From: Francesco Dolcini <francesco.dolcini@toradex.com>

Add ethernet aliases, they are used by the firmware to set the MAC
address and by systemd to rename network interfaces to predictable
interface names, e.g. end0 and end1.

Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
---
 arch/arm64/boot/dts/freescale/imx8qm.dtsi | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8qm.dtsi b/arch/arm64/boot/dts/freescale/imx8qm.dtsi
index 6fa31bc9ece8..eccd0087efa7 100644
--- a/arch/arm64/boot/dts/freescale/imx8qm.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8qm.dtsi
@@ -17,6 +17,8 @@ / {
 	#size-cells = <2>;
 
 	aliases {
+		ethernet0 = &fec1;
+		ethernet1 = &fec2;
 		mmc0 = &usdhc1;
 		mmc1 = &usdhc2;
 		mmc2 = &usdhc3;
-- 
2.39.5

On 22/04/2025 12:02, Francesco Dolcini wrote:
> From: Francesco Dolcini <francesco.dolcini@toradex.com>
> 
> Add ethernet aliases, they are used by the firmware to set the MAC
> address and by systemd to rename network interfaces to predictable
> interface names, e.g. end0 and end1.
> 
> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
> ---
>  arch/arm64/boot/dts/freescale/imx8qm.dtsi | 2 ++
>  1 file changed, 2 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/freescale/imx8qm.dtsi b/arch/arm64/boot/dts/freescale/imx8qm.dtsi
> index 6fa31bc9ece8..eccd0087efa7 100644
> --- a/arch/arm64/boot/dts/freescale/imx8qm.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8qm.dtsi
> @@ -17,6 +17,8 @@ / {
>  	#size-cells = <2>;
>  
>  	aliases {
> +		ethernet0 = &fec1;
> +		ethernet1 = &fec2;
Can't they be disabled (e.g. because MAC is external?) on actual board?
IOW, aliases for exposed interfaces are properties of boards, not SoC.

What's more, I cannot find these in this DTSI, so how can you add alias
to non-existing node?

Best regards,
Krzysztof

On 25/04/2025 18:36, Krzysztof Kozlowski wrote:
> On 22/04/2025 12:02, Francesco Dolcini wrote:
>> From: Francesco Dolcini <francesco.dolcini@toradex.com>
>>
>> Add ethernet aliases, they are used by the firmware to set the MAC
>> address and by systemd to rename network interfaces to predictable
>> interface names, e.g. end0 and end1.
>>
>> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
>> ---
>>  arch/arm64/boot/dts/freescale/imx8qm.dtsi | 2 ++
>>  1 file changed, 2 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/freescale/imx8qm.dtsi b/arch/arm64/boot/dts/freescale/imx8qm.dtsi
>> index 6fa31bc9ece8..eccd0087efa7 100644
>> --- a/arch/arm64/boot/dts/freescale/imx8qm.dtsi
>> +++ b/arch/arm64/boot/dts/freescale/imx8qm.dtsi
>> @@ -17,6 +17,8 @@ / {
>>  	#size-cells = <2>;
>>  
>>  	aliases {
>> +		ethernet0 = &fec1;
>> +		ethernet1 = &fec2;
> Can't they be disabled (e.g. because MAC is external?) on actual board?
> IOW, aliases for exposed interfaces are properties of boards, not SoC.
> 
> What's more, I cannot find these in this DTSI, so how can you add alias
> to non-existing node?

I found them (terrible design by NXP) but they are disabled so that's
the point - adding aliases to disabled nodes is clear sign you are doing
it wrong.

Best regards,
Krzysztof

On 25/04/2025 18:39, Krzysztof Kozlowski wrote:
> On 25/04/2025 18:36, Krzysztof Kozlowski wrote:
>> On 22/04/2025 12:02, Francesco Dolcini wrote:
>>> From: Francesco Dolcini <francesco.dolcini@toradex.com>
>>>
>>> Add ethernet aliases, they are used by the firmware to set the MAC
>>> address and by systemd to rename network interfaces to predictable
>>> interface names, e.g. end0 and end1.
>>>
>>> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
>>> ---
>>>  arch/arm64/boot/dts/freescale/imx8qm.dtsi | 2 ++
>>>  1 file changed, 2 insertions(+)
>>>
>>> diff --git a/arch/arm64/boot/dts/freescale/imx8qm.dtsi b/arch/arm64/boot/dts/freescale/imx8qm.dtsi
>>> index 6fa31bc9ece8..eccd0087efa7 100644
>>> --- a/arch/arm64/boot/dts/freescale/imx8qm.dtsi
>>> +++ b/arch/arm64/boot/dts/freescale/imx8qm.dtsi
>>> @@ -17,6 +17,8 @@ / {
>>>  	#size-cells = <2>;
>>>  
>>>  	aliases {
>>> +		ethernet0 = &fec1;
>>> +		ethernet1 = &fec2;
>> Can't they be disabled (e.g. because MAC is external?) on actual board?
>> IOW, aliases for exposed interfaces are properties of boards, not SoC.
>>
>> What's more, I cannot find these in this DTSI, so how can you add alias
>> to non-existing node?
> 
> I found them (terrible design by NXP) but they are disabled so that's
> the point - adding aliases to disabled nodes is clear sign you are doing
> it wrong.

I'll fix existing NXP boards because this pattern of adding aliases for
disabled (thus non-existing) interface is in multiple places.

Best regards,
Krzysztof

On 22/04/25, Francesco Dolcini wrote:
> From: Francesco Dolcini <francesco.dolcini@toradex.com>
> 
> Add ethernet aliases, they are used by the firmware to set the MAC
> address and by systemd to rename network interfaces to predictable
> interface names, e.g. end0 and end1.
> 
> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Acked-by: Oliver Graute <oliver.graute@kococonnector.com>