1. Patchew
  2. linux
  3. [PATCH 0/2] Add support for rk3399 industry evaluation board
  4. View patch

[PATCH 2/2] arm64: dts: rockchip: Add rk3399-evb-ind board

Chaoyi Chen posted 2 patches 7 months, 3 weeks ago
There is a newer version of this series
[PATCH 2/2] arm64: dts: rockchip: Add rk3399-evb-ind board
Posted by Chaoyi Chen 7 months, 3 weeks ago 
From: Chaoyi Chen <chaoyi.chen@rock-chips.com>

General feature for rk3399 industry evaluation board:
- Rockchip RK3399
- 4GB LPDDR4
- emmc5.1
- SDIO3.0 compatible TF card
- 1x HDMI2.0a TX
- 1x HDMI1.4b RX with TC358749XBG HDMI to MIPI CSI2 bridge chip
- 1x type-c DisplayPort
- 3x USB3.0 Host
- 1x USB2.0 Host
- 1x Ethernet / USB3.0 to Ethernet

Tested with HDMI/GPU/USB2.0/USB3.0/Ethernet/TF card/emmc.

Signed-off-by: Chaoyi Chen <chaoyi.chen@rock-chips.com>
---
 arch/arm64/boot/dts/rockchip/Makefile         |   1 +
 .../boot/dts/rockchip/rk3399-evb-ind.dts      | 222 ++++++++++++++++++
 2 files changed, 223 insertions(+)
 create mode 100644 arch/arm64/boot/dts/rockchip/rk3399-evb-ind.dts

diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
index 3e8771ef69ba..8a3adb7482ca 100644
--- a/arch/arm64/boot/dts/rockchip/Makefile
+++ b/arch/arm64/boot/dts/rockchip/Makefile
@@ -40,6 +40,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-px5-evb.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-r88.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-eaidk-610.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-evb.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-evb-ind.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-ficus.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-firefly.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-gru-bob.dtb
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-evb-ind.dts b/arch/arm64/boot/dts/rockchip/rk3399-evb-ind.dts
new file mode 100644
index 000000000000..a995d4ff202d
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399-evb-ind.dts
@@ -0,0 +1,222 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2025 Rockchip Electronics Co., Ltd.
+ */
+
+/dts-v1/;
+#include "rk3399-base.dtsi"
+
+/ {
+	model = "Rockchip RK3399 EVB IND LPDDR4 Board";
+	compatible = "rockchip,rk3399-evb-ind", "rockchip,rk3399";
+
+	aliases {
+		ethernet0 = &gmac;
+		mmc0 = &sdhci;
+		mmc1 = &sdmmc;
+	};
+
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	clkin_gmac: external-gmac-clock {
+		compatible = "fixed-clock";
+		clock-frequency = <125000000>;
+		clock-output-names = "clkin_gmac";
+		#clock-cells = <0>;
+	};
+
+	vcc5v0_sys: regulator-vcc5v0-sys {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>;
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+	};
