In commit a2fd46cd3dbb ("Input: goodix - try not to touch the reset-pin on x86/ACPI devices")
a fix for problems on various x86/ACPI devices where external
pull-up is missing were added. The same type of problem can exist on
device-tree platforms, and the fix can be activated by adding the
no-reset-pull-up device-tree property.

Signed-off-by: Esben Haabendal <esben@geanix.com>
---
 drivers/input/touchscreen/goodix.c | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

diff --git a/drivers/input/touchscreen/goodix.c b/drivers/input/touchscreen/goodix.c
index a3e8a51c91449533b4d5185746df6b98676053dd..3a55b0f8e5132a5e1fe77bd27de74e058a4afdaf 100644
--- a/drivers/input/touchscreen/goodix.c
+++ b/drivers/input/touchscreen/goodix.c
@@ -775,7 +775,8 @@ int goodix_reset_no_int_sync(struct goodix_ts_data *ts)
 	 * power. Only do this in the non ACPI case since some ACPI boards
 	 * don't have a pull-up, so there the reset pin must stay active-high.
 	 */
-	if (ts->irq_pin_access_method == IRQ_PIN_ACCESS_GPIO) {
+	if (ts->irq_pin_access_method == IRQ_PIN_ACCESS_GPIO &&
+	    ts->gpiod_rst_flags == GPIOD_IN) {
 		error = gpiod_direction_input(ts->gpiod_rst);
 		if (error)
 			goto error;
@@ -969,6 +970,13 @@ static int goodix_get_gpio_config(struct goodix_ts_data *ts)
 	 */
 	ts->gpiod_rst_flags = GPIOD_IN;
 
+	/*
+	 * Devices that does not have pull-up on reset signal should not be
+	 * changed to input
+	 */
+	if (device_property_read_bool(dev, "no-reset-pull-up"))
+		ts->gpiod_rst_flags = GPIOD_ASIS;
+
 	ts->avdd28 = devm_regulator_get(dev, "AVDD28");
 	if (IS_ERR(ts->avdd28))
 		return dev_err_probe(dev, PTR_ERR(ts->avdd28), "Failed to get AVDD28 regulator\n");

-- 
2.49.0

Hi,

On 22-Apr-25 17:15, Esben Haabendal wrote:
> In commit a2fd46cd3dbb ("Input: goodix - try not to touch the reset-pin on x86/ACPI devices")
> a fix for problems on various x86/ACPI devices where external
> pull-up is missing were added. The same type of problem can exist on
> device-tree platforms, and the fix can be activated by adding the
> no-reset-pull-up device-tree property.
> 
> Signed-off-by: Esben Haabendal <esben@geanix.com>

Thank you for your patch.

> ---
>  drivers/input/touchscreen/goodix.c | 10 +++++++++-
>  1 file changed, 9 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/input/touchscreen/goodix.c b/drivers/input/touchscreen/goodix.c
> index a3e8a51c91449533b4d5185746df6b98676053dd..3a55b0f8e5132a5e1fe77bd27de74e058a4afdaf 100644
> --- a/drivers/input/touchscreen/goodix.c
> +++ b/drivers/input/touchscreen/goodix.c
> @@ -775,7 +775,8 @@ int goodix_reset_no_int_sync(struct goodix_ts_data *ts)
>  	 * power. Only do this in the non ACPI case since some ACPI boards
>  	 * don't have a pull-up, so there the reset pin must stay active-high.
>  	 */
> -	if (ts->irq_pin_access_method == IRQ_PIN_ACCESS_GPIO) {
> +	if (ts->irq_pin_access_method == IRQ_PIN_ACCESS_GPIO &&
> +	    ts->gpiod_rst_flags == GPIOD_IN) {

You can simplify the check to just:

	if (ts->gpiod_rst_flags == GPIOD_IN) {

that will work for the IRQ_PIN_ACCESS_ACPI* access_methods too and
nicely lines up with the gpiod_direction_input() on the next line.

Please also update the comment above the check to reflect the new
situation.

With this fixed, this looks good to me:

Reviewed-by: Hans de Goede <hdegoede@redhat.com>

Regards,

Hans





>  		error = gpiod_direction_input(ts->gpiod_rst);
>  		if (error)
>  			goto error;
> @@ -969,6 +970,13 @@ static int goodix_get_gpio_config(struct goodix_ts_data *ts)
>  	 */
>  	ts->gpiod_rst_flags = GPIOD_IN;
>  
> +	/*
> +	 * Devices that does not have pull-up on reset signal should not be
> +	 * changed to input
> +	 */
> +	if (device_property_read_bool(dev, "no-reset-pull-up"))
> +		ts->gpiod_rst_flags = GPIOD_ASIS;
> +
>  	ts->avdd28 = devm_regulator_get(dev, "AVDD28");
>  	if (IS_ERR(ts->avdd28))
>  		return dev_err_probe(dev, PTR_ERR(ts->avdd28), "Failed to get AVDD28 regulator\n");
>