state {
+ pins = "gpio20", "gpio21", "gpio22", "gpio23";
+ function = "qup0_se0";
+ };
+
+ qup_spi1_default: qup-spi1-state {
+ pins = "gpio24", "gpio25", "gpio26", "gpio27";
+ function = "qup0_se1";
+ };
+
+ qup_spi2_default: qup-spi2-state {
+ pins = "gpio36", "gpio37", "gpio38", "gpio39";
+ function = "qup0_se2";
+ };
+
+ qup_spi3_default: qup-spi3-state {
+ pins = "gpio28", "gpio29", "gpio30", "gpio31";
+ function = "qup0_se3";
+ };
+
+ qup_spi4_default: qup-spi4-state {
+ pins = "gpio32", "gpio33", "gpio34", "gpio35";
+ function = "qup0_se4";
+ };
+
+ qup_spi5_default: qup-spi5-state {
+ pins = "gpio36", "gpio37", "gpio38", "gpio39";
+ function = "qup0_se5";
+ };
+
+ qup_spi7_default: qup-spi7-state {
+ pins = "gpio40", "gpio41", "gpio42", "gpio43";
+ function = "qup1_se0";
+ };
+
+ qup_spi8_default: qup-spi8-state {
+ pins = "gpio42", "gpio43", "gpio40", "gpio41";
+ function = "qup1_se1";
+ };
+
+ qup_spi9_default: qup-spi9-state {
+ pins = "gpio46", "gpio47", "gpio44", "gpio45";
+ function = "qup1_se2";
+ };
+
+ qup_spi10_default: qup-spi10-state {
+ pins = "gpio44", "gpio45", "gpio46", "gpio47";
+ function = "qup1_se3";
+ };
+
+ qup_spi11_default: qup-spi11-state {
+ pins = "gpio48", "gpio49", "gpio50", "gpio51";
+ function = "qup1_se4";
+ };
+
+ qup_spi12_default: qup-spi12-state {
+ pins = "gpio52", "gpio53", "gpio54", "gpio55";
+ function = "qup1_se5";
+ };
+
+ qup_spi14_default: qup-spi14-state {
+ pins = "gpio80", "gpio81", "gpio82", "gpio83";
+ function = "qup2_se0";
+ };
+
+ qup_spi15_default: qup-spi15-state {
+ pins = "gpio84", "gpio85", "gpio99", "gpio100";
+ function = "qup2_se1";
+ };
+
+ qup_spi16_default: qup-spi16-state {
+ pins = "gpio86", "gpio87", "gpio88", "gpio89";
+ function = "qup2_se2";
+ };
+
+ qup_spi17_default: qup-spi17-state {
+ pins = "gpio91", "gpio92", "gpio93", "gpio94";
+ function = "qup2_se3";
+ };
+
+ qup_spi18_default: qup-spi18-state {
+ pins = "gpio95", "gpio96", "gpio97", "gpio98";
+ function = "qup2_se4";
+ };
+
+ qup_spi19_default: qup-spi19-state {
+ pins = "gpio99", "gpio100", "gpio84", "gpio85";
+ function = "qup2_se5";
+ };
+
+ qup_spi20_default: qup-spi20-state {
+ pins = "gpio97", "gpio98", "gpio95", "gpio96";
+ function = "qup2_se6";
+ };
+
+ qup_spi21_default: qup-spi21-state {
+ pins = "gpio13", "gpio14", "gpio15", "gpio16";
+ function = "qup3_se0";
+ };
+
+ qup_uart0_default: qup-uart0-state {
+ qup_uart0_cts: qup-uart0-cts-pins {
+ pins = "gpio20";
+ function = "qup0_se0";
+ };
+
+ qup_uart0_rts: qup-uart0-rts-pins {
+ pins = "gpio21";
+ function = "qup0_se0";
+ };
+
+ qup_uart0_tx: qup-uart0-tx-pins {
+ pins = "gpio22";
+ function = "qup0_se0";
+ };
+