+
+	vcc_phy: regulator-vcc-phy {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-name = "vcc_phy";
+	};
+};
+
+&emmc_phy {
+	status = "okay";
+};
+
+&gmac {
+	assigned-clocks = <&cru SCLK_RMII_SRC>;
+	assigned-clock-parents = <&clkin_gmac>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins>;
+	clock_in_out = "input";
+	phy-supply = <&vcc_phy>;
+	phy-mode = "rgmii";
+	snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 10000 150000>;
+	tx_delay = <0x22>;
+	rx_delay = <0x23>;
+	status = "okay";
+};
+
+&gpu {
+	mali-supply = <&vdd_gpu>;
+	status = "okay";
+};
+
+&hdmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hdmi_i2c_xfer>, <&hdmi_cec>;
+	status = "okay";
+};
+
+&hdmi_in_vopl {
+	status = "disabled";
+};
+
+&hdmi_sound {
+	status = "okay";
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+	i2c-scl-falling-time-ns = <4>;
+	i2c-scl-rising-time-ns = <168>;
+	status = "okay";
+
+	vdd_gpu: tcs4526@10 {
+		compatible = "tcs,tcs4525";
+		reg = <0x10>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vsel2_gpio>;
+		fcs,suspend-voltage-selector = <1>;
+		vin-supply = <&vcc5v0_sys>;
+		vsel-gpios = <&gpio1 RK_PB6 GPIO_ACTIVE_HIGH>;
+		regulator-compatible = "fan53555-reg";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-initial-state = <3>;
+		regulator-max-microvolt = <1500000>;
+		regulator-min-microvolt = <712500>;
+		regulator-name = "vdd_gpu";
+		regulator-ramp-delay = <1000>;
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	max-frequency = <150000000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
+	status = "okay";
+};
+
+&sdhci {
+	bus-width = <8>;
+	keep-power-in-suspend;
+	mmc-hs400-1_8v;
+	mmc-hs400-enhanced-strobe;
+	no-sdio;
+	no-sd;
+	non-removable;
+	status = "okay";
+};
+
+&tcphy0 {
+	status = "okay";
+};
+
+&tcphy1 {
+	status = "okay";
+};
+
+&u2phy0 {
+	status = "okay";
+};
+
+&u2phy0_host {
+	status = "okay";
+};
+
+&u2phy0_otg {
+	status = "okay";
+};
+
+&u2phy1 {
+	status = "okay";
+};
+
+&u2phy1_host {
+	status = "okay";
+};
+
+&u2phy1_otg {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&usbdrd_dwc3_0 {
+	status = "okay";
+};
+
+&usbdrd3_0 {
+	status = "okay";
+};
+
+&usbdrd3_1 {
+	status = "okay";
+};
+
+&usbdrd_dwc3_1 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&usb_host1_ehci {
+	status = "okay";
+};
+
+&usb_host1_ohci {
+	status = "okay";
+};
+
+&pinctrl {
+	pmic {
+		vsel2_gpio: vsel2-gpio {
+			rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+};
+
+&vopb {
+	status = "okay";
+};
+
+&vopb_mmu {
+	status = "okay";
+};
-- 
2.49.0
Re: [PATCH 2/2] arm64: dts: rockchip: Add rk3399-evb-ind board
Posted by Quentin Schulz 7 months, 3 weeks ago 
Hi Chaoyi,

