1. Patchew
  2. linux
  3. [PATCH v4 0/7] clk: spacemit: add K1 reset support
  4. View patch

[PATCH v4 4/7] clk: spacemit: define existing syscon resets

Alex Elder posted 7 patches 10 months ago
There is a newer version of this series
[PATCH v4 4/7] clk: spacemit: define existing syscon resets
Posted by Alex Elder 10 months ago 
Define reset controls associated with the MPMU, APBC, and APMU
SpacemiT K1 CCUs.  These already have clocks associated with them.

Signed-off-by: Alex Elder <elder@riscstar.com>
---
 drivers/clk/spacemit/ccu-k1.c | 120 ++++++++++++++++++++++++++++++++++
 1 file changed, 120 insertions(+)

diff --git a/drivers/clk/spacemit/ccu-k1.c b/drivers/clk/spacemit/ccu-k1.c
index 020e751a9f305..09f101a52b1af 100644
--- a/drivers/clk/spacemit/ccu-k1.c
+++ b/drivers/clk/spacemit/ccu-k1.c
@@ -136,6 +136,13 @@ struct ccu_reset_data {
 	u32 deassert_mask;
 };
 
+#define RESET_DATA(_offset, _assert_mask, _deassert_mask)	\
+	{							\
+		.offset		= (_offset),			\
+		.assert_mask	= (_assert_mask),		\
+		.deassert_mask	= (_deassert_mask),		\
+	}
+
 struct spacemit_ccu_data {
 	struct clk_hw **clk_hws;			/* array */
 	size_t clk_num;
@@ -836,6 +843,7 @@ static struct clk_hw *k1_ccu_pll_hws[] = {
 static const struct spacemit_ccu_data k1_ccu_pll_data = {
 	.clk_hws	= k1_ccu_pll_hws,
 	.clk_num	= ARRAY_SIZE(k1_ccu_pll_hws),
+	/* No resets in the PLL CCU */
 };
 
 static struct clk_hw *k1_ccu_mpmu_hws[] = {
@@ -874,9 +882,15 @@ static struct clk_hw *k1_ccu_mpmu_hws[] = {
 	[CLK_WDT_BUS]		= &wdt_bus_clk.common.hw,
 };
 
+static const struct ccu_reset_data mpmu_reset_data[] = {
+	[RESET_WDT]	= RESET_DATA(MPMU_WDTPCR,		BIT(2), 0),
+};
+
 static const struct spacemit_ccu_data k1_ccu_mpmu_data = {
 	.clk_hws	= k1_ccu_mpmu_hws,
 	.clk_num	= ARRAY_SIZE(k1_ccu_mpmu_hws),
+	.reset_data	= mpmu_reset_data,
+	.reset_num	= ARRAY_SIZE(mpmu_reset_data),
 };
 
 static struct clk_hw *k1_ccu_apbc_hws[] = {
@@ -982,9 +996,65 @@ static struct clk_hw *k1_ccu_apbc_hws[] = {
 	[CLK_IPC_AP2AUD_BUS]	= &ipc_ap2aud_bus_clk.common.hw,
 };
 