+ qup_uart0_rx: qup-uart0-rx-pins {
+ pins = "gpio23";
+ function = "qup0_se0";
+ };
+ };
+
+ qup_uart1_default: qup-uart1-state {
+ qup_uart1_cts: qup-uart1-cts-pins {
+ pins = "gpio24";
+ function = "qup0_se1";
+ };
+
+ qup_uart1_rts: qup-uart1-rts-pins {
+ pins = "gpio25";
+ function = "qup0_se1";
+ };
+
+ qup_uart1_tx: qup-uart1-tx-pins {
+ pins = "gpio26";
+ function = "qup0_se1";
+ };
+
+ qup_uart1_rx: qup-uart1-rx-pins {
+ pins = "gpio27";
+ function = "qup0_se1";
+ };
+ };
+
+ qup_uart2_default: qup-uart2-state {
+ qup_uart2_cts: qup-uart2-cts-pins {
+ pins = "gpio36";
+ function = "qup0_se2";
+ };
+
+ qup_uart2_rts: qup-uart2-rts-pins {
+ pins = "gpio37";
+ function = "qup0_se2";
+ };
+
+ qup_uart2_tx: qup-uart2-tx-pins {
+ pins = "gpio38";
+ function = "qup0_se2";
+ };
+
+ qup_uart2_rx: qup-uart2-rx-pins {
+ pins = "gpio39";
+ function = "qup0_se2";
+ };
+ };
+
+ qup_uart3_default: qup-uart3-state {
+ qup_uart3_cts: qup-uart3-cts-pins {
+ pins = "gpio28";
+ function = "qup0_se3";
+ };
+
+ qup_uart3_rts: qup-uart3-rts-pins {
+ pins = "gpio29";
+ function = "qup0_se3";
+ };
+
+ qup_uart3_tx: qup-uart3-tx-pins {
+ pins = "gpio30";
+ function = "qup0_se3";
+ };
+
+ qup_uart3_rx: qup-uart3-rx-pins {
+ pins = "gpio31";
+ function = "qup0_se3";
+ };
+ };
+
+ qup_uart4_default: qup-uart4-state {
+ qup_uart4_cts: qup-uart4-cts-pins {
+ pins = "gpio32";
+ function = "qup0_se4";
+ };
+
+ qup_uart4_rts: qup-uart4-rts-pins {
+ pins = "gpio33";
+ function = "qup0_se4";
+ };
+
+ qup_uart4_tx: qup-uart4-tx-pins {
+ pins = "gpio34";
+ function = "qup0_se4";
+ };
+
+ qup_uart4_rx: qup-uart4-rx-pins {
+ pins = "gpio35";
+ function = "qup0_se4";
+ };
+ };
+
+ qup_uart5_default: qup-uart5-state {
+ qup_uart5_cts: qup-uart5-cts-pins {
+ pins = "gpio36";
+ function = "qup0_se5";
+ };
+
+ qup_uart5_rts: qup-uart5-rts-pins {
+ pins = "gpio37";
+ function = "qup0_se5";
+ };
+
+ qup_uart5_tx: qup-uart5-tx-pins {
+ pins = "gpio38";
+ function = "qup0_se5";
+ };
+
+ qup_uart5_rx: qup-uart5-rx-pins {
+ pins = "gpio39";
+ function = "qup0_se5";
+ };
+ };
+
+ qup_uart7_default: qup-uart7-state {
+ qup_uart7_cts: qup-uart7-cts-pins {
+ pins = "gpio40";
+ function = "qup1_se0";
+ };
+
+ qup_uart7_rts: qup-uart7-rts-pins {
+ pins = "gpio41";
+ function = "qup1_se0";
+ };
+
+ qup_uart7_tx: qup-uart7-tx-pins {
+ pins = "gpio42";
+ function = "qup1_se0";
+ };
+
+ qup_uart7_rx: qup-uart7-rx-pins {
+ pins = "gpio43";
+ function = "qup1_se0";
+ };
+ };
+
+ qup_uart8_default: qup-uart8-state {
+ qup_uart8_cts: qup-uart8-cts-pins {
+ pins = "gpio42";
+ function = "qup1_se1";
+ };
+
+ qup_uart8_rts: qup-uart8-rts-pins {
+ pins = "gpio43";
+ function = "qup1_se1";
+ };