On 4/27/25 11:42 AM, Chaoyi Chen wrote:
> From: Chaoyi Chen <chaoyi.chen@rock-chips.com>
> 
> General feature for rk3399 industry evaluation board:
> - Rockchip RK3399
> - 4GB LPDDR4
> - emmc5.1
> - SDIO3.0 compatible TF card
> - 1x HDMI2.0a TX
> - 1x HDMI1.4b RX with TC358749XBG HDMI to MIPI CSI2 bridge chip
> - 1x type-c DisplayPort
> - 3x USB3.0 Host
> - 1x USB2.0 Host
> - 1x Ethernet / USB3.0 to Ethernet
> 

Are there publicly available schematics by any chance?

> Tested with HDMI/GPU/USB2.0/USB3.0/Ethernet/TF card/emmc.
> 
> Signed-off-by: Chaoyi Chen <chaoyi.chen@rock-chips.com>
> ---
>   arch/arm64/boot/dts/rockchip/Makefile         |   1 +
>   .../boot/dts/rockchip/rk3399-evb-ind.dts      | 222 ++++++++++++++++++
>   2 files changed, 223 insertions(+)
>   create mode 100644 arch/arm64/boot/dts/rockchip/rk3399-evb-ind.dts
> 
> diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
> index 3e8771ef69ba..8a3adb7482ca 100644
> --- a/arch/arm64/boot/dts/rockchip/Makefile
> +++ b/arch/arm64/boot/dts/rockchip/Makefile
> @@ -40,6 +40,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-px5-evb.dtb
>   dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-r88.dtb
>   dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-eaidk-610.dtb
>   dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-evb.dtb
> +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-evb-ind.dtb
>   dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-ficus.dtb
>   dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-firefly.dtb
>   dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-gru-bob.dtb
> diff --git a/arch/arm64/boot/dts/rockchip/rk3399-evb-ind.dts b/arch/arm64/boot/dts/rockchip/rk3399-evb-ind.dts
> new file mode 100644
> index 000000000000..a995d4ff202d
> --- /dev/null
> +++ b/arch/arm64/boot/dts/rockchip/rk3399-evb-ind.dts
> @@ -0,0 +1,222 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright (c) 2025 Rockchip Electronics Co., Ltd.
> + */
> +
> +/dts-v1/;
> +#include "rk3399-base.dtsi"
> +
> +/ {
> +	model = "Rockchip RK3399 EVB IND LPDDR4 Board";
> +	compatible = "rockchip,rk3399-evb-ind", "rockchip,rk3399";
> +
> +	aliases {
> +		ethernet0 = &gmac;
> +		mmc0 = &sdhci;
> +		mmc1 = &sdmmc;
> +	};
> +
> +	chosen {
> +		stdout-path = "serial2:1500000n8";
> +	};
> +
> +	clkin_gmac: external-gmac-clock {
> +		compatible = "fixed-clock";
> +		clock-frequency = <125000000>;
> +		clock-output-names = "clkin_gmac";
> +		#clock-cells = <0>;
> +	};
> +
> +	vcc5v0_sys: regulator-vcc5v0-sys {
> +		compatible = "regulator-fixed";
> +		enable-active-high;
> +		gpio = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>;
> +		regulator-name = "vcc5v0_sys";
> +		regulator-always-on;
> +		regulator-boot-on;
> +		regulator-max-microvolt = <5000000>;
> +		regulator-min-microvolt = <5000000>;
> +	};
> +
> +	vcc_phy: regulator-vcc-phy {
> +		compatible = "regulator-fixed";
> +		regulator-always-on;
> +		regulator-boot-on;
> +		regulator-name = "vcc_phy";
> +	};
> +};
> +
> +&emmc_phy {
> +	status = "okay";
> +};
> +
> +&gmac {
> +	assigned-clocks = <&cru SCLK_RMII_SRC>;
> +	assigned-clock-parents = <&clkin_gmac>;
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&rgmii_pins>;
> +	clock_in_out = "input";
> +	phy-supply = <&vcc_phy>;
> +	phy-mode = "rgmii";
> +	snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
> +	snps,reset-active-low;
> +	snps,reset-delays-us = <0 10000 150000>;
> +	tx_delay = <0x22>;
> +	rx_delay = <0x23>;
> +	status = "okay";
> +};
> +
> +&gpu {
> +	mali-supply = <&vdd_gpu>;
> +	status = "okay";
> +};
> +
> +&hdmi {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&hdmi_i2c_xfer>, <&hdmi_cec>;
> +	status = "okay";
> +};
> +
> +&hdmi_in_vopl {
> +	status = "disabled";
> +};
> +

Why disabled?

> +&hdmi_sound {
> +	status = "okay";
> +};
> +
> +&i2c0 {
> +	clock-frequency = <400000>;
> +	i2c-scl-falling-time-ns = <4>;
> +	i2c-scl-rising-time-ns = <168>;
> +	status = "okay";
> +
> +	vdd_gpu: tcs4526@10 {
> +		compatible = "tcs,tcs4525";
> +		reg = <0x10>;
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&vsel2_gpio>;
> +		fcs,suspend-voltage-selector = <1>;
> +		vin-supply = <&vcc5v0_sys>;
> +		vsel-gpios = <&gpio1 RK_PB6 GPIO_ACTIVE_HIGH>;
> +		regulator-compatible = "fan53555-reg";
> +		regulator-always-on;
> +		regulator-boot-on;
> +		regulator-initial-state = <3>;
> +		regulator-max-microvolt = <1500000>;
> +		regulator-min-microvolt = <712500>;
> +		regulator-name = "vdd_gpu";
> +		regulator-ramp-delay = <1000>;
> +		regulator-state-mem {
> +			regulator-off-in-suspend;
> +		};

No RK80x PMIC on this board?

> +	};
> +};
> +

Missing io_domains here no? I guess it'll rely on the addition of the 
RK80x PMIC for this to work?