+static const struct ccu_reset_data apbc_reset_data[] = {
+	[RESET_UART0]	= RESET_DATA(APBC_UART1_CLK_RST,	BIT(2),	0),
+	[RESET_UART2]	= RESET_DATA(APBC_UART2_CLK_RST,	BIT(2), 0),
+	[RESET_GPIO]	= RESET_DATA(APBC_GPIO_CLK_RST,		BIT(2), 0),
+	[RESET_PWM0]	= RESET_DATA(APBC_PWM0_CLK_RST,		BIT(2), BIT(0)),
+	[RESET_PWM1]	= RESET_DATA(APBC_PWM1_CLK_RST,		BIT(2), BIT(0)),
+	[RESET_PWM2]	= RESET_DATA(APBC_PWM2_CLK_RST,		BIT(2), BIT(0)),
+	[RESET_PWM3]	= RESET_DATA(APBC_PWM3_CLK_RST,		BIT(2), BIT(0)),
+	[RESET_PWM4]	= RESET_DATA(APBC_PWM4_CLK_RST,		BIT(2), BIT(0)),
+	[RESET_PWM5]	= RESET_DATA(APBC_PWM5_CLK_RST,		BIT(2), BIT(0)),
+	[RESET_PWM6]	= RESET_DATA(APBC_PWM6_CLK_RST,		BIT(2), BIT(0)),
+	[RESET_PWM7]	= RESET_DATA(APBC_PWM7_CLK_RST,		BIT(2), BIT(0)),
+	[RESET_PWM8]	= RESET_DATA(APBC_PWM8_CLK_RST,		BIT(2), BIT(0)),
+	[RESET_PWM9]	= RESET_DATA(APBC_PWM9_CLK_RST,		BIT(2), BIT(0)),
+	[RESET_PWM10]	= RESET_DATA(APBC_PWM10_CLK_RST,	BIT(2), BIT(0)),
+	[RESET_PWM11]	= RESET_DATA(APBC_PWM11_CLK_RST,	BIT(2), BIT(0)),
+	[RESET_PWM12]	= RESET_DATA(APBC_PWM12_CLK_RST,	BIT(2), BIT(0)),
+	[RESET_PWM13]	= RESET_DATA(APBC_PWM13_CLK_RST,	BIT(2), BIT(0)),
+	[RESET_PWM14]	= RESET_DATA(APBC_PWM14_CLK_RST,	BIT(2), BIT(0)),
+	[RESET_PWM15]	= RESET_DATA(APBC_PWM15_CLK_RST,	BIT(2), BIT(0)),
+	[RESET_PWM16]	= RESET_DATA(APBC_PWM16_CLK_RST,	BIT(2), BIT(0)),
+	[RESET_PWM17]	= RESET_DATA(APBC_PWM17_CLK_RST,	BIT(2), BIT(0)),
+	[RESET_PWM18]	= RESET_DATA(APBC_PWM18_CLK_RST,	BIT(2), BIT(0)),
+	[RESET_PWM19]	= RESET_DATA(APBC_PWM19_CLK_RST,	BIT(2), BIT(0)),
+	[RESET_SSP3]	= RESET_DATA(APBC_SSP3_CLK_RST,		BIT(2), 0),
+	[RESET_UART3]	= RESET_DATA(APBC_UART3_CLK_RST,	BIT(2), 0),
+	[RESET_RTC]	= RESET_DATA(APBC_RTC_CLK_RST,		BIT(2), 0),