+
+ qup_uart8_tx: qup-uart8-tx-pins {
+ pins = "gpio40";
+ function = "qup1_se1";
+ };
+
+ qup_uart8_rx: qup-uart8-rx-pins {
+ pins = "gpio41";
+ function = "qup1_se1";
+ };
+ };
+
+ qup_uart9_default: qup-uart9-state {
+ qup_uart9_cts: qup-uart9-cts-pins {
+ pins = "gpio46";
+ function = "qup1_se2";
+ };
+
+ qup_uart9_rts: qup-uart9-rts-pins {
+ pins = "gpio47";
+ function = "qup1_se2";
+ };
+
+ qup_uart9_tx: qup-uart9-tx-pins {
+ pins = "gpio44";
+ function = "qup1_se2";
+ };
+
+ qup_uart9_rx: qup-uart9-rx-pins {
+ pins = "gpio45";
+ function = "qup1_se2";
+ };
+ };
+
+ qup_uart10_default: qup-uart10-state {
+ pins = "gpio46", "gpio47";
+ function = "qup1_se3";
+ };
+
+ qup_uart11_default: qup-uart11-state {
+ qup_uart11_cts: qup-uart11-cts-pins {
+ pins = "gpio48";
+ function = "qup1_se4";
+ };
+
+ qup_uart11_rts: qup-uart11-rts-pins {
+ pins = "gpio49";
+ function = "qup1_se4";
+ };
+
+ qup_uart11_tx: qup-uart11-tx-pins {
+ pins = "gpio50";
+ function = "qup1_se4";
+ };
+
+ qup_uart11_rx: qup-uart11-rx-pins {
+ pins = "gpio51";
+ function = "qup1_se4";
+ };
+ };
+
+ qup_uart12_default: qup-uart12-state {
+ qup_uart12_cts: qup-uart12-cts-pins {
+ pins = "gpio52";
+ function = "qup1_se5";
+ };
+
+ qup_uart12_rts: qup-uart12-rts-pins {
+ pins = "gpio53";
+ function = "qup1_se5";
+ };
+
+ qup_uart12_tx: qup-uart12-tx-pins {
+ pins = "gpio54";
+ function = "qup1_se5";
+ };
+
+ qup_uart12_rx: qup-uart12-rx-pins {
+ pins = "gpio55";
+ function = "qup1_se5";
+ };
+ };
+
+ qup_uart14_default: qup-uart14-state {
+ qup_uart14_cts: qup-uart14-cts-pins {
+ pins = "gpio80";
+ function = "qup2_se0";
+ };
+
+ qup_uart14_rts: qup-uart14-rts-pins {
+ pins = "gpio81";
+ function = "qup2_se0";
+ };
+
+ qup_uart14_tx: qup-uart14-tx-pins {
+ pins = "gpio82";
+ function = "qup2_se0";
+ };
+
+ qup_uart14_rx: qup-uart14-rx-pins {
+ pins = "gpio83";
+ function = "qup2_se0";
+ };
+ };
+
+ qup_uart15_default: qup-uart15-state {
+ qup_uart15_cts: qup-uart15-cts-pins {
+ pins = "gpio84";
+ function = "qup2_se1";
+ };
+
+ qup_uart15_rts: qup-uart15-rts-pins {
+ pins = "gpio85";
+ function = "qup2_se1";
+ };
+
+ qup_uart15_tx: qup-uart15-tx-pins {
+ pins = "gpio99";
+ function = "qup2_se1";
+ };
+
+ qup_uart15_rx: qup-uart15-rx-pins {
+ pins = "gpio100";
+ function = "qup2_se1";
+ };
+ };
+
+ qup_uart16_default: qup-uart16-state {
+ qup_uart16_cts: qup-uart16-cts-pins {
+ pins = "gpio86";
+ function = "qup2_se2";
+ };
+
+ qup_uart16_rts: qup-uart16-rts-pins {
+ pins = "gpio87";
+ function = "qup2_se2";
+ };
+
+ qup_uart16_tx: qup-uart16-tx-pins {
+ pins = "gpio88";
+ function = "qup2_se2";
+ };
+
+ qup_uart16_rx: qup-uart16-rx-pins {
+ pins = "gpio89";