> +&sdmmc {
> +	bus-width = <4>;
> +	cap-mmc-highspeed;
> +	cap-sd-highspeed;
> +	cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
> +	disable-wp;
> +	max-frequency = <150000000>;

It's already defaulting to that frequency in rk3399-base.dtsi so no need 
to duplicate the info here.

> +	pinctrl-names = "default";
> +	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
> +	status = "okay";
> +};
> +
> +&sdhci {
> +	bus-width = <8>;
> +	keep-power-in-suspend;
> +	mmc-hs400-1_8v;
> +	mmc-hs400-enhanced-strobe;
> +	no-sdio;
> +	no-sd;
> +	non-removable;
> +	status = "okay";
> +};
> +
> +&tcphy0 {
> +	status = "okay";
> +};
> +
> +&tcphy1 {
> +	status = "okay";
> +};
> +
> +&u2phy0 {
> +	status = "okay";
> +};
> +
> +&u2phy0_host {
> +	status = "okay";
> +};
> +
> +&u2phy0_otg {
> +	status = "okay";
> +};
> +
> +&u2phy1 {
> +	status = "okay";
> +};
> +
> +&u2phy1_host {
> +	status = "okay";
> +};
> +
> +&u2phy1_otg {
> +	status = "okay";
> +};
> +
> +&uart2 {
> +	status = "okay";
> +};
> +
> +&usbdrd_dwc3_0 {
> +	status = "okay";
> +};
> +
> +&usbdrd3_0 {
> +	status = "okay";
> +};
> +
> +&usbdrd3_1 {
> +	status = "okay";
> +};
> +
> +&usbdrd_dwc3_1 {
> +	dr_mode = "host";
> +	status = "okay";
> +};
> +
> +&usb_host0_ehci {
> +	status = "okay";
> +};
> +
> +&usb_host0_ohci {
> +	status = "okay";
> +};
> +
> +&usb_host1_ehci {
> +	status = "okay";
> +};
> +
> +&usb_host1_ohci {
> +	status = "okay";
> +};
> +
> +&pinctrl {
> +	pmic {
> +		vsel2_gpio: vsel2-gpio {
> +			rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
> +		};
> +	};
> +};
> +
> +&vopb {
> +	status = "okay";
> +};
> +
> +&vopb_mmu {
> +	status = "okay";
> +};

Why no vopl?

Cheers,
Quentin
Re: [PATCH 2/2] arm64: dts: rockchip: Add rk3399-evb-ind board
Posted by Chaoyi Chen 7 months, 3 weeks ago 
Hi Quentin,

On 2025/4/28 16:19, Quentin Schulz wrote:
> Hi Chaoyi,
>
> On 4/27/25 11:42 AM, Chaoyi Chen wrote:
>> From: Chaoyi Chen <chaoyi.chen@rock-chips.com>
>>
>> General feature for rk3399 industry evaluation board:
>> - Rockchip RK3399
>> - 4GB LPDDR4
>> - emmc5.1
>> - SDIO3.0 compatible TF card
>> - 1x HDMI2.0a TX
>> - 1x HDMI1.4b RX with TC358749XBG HDMI to MIPI CSI2 bridge chip
>> - 1x type-c DisplayPort
>> - 3x USB3.0 Host
>> - 1x USB2.0 Host
>> - 1x Ethernet / USB3.0 to Ethernet
>>
>
> Are there publicly available schematics by any chance?

Sorry, there is no publicly available information at present.


