rtl8211f_led_hw_control_get() does not need atomic bit operations,
replace set_bit() by __set_bit().

Signed-off-by: Michael Klein <michael@fossekall.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
---
 drivers/net/phy/realtek/realtek_main.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/net/phy/realtek/realtek_main.c b/drivers/net/phy/realtek/realtek_main.c
index b06d53867b99..cf310cc90b97 100644
--- a/drivers/net/phy/realtek/realtek_main.c
+++ b/drivers/net/phy/realtek/realtek_main.c
@@ -581,17 +581,17 @@ static int rtl8211f_led_hw_control_get(struct phy_device *phydev, u8 index,
 	val &= RTL8211F_LEDCR_MASK;
 
 	if (val & RTL8211F_LEDCR_LINK_10)
-		set_bit(TRIGGER_NETDEV_LINK_10, rules);
+		__set_bit(TRIGGER_NETDEV_LINK_10, rules);
 
 	if (val & RTL8211F_LEDCR_LINK_100)
-		set_bit(TRIGGER_NETDEV_LINK_100, rules);
+		__set_bit(TRIGGER_NETDEV_LINK_100, rules);
 
 	if (val & RTL8211F_LEDCR_LINK_1000)
-		set_bit(TRIGGER_NETDEV_LINK_1000, rules);
+		__set_bit(TRIGGER_NETDEV_LINK_1000, rules);
 
 	if (val & RTL8211F_LEDCR_ACT_TXRX) {
-		set_bit(TRIGGER_NETDEV_RX, rules);
-		set_bit(TRIGGER_NETDEV_TX, rules);
+		__set_bit(TRIGGER_NETDEV_RX, rules);
+		__set_bit(TRIGGER_NETDEV_TX, rules);
 	}
 
 	return 0;
-- 
2.39.5