arm64: dts: qcom: minor display-related fixups

[PATCH 12/20] arm64: dts: qcom: sm6115: use correct size for VBIF regions

Posted by Dmitry Baryshkov 10 months ago

Use allocated region size for VBIF regions as defined by the docs
(0x3000) instead of just using the last register address.

Suggested-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
---
 arch/arm64/boot/dts/qcom/sm6115.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/sm6115.dtsi b/arch/arm64/boot/dts/qcom/sm6115.dtsi
index 55a0db0ed9cbfa2560e94ca8160a31ff3f1efc25..c8865779173eca65f9e94535b5339f590d4b1410 100644
--- a/arch/arm64/boot/dts/qcom/sm6115.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6115.dtsi
@@ -1874,7 +1874,7 @@ &bimc SLAVE_EBI_CH0 RPM_ALWAYS_TAG>,
 			mdp: display-controller@5e01000 {
 				compatible = "qcom,sm6115-dpu";
 				reg = <0x0 0x05e01000 0x0 0x8f000>,
-				      <0x0 0x05eb0000 0x0 0x2008>;
+				      <0x0 0x05eb0000 0x0 0x3000>;
 				reg-names = "mdp", "vbif";
 
 				clocks = <&gcc GCC_DISP_HF_AXI_CLK>,

-- 
2.39.5

Re: [PATCH 12/20] arm64: dts: qcom: sm6115: use correct size for VBIF regions

Posted by Konrad Dybcio 10 months ago

On 4/15/25 12:26 PM, Dmitry Baryshkov wrote:
> Use allocated region size for VBIF regions as defined by the docs
> (0x3000) instead of just using the last register address.
> 
> Suggested-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
> ---

Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>

Konrad