>
>> Tested with HDMI/GPU/USB2.0/USB3.0/Ethernet/TF card/emmc.
>>
>> Signed-off-by: Chaoyi Chen <chaoyi.chen@rock-chips.com>
>> ---
>>   arch/arm64/boot/dts/rockchip/Makefile         |   1 +
>>   .../boot/dts/rockchip/rk3399-evb-ind.dts      | 222 ++++++++++++++++++
>>   2 files changed, 223 insertions(+)
>>   create mode 100644 arch/arm64/boot/dts/rockchip/rk3399-evb-ind.dts
>>
>> diff --git a/arch/arm64/boot/dts/rockchip/Makefile 
>> b/arch/arm64/boot/dts/rockchip/Makefile
>> index 3e8771ef69ba..8a3adb7482ca 100644
>> --- a/arch/arm64/boot/dts/rockchip/Makefile
>> +++ b/arch/arm64/boot/dts/rockchip/Makefile
>> @@ -40,6 +40,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-px5-evb.dtb
>>   dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-r88.dtb
>>   dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-eaidk-610.dtb
>>   dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-evb.dtb
>> +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-evb-ind.dtb
>>   dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-ficus.dtb
>>   dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-firefly.dtb
>>   dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-gru-bob.dtb
>> diff --git a/arch/arm64/boot/dts/rockchip/rk3399-evb-ind.dts 
>> b/arch/arm64/boot/dts/rockchip/rk3399-evb-ind.dts
>> new file mode 100644
>> index 000000000000..a995d4ff202d
>> --- /dev/null
>> +++ b/arch/arm64/boot/dts/rockchip/rk3399-evb-ind.dts
>> @@ -0,0 +1,222 @@
>> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
>> +/*
>> + * Copyright (c) 2025 Rockchip Electronics Co., Ltd.
>> + */
>> +
>> +/dts-v1/;
>> +#include "rk3399-base.dtsi"
>> +
>> +/ {
>> +    model = "Rockchip RK3399 EVB IND LPDDR4 Board";
>> +    compatible = "rockchip,rk3399-evb-ind", "rockchip,rk3399";
>> +
>> +    aliases {
>> +        ethernet0 = &gmac;
>> +        mmc0 = &sdhci;
>> +        mmc1 = &sdmmc;
>> +    };
>> +
>> +    chosen {
>> +        stdout-path = "serial2:1500000n8";
>> +    };
>> +
>> +    clkin_gmac: external-gmac-clock {
>> +        compatible = "fixed-clock";
>> +        clock-frequency = <125000000>;
>> +        clock-output-names = "clkin_gmac";
>> +        #clock-cells = <0>;
>> +    };
>> +
>> +    vcc5v0_sys: regulator-vcc5v0-sys {
>> +        compatible = "regulator-fixed";
>> +        enable-active-high;
>> +        gpio = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>;
>> +        regulator-name = "vcc5v0_sys";
>> +        regulator-always-on;
>> +        regulator-boot-on;
>> +        regulator-max-microvolt = <5000000>;
>> +        regulator-min-microvolt = <5000000>;
>> +    };
>> +
>> +    vcc_phy: regulator-vcc-phy {
>> +        compatible = "regulator-fixed";
>> +        regulator-always-on;
>> +        regulator-boot-on;
>> +        regulator-name = "vcc_phy";
>> +    };
>> +};
>> +
>> +&emmc_phy {
>> +    status = "okay";
>> +};
>> +
>> +&gmac {
>> +    assigned-clocks = <&cru SCLK_RMII_SRC>;
>> +    assigned-clock-parents = <&clkin_gmac>;
>> +    pinctrl-names = "default";
>> +    pinctrl-0 = <&rgmii_pins>;
>> +    clock_in_out = "input";
>> +    phy-supply = <&vcc_phy>;
>> +    phy-mode = "rgmii";
>> +    snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
>> +    snps,reset-active-low;
>> +    snps,reset-delays-us = <0 10000 150000>;
>> +    tx_delay = <0x22>;
>> +    rx_delay = <0x23>;
>> +    status = "okay";
>> +};
>> +
>> +&gpu {
>> +    mali-supply = <&vdd_gpu>;
>> +    status = "okay";
>> +};
>> +
>> +&hdmi {
>> +    pinctrl-names = "default";
>> +    pinctrl-0 = <&hdmi_i2c_xfer>, <&hdmi_cec>;
>> +    status = "okay";
>> +};
>> +
>> +&hdmi_in_vopl {
>> +    status = "disabled";
>> +};
>> +
>
> Why disabled?
Will fix this on v2.
>
>> +&hdmi_sound {
>> +    status = "okay";
>> +};
>> +
>> +&i2c0 {
>> +    clock-frequency = <400000>;
>> +    i2c-scl-falling-time-ns = <4>;
>> +    i2c-scl-rising-time-ns = <168>;
>> +    status = "okay";
>> +
>> +    vdd_gpu: tcs4526@10 {
>> +        compatible = "tcs,tcs4525";
>> +        reg = <0x10>;
>> +        pinctrl-names = "default";
>> +        pinctrl-0 = <&vsel2_gpio>;
>> +        fcs,suspend-voltage-selector = <1>;
>> +        vin-supply = <&vcc5v0_sys>;
>> +        vsel-gpios = <&gpio1 RK_PB6 GPIO_ACTIVE_HIGH>;
>> +        regulator-compatible = "fan53555-reg";
>> +        regulator-always-on;
>> +        regulator-boot-on;
>> +        regulator-initial-state = <3>;
>> +        regulator-max-microvolt = <1500000>;
>> +        regulator-min-microvolt = <712500>;
>> +        regulator-name = "vdd_gpu";
>> +        regulator-ramp-delay = <1000>;
>> +        regulator-state-mem {
>> +            regulator-off-in-suspend;
>> +        };
>
> No RK80x PMIC on this board?