+ function = "qup2_se2";
+ };
+ };
+
+ qup_uart17_default: qup-uart17-state {
+ qup_uart17_cts: qup-uart17-cts-pins {
+ pins = "gpio91";
+ function = "qup2_se3";
+ };
+
+ qup_uart17_rts: qup0-uart17-rts-pins {
+ pins = "gpio92";
+ function = "qup2_se3";
+ };
+
+ qup_uart17_tx: qup0-uart17-tx-pins {
+ pins = "gpio93";
+ function = "qup2_se3";
+ };
+
+ qup_uart17_rx: qup0-uart17-rx-pins {
+ pins = "gpio94";
+ function = "qup2_se3";
+ };
+ };
+
+ qup_uart18_default: qup-uart18-state {
+ qup_uart18_cts: qup-uart18-cts-pins {
+ pins = "gpio95";
+ function = "qup2_se4";
+ };
+
+ qup_uart18_rts: qup-uart18-rts-pins {
+ pins = "gpio96";
+ function = "qup2_se4";
+ };
+
+ qup_uart18_tx: qup-uart18-tx-pins {
+ pins = "gpio97";
+ function = "qup2_se4";
+ };
+
+ qup_uart18_rx: qup-uart18-rx-pins {
+ pins = "gpio98";
+ function = "qup2_se4";
+ };
+ };
+
+ qup_uart19_default: qup-uart19-state {
+ qup_uart19_cts: qup-uart19-cts-pins {
+ pins = "gpio99";
+ function = "qup2_se5";
+ };
+
+ qup_uart19_rts: qup-uart19-rts-pins {
+ pins = "gpio100";
+ function = "qup2_se5";
+ };
+
+ qup_uart19_tx: qup-uart19-tx-pins {
+ pins = "gpio84";
+ function = "qup2_se5";
+ };
+
+ qup_uart19_rx: qup-uart19-rx-pins {
+ pins = "gpio85";
+ function = "qup2_se5";
+ };
+ };
+
+ qup_uart20_default: qup-uart20-state {
+ qup_uart20_cts: qup-uart20-cts-pins {
+ pins = "gpio97";
+ function = "qup2_se6";
+ };
+
+ qup_uart20_rts: qup-uart20-rts-pins {
+ pins = "gpio98";
+ function = "qup2_se6";
+ };
+
+ qup_uart20_tx: qup-uart20-tx-pins {
+ pins = "gpio95";
+ function = "qup2_se6";
+ };
+
+ qup_uart20_rx: qup-uart20-rx-pins {
+ pins = "gpio96";
+ function = "qup2_se6";
+ };
+ };
+
+ qup_uart21_default: qup-uart21-state {
+ qup_uart21_cts: qup-uart21-cts-pins {
+ pins = "gpio13";
+ function = "qup3_se0";
+ };
+
+ qup_uart21_rts: qup-uart21-rts-pins {
+ pins = "gpio14";
+ function = "qup3_se0";
+ };
+
+ qup_uart21_tx: qup-uart21-tx-pins {
+ pins = "gpio15";
+ function = "qup3_se0";
+ };
+
+ qup_uart21_rx: qup-uart21-rx-pins {
+ pins = "gpio16";
+ function = "qup3_se0";
+ };
+ };
};
sram: sram@146d8000 {
--
2.34.1On Tue, Apr 29, 2025 at 11:03:34PM +0530, Viken Dadhaniya wrote:
> Default pinctrl configurations for all QUP (Qualcomm Universal Peripheral)
> Serial Engines (SEs) are missing in the SoC device tree. These
> configurations are required by client teams when enabling any SEs as I2C,
> SPI, or Serial protocols.
>
> Add default pin configurations for Serial Engines (SEs) for all supported
> protocols, including I2C, SPI, and UART, to the sa8775p device tree. This
> change facilitates slave device driver clients to enable usecase with
> minimal modifications.
