The purpose of this series is to switch to fwnode_irq_get_by_name()
in the core module instead of using irq from the bus parsing.
Add interrupt naming and support only INT1.

Signed-off-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
---
Changes in v3:
- Update dt-binding to report support of the 2 interrupts and delete
  remark about driver feature support.
- Link to v2: https://lore.kernel.org/r/20250407-iio-imu-inv-icm42600-rework-interrupt-using-names-v2-0-c278acf587b2@tdk.com

Changes in v2:
- Add INT2 in interrupt-names enum and fix enum
- Add fallback to first interrupt if naming is not here to ensure
  backward compatibility
- Link to v1: https://lore.kernel.org/r/20250404-iio-imu-inv-icm42600-rework-interrupt-using-names-v1-0-72ed5100da14@tdk.com

---
Jean-Baptiste Maneyrol (2):
      dt-bindings: iio: imu: icm42600: add interrupt naming support
      iio: imu: inv_icm42600: switch to use generic name irq get

 .../bindings/iio/imu/invensense,icm42600.yaml           | 13 ++++++++++++-
 drivers/iio/imu/inv_icm42600/inv_icm42600.h             |  2 +-
 drivers/iio/imu/inv_icm42600/inv_icm42600_core.c        | 17 +++++++++++++++--
 drivers/iio/imu/inv_icm42600/inv_icm42600_i2c.c         |  2 +-
 drivers/iio/imu/inv_icm42600/inv_icm42600_spi.c         |  2 +-
 5 files changed, 30 insertions(+), 6 deletions(-)
---
base-commit: 1c2409fe38d5c19015d69851d15ba543d1911932
change-id: 20250325-iio-imu-inv-icm42600-rework-interrupt-using-names-b397ced72835

Best regards,
-- 
Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>