It has a RK809 PMIC on this board.  I will add this on v2.


>
>> +    };
>> +};
>> +
>
> Missing io_domains here no? I guess it'll rely on the addition of the 
> RK80x PMIC for this to work?

Yes, I will add this on v2.


>
>> +&sdmmc {
>> +    bus-width = <4>;
>> +    cap-mmc-highspeed;
>> +    cap-sd-highspeed;
>> +    cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
>> +    disable-wp;
>> +    max-frequency = <150000000>;
>
> It's already defaulting to that frequency in rk3399-base.dtsi so no 
> need to duplicate the info here.
Will fix this on v2.
>
>> +    pinctrl-names = "default";
>> +    pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
>> +    status = "okay";
>> +};
>> +
>> +&sdhci {
>> +    bus-width = <8>;
>> +    keep-power-in-suspend;
>> +    mmc-hs400-1_8v;
>> +    mmc-hs400-enhanced-strobe;
>> +    no-sdio;
>> +    no-sd;
>> +    non-removable;
>> +    status = "okay";
>> +};
>> +
>> +&tcphy0 {
>> +    status = "okay";
>> +};
>> +
>> +&tcphy1 {
>> +    status = "okay";
>> +};
>> +
>> +&u2phy0 {
>> +    status = "okay";
>> +};
>> +
>> +&u2phy0_host {
>> +    status = "okay";
>> +};
>> +
>> +&u2phy0_otg {
>> +    status = "okay";
>> +};
>> +
>> +&u2phy1 {
>> +    status = "okay";
>> +};
>> +
>> +&u2phy1_host {
>> +    status = "okay";
>> +};
>> +
>> +&u2phy1_otg {
>> +    status = "okay";
>> +};
>> +
>> +&uart2 {
>> +    status = "okay";
>> +};
>> +
>> +&usbdrd_dwc3_0 {
>> +    status = "okay";
>> +};
>> +
>> +&usbdrd3_0 {
>> +    status = "okay";
>> +};
>> +
>> +&usbdrd3_1 {
>> +    status = "okay";
>> +};
>> +
>> +&usbdrd_dwc3_1 {
>> +    dr_mode = "host";
>> +    status = "okay";
>> +};
>> +
>> +&usb_host0_ehci {
>> +    status = "okay";
>> +};
>> +
>> +&usb_host0_ohci {
>> +    status = "okay";
>> +};
>> +
>> +&usb_host1_ehci {
>> +    status = "okay";
>> +};
>> +
>> +&usb_host1_ohci {
>> +    status = "okay";
>> +};
>> +
>> +&pinctrl {
>> +    pmic {
>> +        vsel2_gpio: vsel2-gpio {
>> +            rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
>> +        };
>> +    };
>> +};
>> +
>> +&vopb {
>> +    status = "okay";
>> +};
>> +
>> +&vopb_mmu {
>> +    status = "okay";
>> +};
>
> Why no vopl?
Will enable vopl in v2.
>
> Cheers,
> Quentin
>
>
Re: [PATCH 2/2] arm64: dts: rockchip: Add rk3399-evb-ind board
Posted by Andrew Lunn 7 months, 3 weeks ago 
> +&gmac {
> +	assigned-clocks = <&cru SCLK_RMII_SRC>;
> +	assigned-clock-parents = <&clkin_gmac>;
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&rgmii_pins>;
> +	clock_in_out = "input";
> +	phy-supply = <&vcc_phy>;
> +	phy-mode = "rgmii";

Does the PCB have extra long clock lines to implement the RGMII 2ns
delay?