+	[RESET_TWSI0]	= RESET_DATA(APBC_TWSI0_CLK_RST,	BIT(2), 0),
+	[RESET_TIMERS1]	= RESET_DATA(APBC_TIMERS1_CLK_RST,	BIT(2), 0),
+	[RESET_AIB]	= RESET_DATA(APBC_AIB_CLK_RST,		BIT(2), 0),
+	[RESET_TIMERS2]	= RESET_DATA(APBC_TIMERS2_CLK_RST,	BIT(2), 0),
+	[RESET_ONEWIRE]	= RESET_DATA(APBC_ONEWIRE_CLK_RST,	BIT(2), 0),
+	[RESET_SSPA0]	= RESET_DATA(APBC_SSPA0_CLK_RST,	BIT(2), 0),
+	[RESET_SSPA1]	= RESET_DATA(APBC_SSPA1_CLK_RST,	BIT(2), 0),
+	[RESET_DRO]	= RESET_DATA(APBC_DRO_CLK_RST,		BIT(2), 0),
+	[RESET_IR]	= RESET_DATA(APBC_IR_CLK_RST,		BIT(2), 0),
+	[RESET_TWSI1]	= RESET_DATA(APBC_TWSI1_CLK_RST,	BIT(2), 0),
+	[RESET_TSEN]	= RESET_DATA(APBC_TSEN_CLK_RST,		BIT(2), 0),
+	[RESET_TWSI2]	= RESET_DATA(APBC_TWSI2_CLK_RST,	BIT(2), 0),
+	[RESET_TWSI4]	= RESET_DATA(APBC_TWSI4_CLK_RST,	BIT(2), 0),
+	[RESET_TWSI5]	= RESET_DATA(APBC_TWSI5_CLK_RST,	BIT(2), 0),
+	[RESET_TWSI6]	= RESET_DATA(APBC_TWSI6_CLK_RST,	BIT(2), 0),
+	[RESET_TWSI7]	= RESET_DATA(APBC_TWSI7_CLK_RST,	BIT(2), 0),
+	[RESET_TWSI8]	= RESET_DATA(APBC_TWSI8_CLK_RST,	BIT(2), 0),
+	[RESET_IPC_AP2AUD] = RESET_DATA(APBC_IPC_AP2AUD_CLK_RST, BIT(2), 0),
+	[RESET_UART4]	= RESET_DATA(APBC_UART4_CLK_RST,	BIT(2), 0),
+	[RESET_UART5]	= RESET_DATA(APBC_UART5_CLK_RST,	BIT(2), 0),
+	[RESET_UART6]	= RESET_DATA(APBC_UART6_CLK_RST,	BIT(2), 0),
+	[RESET_UART7]	= RESET_DATA(APBC_UART7_CLK_RST,	BIT(2), 0),
+	[RESET_UART8]	= RESET_DATA(APBC_UART8_CLK_RST,	BIT(2), 0),
+	[RESET_UART9]	= RESET_DATA(APBC_UART9_CLK_RST,	BIT(2), 0),
+	[RESET_CAN0]	= RESET_DATA(APBC_CAN0_CLK_RST,		BIT(2), 0),
+};
+
 static const struct spacemit_ccu_data k1_ccu_apbc_data = {
 	.clk_hws	= k1_ccu_apbc_hws,
 	.clk_num	= ARRAY_SIZE(k1_ccu_apbc_hws),
+	.reset_data	= apbc_reset_data,
+	.reset_num	= ARRAY_SIZE(apbc_reset_data),
 };
 
