Currently, the tx and rx queue number initialization is duplicated in
loongson_gmac_data() and loongson_gnet_data(), so move it to the common
function loongson_default_data().

This is a preparation for later patches.

Reviewed-by: Yanteng Si <si.yanteng@linux.dev>
Tested-by: Henry Chen <chenx97@aosc.io>
Tested-by: Biao Dong <dongbiao@loongson.cn>
Signed-off-by: Baoqi Zhang <zhangbaoqi@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
---
 .../ethernet/stmicro/stmmac/dwmac-loongson.c  | 54 ++++++-------------
 1 file changed, 16 insertions(+), 38 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c
index 1a93787056a7..2fb7a137b312 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c
@@ -83,6 +83,8 @@ struct stmmac_pci_info {
 static void loongson_default_data(struct pci_dev *pdev,
 				  struct plat_stmmacenet_data *plat)
 {
+	struct loongson_data *ld = plat->bsp_priv;
+
 	/* Get bus_id, this can be overwritten later */
 	plat->bus_id = pci_dev_id(pdev);
 
@@ -116,32 +118,27 @@ static void loongson_default_data(struct pci_dev *pdev,
 
 	plat->dma_cfg->pbl = 32;
 	plat->dma_cfg->pblx8 = true;
+
+	if (ld->loongson_id == DWMAC_CORE_LS_MULTICHAN) {
+		plat->rx_queues_to_use = CHANNEL_NUM;
+		plat->tx_queues_to_use = CHANNEL_NUM;
+
+		/* Only channel 0 supports checksum,
+		 * so turn off checksum to enable multiple channels.
+		 */
+		for (int i = 1; i < CHANNEL_NUM; i++)
+			plat->tx_queues_cfg[i].coe_unsupported = 1;
+	} else {
+		plat->tx_queues_to_use = 1;
+		plat->rx_queues_to_use = 1;
+	}
 }
 
 static int loongson_gmac_data(struct pci_dev *pdev,
 			      struct plat_stmmacenet_data *plat)
 {
-	struct loongson_data *ld;
-	int i;
-
-	ld = plat->bsp_priv;
-
 	loongson_default_data(pdev, plat);
 
-	if (ld->loongson_id == DWMAC_CORE_LS_MULTICHAN) {
-		plat->rx_queues_to_use = CHANNEL_NUM;
-		plat->tx_queues_to_use = CHANNEL_NUM;
-
-		/* Only channel 0 supports checksum,
-		 * so turn off checksum to enable multiple channels.
-		 */
-		for (i = 1; i < CHANNEL_NUM; i++)
-			plat->tx_queues_cfg[i].coe_unsupported = 1;
-	} else {
-		plat->tx_queues_to_use = 1;
-		plat->rx_queues_to_use = 1;
-	}
-
 	plat->phy_interface = PHY_INTERFACE_MODE_RGMII_ID;
 
 	return 0;
@@ -172,27 +169,8 @@ static void loongson_gnet_fix_speed(void *priv, int speed, unsigned int mode)
 static int loongson_gnet_data(struct pci_dev *pdev,
 			      struct plat_stmmacenet_data *plat)
 {
-	struct loongson_data *ld;
-	int i;
-
-	ld = plat->bsp_priv;
-
 	loongson_default_data(pdev, plat);
 
-	if (ld->loongson_id == DWMAC_CORE_LS_MULTICHAN) {
-		plat->rx_queues_to_use = CHANNEL_NUM;
-		plat->tx_queues_to_use = CHANNEL_NUM;
-
-		/* Only channel 0 supports checksum,
-		 * so turn off checksum to enable multiple channels.
-		 */
-		for (i = 1; i < CHANNEL_NUM; i++)
-			plat->tx_queues_cfg[i].coe_unsupported = 1;
-	} else {
-		plat->tx_queues_to_use = 1;
-		plat->rx_queues_to_use = 1;
-	}
-
 	plat->phy_interface = PHY_INTERFACE_MODE_GMII;
 	plat->mdio_bus_data->phy_mask = ~(u32)BIT(2);
 	plat->fix_mac_speed = loongson_gnet_fix_speed;
-- 
2.47.1