	Andrew
Re: [PATCH 2/2] arm64: dts: rockchip: Add rk3399-evb-ind board
Posted by Chaoyi Chen 7 months, 3 weeks ago 
Hi Andrew,

On 2025/4/28 4:42, Andrew Lunn wrote:
>> +&gmac {
>> +	assigned-clocks = <&cru SCLK_RMII_SRC>;
>> +	assigned-clock-parents = <&clkin_gmac>;
>> +	pinctrl-names = "default";
>> +	pinctrl-0 = <&rgmii_pins>;
>> +	clock_in_out = "input";
>> +	phy-supply = <&vcc_phy>;
>> +	phy-mode = "rgmii";
> Does the PCB have extra long clock lines to implement the RGMII 2ns
> delay?
The 2ns delay of RGMII is implemented inside the RK3399 chip instead of 
PCB lines, and there are also additional delayline configurations.

>
> 	Andrew
>
>
Re: [PATCH 2/2] arm64: dts: rockchip: Add rk3399-evb-ind board
Posted by Andrew Lunn 7 months, 3 weeks ago 
On Mon, Apr 28, 2025 at 09:47:34AM +0800, Chaoyi Chen wrote:
> Hi Andrew,
> 
> On 2025/4/28 4:42, Andrew Lunn wrote:
> > > +&gmac {
> > > +	assigned-clocks = <&cru SCLK_RMII_SRC>;
> > > +	assigned-clock-parents = <&clkin_gmac>;
> > > +	pinctrl-names = "default";
> > > +	pinctrl-0 = <&rgmii_pins>;
> > > +	clock_in_out = "input";
> > > +	phy-supply = <&vcc_phy>;
> > > +	phy-mode = "rgmii";
> > Does the PCB have extra long clock lines to implement the RGMII 2ns
> > delay?
> The 2ns delay of RGMII is implemented inside the RK3399 chip instead of PCB
> lines, and there are also additional delayline configurations.

If the PCB does not implement the delay, rgmii is wrong.

If the MAC/PHY pair is implementing the delay, you need to use
rgmii-id. You can then use additional properties to fine tune the
delay the MAC/PHY is adding. And the Linux preference is that the PHY
adds the delay.

	Andrew
Re: [PATCH 2/2] arm64: dts: rockchip: Add rk3399-evb-ind board
Posted by Chaoyi Chen 7 months, 3 weeks ago 
Hi Andrew,

On 2025/4/28 20:45, Andrew Lunn wrote:
> On Mon, Apr 28, 2025 at 09:47:34AM +0800, Chaoyi Chen wrote:
>> Hi Andrew,
>>
>> On 2025/4/28 4:42, Andrew Lunn wrote:
>>>> +&gmac {
>>>> +	assigned-clocks = <&cru SCLK_RMII_SRC>;
>>>> +	assigned-clock-parents = <&clkin_gmac>;
>>>> +	pinctrl-names = "default";
>>>> +	pinctrl-0 = <&rgmii_pins>;
>>>> +	clock_in_out = "input";
>>>> +	phy-supply = <&vcc_phy>;
>>>> +	phy-mode = "rgmii";
>>> Does the PCB have extra long clock lines to implement the RGMII 2ns
>>> delay?
>> The 2ns delay of RGMII is implemented inside the RK3399 chip instead of PCB
>> lines, and there are also additional delayline configurations.
> If the PCB does not implement the delay, rgmii is wrong.
>
> If the MAC/PHY pair is implementing the delay, you need to use
> rgmii-id. You can then use additional properties to fine tune the
> delay the MAC/PHY is adding. And the Linux preference is that the PHY
> adds the delay.

The signal path of RK3399 is as follows:

MAC <---> IO <---> PHY

In fact, the delay is added to the path between the MAC and the IO, 
rather than being implemented in the MAC itself. These delay value is 
controlled by the GRF register[0] . These paths are implemented inside 
the SoC and have not yet reached the board level.