 static struct clk_hw *k1_ccu_apmu_hws[] = {
@@ -1052,9 +1122,59 @@ static struct clk_hw *k1_ccu_apmu_hws[] = {
 	[CLK_EMMC_BUS]		= &emmc_bus_clk.common.hw,
 };
 
+static const struct ccu_reset_data apmu_reset_data[] = {
+	[RESET_CCIC_4X]	= RESET_DATA(APMU_CCIC_CLK_RES_CTRL,	0, BIT(1)),
+	[RESET_CCIC1_PHY] = RESET_DATA(APMU_CCIC_CLK_RES_CTRL,	0, BIT(2)),
+	[RESET_SDH_AXI]	= RESET_DATA(APMU_SDH0_CLK_RES_CTRL,	0, BIT(0)),
+	[RESET_SDH0]	= RESET_DATA(APMU_SDH0_CLK_RES_CTRL,	0, BIT(1)),
+	[RESET_SDH1]	= RESET_DATA(APMU_SDH1_CLK_RES_CTRL,	0, BIT(1)),
+	[RESET_SDH2]	= RESET_DATA(APMU_SDH2_CLK_RES_CTRL,	0, BIT(1)),
+	[RESET_USBP1_AXI] = RESET_DATA(APMU_USB_CLK_RES_CTRL,	0, BIT(4)),
+	[RESET_USB_AXI]	= RESET_DATA(APMU_USB_CLK_RES_CTRL,	0, BIT(0)),
+	[RESET_USB3_0]	= RESET_DATA(APMU_USB_CLK_RES_CTRL,	0,
+				      BIT(11) | BIT(10) | BIT(9)),
+	[RESET_QSPI]	= RESET_DATA(APMU_QSPI_CLK_RES_CTRL,	0, BIT(1)),
+	[RESET_QSPI_BUS] = RESET_DATA(APMU_QSPI_CLK_RES_CTRL,	0, BIT(0)),
+	[RESET_DMA]	= RESET_DATA(APMU_DMA_CLK_RES_CTRL,	0, BIT(0)),
+	[RESET_AES]	= RESET_DATA(APMU_AES_CLK_RES_CTRL,	0, BIT(4)),
+	[RESET_VPU]	= RESET_DATA(APMU_VPU_CLK_RES_CTRL,	0, BIT(0)),
+	[RESET_GPU]	= RESET_DATA(APMU_GPU_CLK_RES_CTRL,	0, BIT(1)),
+	[RESET_EMMC]	= RESET_DATA(APMU_PMUA_EM_CLK_RES_CTRL,	0, BIT(1)),
+	[RESET_EMMC_X]	= RESET_DATA(APMU_PMUA_EM_CLK_RES_CTRL,	0, BIT(0)),
+	[RESET_AUDIO]	= RESET_DATA(APMU_AUDIO_CLK_RES_CTRL,	0,
+				   BIT(3) | BIT(2) | BIT(0)),
+	[RESET_HDMI]	= RESET_DATA(APMU_HDMI_CLK_RES_CTRL,	0, BIT(9)),
+	[RESET_PCIE0]	= RESET_DATA(APMU_PCIE_CLK_RES_CTRL_0,	BIT(8),
+				   BIT(5) | BIT(4) | BIT(3)),
+	[RESET_PCIE1]	= RESET_DATA(APMU_PCIE_CLK_RES_CTRL_1,	BIT(8),
+				   BIT(5) | BIT(4) | BIT(3)),
+	[RESET_PCIE2]	= RESET_DATA(APMU_PCIE_CLK_RES_CTRL_2,	BIT(8),
+				   BIT(5) | BIT(4) | BIT(3)),
+	[RESET_EMAC0]	= RESET_DATA(APMU_EMAC0_CLK_RES_CTRL,	0, BIT(1)),
+	[RESET_EMAC1]	= RESET_DATA(APMU_EMAC1_CLK_RES_CTRL,	0, BIT(1)),
+	[RESET_JPG]	= RESET_DATA(APMU_JPG_CLK_RES_CTRL,	0, BIT(0)),
+	[RESET_CCIC2PHY] = RESET_DATA(APMU_CSI_CCIC2_CLK_RES_CTRL, 0, BIT(2)),
+	[RESET_CCIC3PHY] = RESET_DATA(APMU_CSI_CCIC2_CLK_RES_CTRL, 0, BIT(29)),
+	[RESET_CSI]	= RESET_DATA(APMU_CSI_CCIC2_CLK_RES_CTRL, 0, BIT(1)),
+	[RESET_ISP]	= RESET_DATA(APMU_ISP_CLK_RES_CTRL,	0, BIT(0)),
+	[RESET_ISP_CPP]	= RESET_DATA(APMU_ISP_CLK_RES_CTRL,	0, BIT(27)),
+	[RESET_ISP_BUS]	= RESET_DATA(APMU_ISP_CLK_RES_CTRL,	0, BIT(3)),
+	[RESET_ISP_CI]	= RESET_DATA(APMU_ISP_CLK_RES_CTRL,	0, BIT(16)),
+	[RESET_DPU_MCLK] = RESET_DATA(APMU_LCD_CLK_RES_CTRL2,	0, BIT(9)),
+	[RESET_DPU_ESC]	= RESET_DATA(APMU_LCD_CLK_RES_CTRL1,	0, BIT(3)),
+	[RESET_DPU_HCLK] = RESET_DATA(APMU_LCD_CLK_RES_CTRL1,	0, BIT(4)),
+	[RESET_DPU_SPIBUS] = RESET_DATA(APMU_LCD_SPI_CLK_RES_CTRL, 0, BIT(4)),
+	[RESET_DPU_SPI_HBUS] = RESET_DATA(APMU_LCD_SPI_CLK_RES_CTRL, 0, BIT(2)),
+	[RESET_V2D]	= RESET_DATA(APMU_LCD_CLK_RES_CTRL1,	0, BIT(27)),
+	[RESET_MIPI]	= RESET_DATA(APMU_LCD_CLK_RES_CTRL1,	0, BIT(15)),
+	[RESET_MC]	= RESET_DATA(APMU_PMUA_MC_CTRL,		0, BIT(0)),
+};
+
 static const struct spacemit_ccu_data k1_ccu_apmu_data = {
 	.clk_hws	= k1_ccu_apmu_hws,
 	.clk_num	= ARRAY_SIZE(k1_ccu_apmu_hws),
+	.reset_data	= apmu_reset_data,
+	.reset_num	= ARRAY_SIZE(apmu_reset_data),
 };
 
 static int spacemit_reset_update(struct reset_controller_dev *rcdev,
-- 
2.45.2

Patchew 2.1-devel-b67e4c2

© 2016 - 2026 Red Hat, Inc.