Add a node for the OCP96011 on the board which is used to handle USB-C
analog audio switch and handles the SBU mux for DisplayPort-over-USB-C.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
---
arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts | 14 +++++++++++++-
1 file changed, 13 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts b/arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts
index ea9f5517e8a083e37c4b7432322bd6d18fea84a5..e0470be9142caa4bac4285a191725bbd60e706fa 100644
--- a/arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts
+++ b/arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts
@@ -750,7 +750,19 @@ vreg_l7p: ldo7 {
};
/* Pixelworks @ 26 */
- /* FSA4480 USB audio switch @ 42 */
+
+ typec-mux@42 {
+ compatible = "ocs,ocp96011", "fcs,fsa4480";
+ reg = <0x42>;
+
+ interrupts-extended = <&tlmm 7 IRQ_TYPE_LEVEL_LOW>;
+
+ vcc-supply = <&vreg_bob>;
+
+ mode-switch;
+ orientation-switch;
+ };
+
/* AW86927FCR haptics @ 5a */
};
--
2.49.0