On 4/21/25 05:18, Cedric Encarnacion wrote:
> Introduce hardware monitoring and regulator support for LT3074. The
> component is an ultrafast, ultralow noise 3A, 5.5V dropout linear
> regulator with a PMBus serial interface that allows telemetry for
> input/output voltage, output current, and die temperature. It has a
> single channel and requires a bias voltage which can be monitored via
> manufacturer-specific registers.
>
> Signed-off-by: Cedric Encarnacion <cedricjustine.encarnacion@analog.com>
> ---
> Changes in v3:
> -
> * Non-nested dt-binding regulator support.
> * PMBUS_REGULATOR_ONE("vout") -> PMBUS_REGULATOR_ONE("regulator").
> New macro needs node-name to be matched.
>
Does that mean we can (and maybe should) drop the name parameter
of that macro ?
This isn't affecting this patch. If needed I'll do that separately.
Just asking.
Thanks,
Guenter
> - Link to v2: https://lore.kernel.org/r/20250225-upstream-lt3074-v2-0-18ad10ba542e@analog.com
>
> Changes in v2:
> * Separated dt-binding for LT3074.
> * Added __maybe_unused attribute to of_device_id. This addresses kernel
> test robot warning.
> * Added entry to MAINTAINERS.
>
> - Link to v1: https://lore.kernel.org/r/20250124-upstream-lt3074-v1-0-7603f346433e@analog.com
>
> ---
> Cedric Encarnacion (2):
> dt-bindings: hwmon: pmbus: add lt3074
> hwmon: (pmbus/lt3074): add support for lt3074
>
> .../bindings/hwmon/pmbus/adi,lt3074.yaml | 50 +++++++++
> Documentation/hwmon/index.rst | 1 +
> Documentation/hwmon/lt3074.rst | 72 ++++++++++++
> MAINTAINERS | 9 ++
> drivers/hwmon/pmbus/Kconfig | 18 +++
> drivers/hwmon/pmbus/Makefile | 1 +
> drivers/hwmon/pmbus/lt3074.c | 122 +++++++++++++++++++++
> 7 files changed, 273 insertions(+)
> ---
> base-commit: 86d264b68309d9f9804db4079642b98104ca15df
> change-id: 20250124-upstream-lt3074-123384246e0b
>
> Best regards,