>
> Remove duplicate pin configurations from target-specific file as same pin
> configuration is included in the SoC device tree.
>
> Signed-off-by: Viken Dadhaniya <quic_vdadhani@quicinc.com>
> ---
> v2 -> v3:
>
> - Remove duplicate pin configurations from target-specific file.
>
> v2 Link: https://lore.kernel.org/lkml/20250324151047.842648-1-quic_vdadhani@quicinc.com/
>
> v1 -> v2:
>
> - Drop drive-strength and bias property from soc dtsi.
> - Update commit log.
>
> v1 Link: https://lore.kernel.org/lkml/20250225154136.3052757-1-quic_vdadhani@quicinc.com/
> ---
> ---
> ---
> arch/arm64/boot/dts/qcom/sa8775p-ride.dtsi | 35 -
> arch/arm64/boot/dts/qcom/sa8775p.dtsi | 750 +++++++++++++++++++++
> 2 files changed, 750 insertions(+), 35 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/sa8775p-ride.dtsi b/arch/arm64/boot/dts/qcom/sa8775p-ride.dtsi
> index 967913169539..3b4243ef37e7 100644
> --- a/arch/arm64/boot/dts/qcom/sa8775p-ride.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sa8775p-ride.dtsi
> @@ -508,15 +508,11 @@ queue3 {
>
> &i2c11 {
> clock-frequency = <400000>;
> - pinctrl-0 = <&qup_i2c11_default>;
> - pinctrl-names = "default";
> status = "okay";
> };
>
> &i2c18 {
> clock-frequency = <400000>;
> - pinctrl-0 = <&qup_i2c18_default>;
> - pinctrl-names = "default";
> status = "okay";
> };
>
> @@ -678,8 +674,6 @@ &sleep_clk {
> };
>
> &spi16 {
> - pinctrl-0 = <&qup_spi16_default>;
> - pinctrl-names = "default";
> status = "okay";
> };
>
> @@ -712,80 +706,53 @@ ethernet0_mdio: ethernet0-mdio-pins {
> };
> };
>
> - qup_uart10_default: qup-uart10-state {
> - pins = "gpio46", "gpio47";
> - function = "qup1_se3";
> - };
> -
> qup_spi16_default: qup-spi16-state {
> - pins = "gpio86", "gpio87", "gpio88", "gpio89";
> - function = "qup2_se2";
> drive-strength = <6>;
> bias-disable;
> };
If you are movign parts of these pinstates to the sa8775p.dtsi, then you
should also turn these declarations into label-based updates:
&qup_spi16_default {
drive-strength = <6>;
bias-disable;
};
Otherwise the configuration is fragile: if the name gets changed, then
two parts will not match.
>
> qup_i2c11_default: qup-i2c11-state {
> - pins = "gpio48", "gpio49";
> - function = "qup1_se4";
> drive-strength = <2>;
> bias-pull-up;
> };
>
>
--
With best wishes
Dmitry
On 5/3/2025 11:11 AM, Dmitry Baryshkov wrote:
> On Tue, Apr 29, 2025 at 11:03:34PM +0530, Viken Dadhaniya wrote:
>> Default pinctrl configurations for all QUP (Qualcomm Universal Peripheral)
>> Serial Engines (SEs) are missing in the SoC device tree. These
>> configurations are required by client teams when enabling any SEs as I2C,
>> SPI, or Serial protocols.
>>
>> Add default pin configurations for Serial Engines (SEs) for all supported
>> protocols, including I2C, SPI, and UART, to the sa8775p device tree. This
>> change facilitates slave device driver clients to enable usecase with
>> minimal modifications.
>>
>> Remove duplicate pin configurations from target-specific file as same pin
>> configuration is included in the SoC device tree.
>>
>> Signed-off-by: Viken Dadhaniya <quic_vdadhani@quicinc.com>
>> ---
>> v2 -> v3:
>>
>> - Remove duplicate pin configurations from target-specific file.
>>
>> v2 Link: https://lore.kernel.org/lkml/20250324151047.842648-1-quic_vdadhani@quicinc.com/
>>
>> v1 -> v2:
>>
>> - Drop drive-strength and bias property from soc dtsi.
