This series adds support for Tegra186 pin control, based on a downstream
driver, updated to match the existing Tegra194 driver.

Signed-off-by: Aaron Kling <webgeek1234@gmail.com>
---
Aaron Kling (4):
      dt-bindings: pinctrl: Document Tegra186 pin controllers
      dt-bindings: gpio: tegra186: Add gpio-ranges
      pinctrl: tegra: Add Tegra186 pinmux driver
      arm64: tegra: Add Tegra186 pin controllers

 .../bindings/gpio/nvidia,tegra186-gpio.yaml        |    3 +
 .../bindings/pinctrl/nvidia,tegra186-pinmux.yaml   |  285 ++++
 arch/arm64/boot/dts/nvidia/tegra186.dtsi           |   12 +
 drivers/pinctrl/tegra/Kconfig                      |    4 +
 drivers/pinctrl/tegra/Makefile                     |    1 +
 drivers/pinctrl/tegra/pinctrl-tegra186.c           | 1784 ++++++++++++++++++++
 drivers/soc/tegra/Kconfig                          |    1 +
 7 files changed, 2090 insertions(+)
---
base-commit: 1110ce6a1e34fe1fdc1bfe4ad52405f327d5083b
change-id: 20250308-tegra186-pinctrl-651ffbbbe816

Best regards,
-- 
Aaron Kling <webgeek1234@gmail.com>

On Tue, Apr 29, 2025 at 4:33 PM Aaron Kling via B4 Relay
<devnull+webgeek1234.gmail.com@kernel.org> wrote:
>
> This series adds support for Tegra186 pin control, based on a downstream
> driver, updated to match the existing Tegra194 driver.
>
> Signed-off-by: Aaron Kling <webgeek1234@gmail.com>
> ---
> Aaron Kling (4):
>       dt-bindings: pinctrl: Document Tegra186 pin controllers
>       dt-bindings: gpio: tegra186: Add gpio-ranges
>       pinctrl: tegra: Add Tegra186 pinmux driver
>       arm64: tegra: Add Tegra186 pin controllers
>
>  .../bindings/gpio/nvidia,tegra186-gpio.yaml        |    3 +
>  .../bindings/pinctrl/nvidia,tegra186-pinmux.yaml   |  285 ++++
>  arch/arm64/boot/dts/nvidia/tegra186.dtsi           |   12 +
>  drivers/pinctrl/tegra/Kconfig                      |    4 +
>  drivers/pinctrl/tegra/Makefile                     |    1 +
>  drivers/pinctrl/tegra/pinctrl-tegra186.c           | 1784 ++++++++++++++++++++
>  drivers/soc/tegra/Kconfig                          |    1 +
>  7 files changed, 2090 insertions(+)
> ---
> base-commit: 1110ce6a1e34fe1fdc1bfe4ad52405f327d5083b
> change-id: 20250308-tegra186-pinctrl-651ffbbbe816
>
> Best regards,
> --
> Aaron Kling <webgeek1234@gmail.com>
>
>
Thierry and Jonathan, as the maintainers for the other tegra pinmux
drivers, I listed you as the maintainers for this one in the dt
bindings. And I think MAINTAINERS will do that by default for the
driver itself. Are you okay with taking over ongoing maintenance for
this one once it is approved for merge? I made it match the others as
closely as possible, so it shouldn't need any additional changes over
time that the others don't. But I don't want to sign anyone up for
work without prior approval.

Sincerely,
Aaron

On Tue, Apr 29, 2025 at 4:38 PM Aaron Kling <webgeek1234@gmail.com> wrote:
>
> On Tue, Apr 29, 2025 at 4:33 PM Aaron Kling via B4 Relay
> <devnull+webgeek1234.gmail.com@kernel.org> wrote:
> >
> > This series adds support for Tegra186 pin control, based on a downstream
> > driver, updated to match the existing Tegra194 driver.
> >
> > Signed-off-by: Aaron Kling <webgeek1234@gmail.com>
> > ---
> > Aaron Kling (4):
> >       dt-bindings: pinctrl: Document Tegra186 pin controllers
> >       dt-bindings: gpio: tegra186: Add gpio-ranges
> >       pinctrl: tegra: Add Tegra186 pinmux driver
> >       arm64: tegra: Add Tegra186 pin controllers
> >
> >  .../bindings/gpio/nvidia,tegra186-gpio.yaml        |    3 +
> >  .../bindings/pinctrl/nvidia,tegra186-pinmux.yaml   |  285 ++++
> >  arch/arm64/boot/dts/nvidia/tegra186.dtsi           |   12 +
> >  drivers/pinctrl/tegra/Kconfig                      |    4 +
> >  drivers/pinctrl/tegra/Makefile                     |    1 +
> >  drivers/pinctrl/tegra/pinctrl-tegra186.c           | 1784 ++++++++++++++++++++
> >  drivers/soc/tegra/Kconfig                          |    1 +
> >  7 files changed, 2090 insertions(+)
> > ---
> > base-commit: 1110ce6a1e34fe1fdc1bfe4ad52405f327d5083b
> > change-id: 20250308-tegra186-pinctrl-651ffbbbe816
> >
> > Best regards,
> > --
> > Aaron Kling <webgeek1234@gmail.com>
> >
> >
> Thierry and Jonathan, as the maintainers for the other tegra pinmux
> drivers, I listed you as the maintainers for this one in the dt
> bindings. And I think MAINTAINERS will do that by default for the
> driver itself. Are you okay with taking over ongoing maintenance for
> this one once it is approved for merge? I made it match the others as
> closely as possible, so it shouldn't need any additional changes over
> time that the others don't. But I don't want to sign anyone up for
> work without prior approval.
>
> Sincerely,
> Aaron

Friendly reminder about this series.

Sincerely,
Aaron

On Wed, May 28, 2025 at 7:37 PM Aaron Kling <webgeek1234@gmail.com> wrote:

> Friendly reminder about this series.

Can you rebase it on v6.16-rc1 as it comes out next monday and resend?

I will apply it if noone replies with review comments quickly because no
way you should have to wait so long for reviews.

Yours,
Linus Walleij

From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>


On Tue, 29 Apr 2025 16:33:29 -0500, Aaron Kling wrote:
> This series adds support for Tegra186 pin control, based on a downstream
> driver, updated to match the existing Tegra194 driver.
> 
> 

Applied, thanks!

[2/4] dt-bindings: gpio: tegra186: Add gpio-ranges
      https://git.kernel.org/brgl/linux/c/1275c70c4c1ca764cbf9ced01fb4286e4f49747e

Best regards,
-- 
Bartosz Golaszewski <bartosz.golaszewski@linaro.org>