[PATCH v3 4/5] iio: dac: adi-axi-dac: add data source get

Angelo Dureghello posted 5 patches 10 months, 1 week ago
There is a newer version of this series
[PATCH v3 4/5] iio: dac: adi-axi-dac: add data source get
Posted by Angelo Dureghello 10 months, 1 week ago
From: Angelo Dureghello <adureghello@baylibre.com>

Add data source getter.

Signed-off-by: Angelo Dureghello <adureghello@baylibre.com>
---
 drivers/iio/dac/adi-axi-dac.c | 30 ++++++++++++++++++++++++++++++
 1 file changed, 30 insertions(+)

diff --git a/drivers/iio/dac/adi-axi-dac.c b/drivers/iio/dac/adi-axi-dac.c
index f86acb98b0cffb09bf4d4626f932bf1edc911e2b..8ed5ad1fa24cef649056bc5f4ca80abbf28b9323 100644
--- a/drivers/iio/dac/adi-axi-dac.c
+++ b/drivers/iio/dac/adi-axi-dac.c
@@ -536,6 +536,35 @@ static int axi_dac_data_source_set(struct iio_backend *back, unsigned int chan,
 	}
 }
 
+static int axi_dac_data_source_get(struct iio_backend *back, unsigned int chan,
+				   enum iio_backend_data_source *data)
+{
+	struct axi_dac_state *st = iio_backend_get_priv(back);
+	int ret;
+	u32 val;
+
+	if (chan > AXI_DAC_CHAN_CNTRL_MAX)
+		return -EINVAL;
+
+	ret = regmap_read(st->regmap, AXI_DAC_CHAN_CNTRL_7_REG(chan), &val);
+	if (ret)
+		return ret;
+
+	switch (val) {
+	case AXI_DAC_DATA_INTERNAL_TONE:
+		*data = IIO_BACKEND_INTERNAL_CONTINUOUS_WAVE;
+		return 0;
+	case AXI_DAC_DATA_DMA:
+		*data = IIO_BACKEND_EXTERNAL;
+		return 0;
+	case AXI_DAC_DATA_INTERNAL_RAMP_16BIT:
+		*data = IIO_BACKEND_INTERNAL_RAMP_16BIT;
+		return 0;
+	default:
+		return -EIO;
+	}
+}
+
 static int axi_dac_set_sample_rate(struct iio_backend *back, unsigned int chan,
 				   u64 sample_rate)
 {
@@ -818,6 +847,7 @@ static const struct iio_backend_ops axi_ad3552r_ops = {
 	.request_buffer = axi_dac_request_buffer,
 	.free_buffer = axi_dac_free_buffer,
 	.data_source_set = axi_dac_data_source_set,
+	.data_source_get = axi_dac_data_source_get,
 	.ddr_enable = axi_dac_ddr_enable,
 	.ddr_disable = axi_dac_ddr_disable,
 	.data_stream_enable = axi_dac_data_stream_enable,

-- 
2.49.0
Re: [PATCH v3 4/5] iio: dac: adi-axi-dac: add data source get
Posted by Nuno Sá 10 months, 1 week ago
On Mon, 2025-04-07 at 10:52 +0200, Angelo Dureghello wrote:
> From: Angelo Dureghello <adureghello@baylibre.com>
> 
> Add data source getter.
> 
> Signed-off-by: Angelo Dureghello <adureghello@baylibre.com>
> ---

Reviewed-by: Nuno Sá <nuno.sa@analog.com>

>  drivers/iio/dac/adi-axi-dac.c | 30 ++++++++++++++++++++++++++++++
>  1 file changed, 30 insertions(+)
> 
> diff --git a/drivers/iio/dac/adi-axi-dac.c b/drivers/iio/dac/adi-axi-dac.c
> index
> f86acb98b0cffb09bf4d4626f932bf1edc911e2b..8ed5ad1fa24cef649056bc5f4ca80abbf28b
> 9323 100644
> --- a/drivers/iio/dac/adi-axi-dac.c
> +++ b/drivers/iio/dac/adi-axi-dac.c
> @@ -536,6 +536,35 @@ static int axi_dac_data_source_set(struct iio_backend
> *back, unsigned int chan,
>  	}
>  }
>  
> +static int axi_dac_data_source_get(struct iio_backend *back, unsigned int
> chan,
> +				   enum iio_backend_data_source *data)
> +{
> +	struct axi_dac_state *st = iio_backend_get_priv(back);
> +	int ret;
> +	u32 val;
> +
> +	if (chan > AXI_DAC_CHAN_CNTRL_MAX)
> +		return -EINVAL;
> +
> +	ret = regmap_read(st->regmap, AXI_DAC_CHAN_CNTRL_7_REG(chan), &val);
> +	if (ret)
> +		return ret;
> +
> +	switch (val) {
> +	case AXI_DAC_DATA_INTERNAL_TONE:
> +		*data = IIO_BACKEND_INTERNAL_CONTINUOUS_WAVE;
> +		return 0;
> +	case AXI_DAC_DATA_DMA:
> +		*data = IIO_BACKEND_EXTERNAL;
> +		return 0;
> +	case AXI_DAC_DATA_INTERNAL_RAMP_16BIT:
> +		*data = IIO_BACKEND_INTERNAL_RAMP_16BIT;
> +		return 0;
> +	default:
> +		return -EIO;
> +	}
> +}
> +
>  static int axi_dac_set_sample_rate(struct iio_backend *back, unsigned int
> chan,
>  				   u64 sample_rate)
>  {
> @@ -818,6 +847,7 @@ static const struct iio_backend_ops axi_ad3552r_ops = {
>  	.request_buffer = axi_dac_request_buffer,
>  	.free_buffer = axi_dac_free_buffer,
>  	.data_source_set = axi_dac_data_source_set,
> +	.data_source_get = axi_dac_data_source_get,
>  	.ddr_enable = axi_dac_ddr_enable,
>  	.ddr_disable = axi_dac_ddr_disable,
>  	.data_stream_enable = axi_dac_data_stream_enable,