>> - Update commit log.
>>
>> v1 Link: https://lore.kernel.org/lkml/20250225154136.3052757-1-quic_vdadhani@quicinc.com/
>> ---
>> ---
>> ---
>> arch/arm64/boot/dts/qcom/sa8775p-ride.dtsi | 35 -
>> arch/arm64/boot/dts/qcom/sa8775p.dtsi | 750 +++++++++++++++++++++
>> 2 files changed, 750 insertions(+), 35 deletions(-)
>>
>> diff --git a/arch/arm64/boot/dts/qcom/sa8775p-ride.dtsi b/arch/arm64/boot/dts/qcom/sa8775p-ride.dtsi
>> index 967913169539..3b4243ef37e7 100644
>> --- a/arch/arm64/boot/dts/qcom/sa8775p-ride.dtsi
>> +++ b/arch/arm64/boot/dts/qcom/sa8775p-ride.dtsi
>> @@ -508,15 +508,11 @@ queue3 {
>>
>> &i2c11 {
>> clock-frequency = <400000>;
>> - pinctrl-0 = <&qup_i2c11_default>;
>> - pinctrl-names = "default";
>> status = "okay";
>> };
>>
>> &i2c18 {
>> clock-frequency = <400000>;
>> - pinctrl-0 = <&qup_i2c18_default>;
>> - pinctrl-names = "default";
>> status = "okay";
>> };
>>
>> @@ -678,8 +674,6 @@ &sleep_clk {
>> };
>>
>> &spi16 {
>> - pinctrl-0 = <&qup_spi16_default>;
>> - pinctrl-names = "default";
>> status = "okay";
>> };
>>
>> @@ -712,80 +706,53 @@ ethernet0_mdio: ethernet0-mdio-pins {
>> };
>> };
>>
>> - qup_uart10_default: qup-uart10-state {
>> - pins = "gpio46", "gpio47";
>> - function = "qup1_se3";
>> - };
>> -
>> qup_spi16_default: qup-spi16-state {
>> - pins = "gpio86", "gpio87", "gpio88", "gpio89";
>> - function = "qup2_se2";
>> drive-strength = <6>;
>> bias-disable;
>> };
>
> If you are movign parts of these pinstates to the sa8775p.dtsi, then you
> should also turn these declarations into label-based updates:
>
> &qup_spi16_default {
> drive-strength = <6>;
> bias-disable;
> };
>
> Otherwise the configuration is fragile: if the name gets changed, then
> two parts will not match.
>
Sure, Updated in v4.
>>
>> qup_i2c11_default: qup-i2c11-state {
>> - pins = "gpio48", "gpio49";
>> - function = "qup1_se4";
>> drive-strength = <2>;
>> bias-pull-up;
>> };
>>
>>
>
Change looks good to me. On 4/29/2025 11:03 PM, Viken Dadhaniya wrote: > Default pinctrl configurations for all QUP (Qualcomm Universal Peripheral) > Serial Engines (SEs) are missing in the SoC device tree. These > configurations are required by client teams when enabling any SEs as I2C, > SPI, or Serial protocols. > > Add default pin configurations for Serial Engines (SEs) for all supported > protocols, including I2C, SPI, and UART, to the sa8775p device tree. This > change facilitates slave device driver clients to enable usecase with > minimal modifications. > > Remove duplicate pin configurations from target-specific file as same pin > configuration is included in the SoC device tree. > > Signed-off-by: Viken Dadhaniya <quic_vdadhani@quicinc.com> Acked-by: Mukesh Kumar Savaliya <quic_msavaliy@quicinc.com> > --- > v2 -> v3: > > - Remove duplicate pin configurations from target-specific file. > > v2 Link: https://lore.kernel.org/lkml/20250324151047.842648-1-quic_vdadhani@quicinc.com/ > > v1 -> v2: > > - Drop drive-strength and bias property from soc dtsi. > - Update commit log. > > v1 Link: https://lore.kernel.org/lkml/20250225154136.3052757-1-quic_vdadhani@quicinc.com/ > ---
© 2016 - 2026 Red Hat, Inc.