According to the document[1], use "rgmii" when "RX and TX delays are 
added by the MAC when required". In addition, currently we can see that 
all RK3399 boards use "rgmii".  Is there anything I missed? Thank you.


[0]: 
https://lore.kernel.org/netdev/1472752204-8924-2-git-send-email-wxt@rock-chips.com/

[1]: 
https://www.kernel.org/doc/Documentation/devicetree/bindings/net/ethernet-controller.yaml

>
> 	Andrew
>
>
Re: [PATCH 2/2] arm64: dts: rockchip: Add rk3399-evb-ind board
Posted by Andrew Lunn 7 months, 3 weeks ago 
On Tue, Apr 29, 2025 at 10:42:59AM +0800, Chaoyi Chen wrote:
> Hi Andrew,
> 
> On 2025/4/28 20:45, Andrew Lunn wrote:
> > On Mon, Apr 28, 2025 at 09:47:34AM +0800, Chaoyi Chen wrote:
> > > Hi Andrew,
> > > 
> > > On 2025/4/28 4:42, Andrew Lunn wrote:
> > > > > +&gmac {
> > > > > +	assigned-clocks = <&cru SCLK_RMII_SRC>;
> > > > > +	assigned-clock-parents = <&clkin_gmac>;
> > > > > +	pinctrl-names = "default";
> > > > > +	pinctrl-0 = <&rgmii_pins>;
> > > > > +	clock_in_out = "input";
> > > > > +	phy-supply = <&vcc_phy>;
> > > > > +	phy-mode = "rgmii";
> > > > Does the PCB have extra long clock lines to implement the RGMII 2ns
> > > > delay?
> > > The 2ns delay of RGMII is implemented inside the RK3399 chip instead of PCB
> > > lines, and there are also additional delayline configurations.
> > If the PCB does not implement the delay, rgmii is wrong.
> > 
> > If the MAC/PHY pair is implementing the delay, you need to use
> > rgmii-id. You can then use additional properties to fine tune the
> > delay the MAC/PHY is adding. And the Linux preference is that the PHY
> > adds the delay.
> 
> The signal path of RK3399 is as follows:
> 
> MAC <---> IO <---> PHY
> 
> In fact, the delay is added to the path between the MAC and the IO, rather
> than being implemented in the MAC itself. These delay value is controlled by
> the GRF register[0] . These paths are implemented inside the SoC and have
> not yet reached the board level.

'rgmii' implies that the PCB is implementing the delay. Since this is
not the case here, you should be using rgmii-id.

> According to the document[1], use "rgmii" when "RX and TX delays are added
> by the MAC when required". In addition, currently we can see that all RK3399
> boards use "rgmii".  Is there anything I missed? Thank you.

What you are missing is that they are all wrong. Quite a few systems
get is wrong at the moment, and i'm being more strict. Ideally i want
to stop more examples of wrong rgmii being added. There is also a
discussion going on to clarify the documentation.

Implementing delays via the IO is also reasonably common. The MAC
should have control over the GRF register, normally via syscon. So the
MAC can implement correct behaviour. The default is that the MAC,
including IO, adds 0 delay, passes phy-mode to the PHY and the PHY
adds the delay.

Please consider how you can fix the MAC driver without breaking all
the boards using the wrong rgmii value. There are a few discussion
about this on the mailing list if you go searching.

	Andrew
Re: [PATCH 2/2] arm64: dts: rockchip: Add rk3399-evb-ind board
Posted by Chaoyi Chen 7 months, 3 weeks ago 
Hi Andrew,

On 2025/4/29 20:22, Andrew Lunn wrote:
> Please consider how you can fix the MAC driver without breaking all
> the boards using the wrong rgmii value. There are a few discussion
> about this on the mailing list if you go searching.

Thanks for the clarification. I'll fix the problems in the RK3399 gmac 
driver in a separate patch series. In v2 of this patch, I'll remove the 
ethernet device tree content for now.

Patchew 2.1-devel-b67e4c2

© 2016 - 2025 Red Hat, Inc.