drivers/media/platform/raspberrypi/rp1-cfe/cfe.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
The source subdevice might be using a source pad not equal to 0.
Use the already existing source_pad field of cfe.
Fixes: 6edb685abb2a ("media: raspberrypi: Add support for RP1-CFE")
Signed-off-by: Cosmin Tanislav <demonsingur@gmail.com>
---
V2:
* correct Fixes tag
drivers/media/platform/raspberrypi/rp1-cfe/cfe.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/media/platform/raspberrypi/rp1-cfe/cfe.c b/drivers/media/platform/raspberrypi/rp1-cfe/cfe.c
index 69a5f23e7954..7db4fe5e0fd4 100644
--- a/drivers/media/platform/raspberrypi/rp1-cfe/cfe.c
+++ b/drivers/media/platform/raspberrypi/rp1-cfe/cfe.c
@@ -1206,8 +1206,8 @@ static int cfe_start_streaming(struct vb2_queue *vq, unsigned int count)
cfg_reg_write(cfe, MIPICFG_INTE,
MIPICFG_INT_CSI_DMA | MIPICFG_INT_PISP_FE);
- ret = v4l2_subdev_call(cfe->source_sd, pad, get_mbus_config, 0,
- &mbus_config);
+ ret = v4l2_subdev_call(cfe->source_sd, pad, get_mbus_config,
+ cfe->source_pad, &mbus_config);
if (ret < 0 && ret != -ENOIOCTLCMD) {
cfe_err(cfe, "g_mbus_config failed\n");
goto err_clear_inte;
--
2.49.0
Hi,
On 04/04/2025 12:00, Cosmin Tanislav wrote:
> The source subdevice might be using a source pad not equal to 0.
>
> Use the already existing source_pad field of cfe.
>
> Fixes: 6edb685abb2a ("media: raspberrypi: Add support for RP1-CFE")
> Signed-off-by: Cosmin Tanislav <demonsingur@gmail.com>
> ---
>
> V2:
> * correct Fixes tag
>
> drivers/media/platform/raspberrypi/rp1-cfe/cfe.c | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/media/platform/raspberrypi/rp1-cfe/cfe.c b/drivers/media/platform/raspberrypi/rp1-cfe/cfe.c
> index 69a5f23e7954..7db4fe5e0fd4 100644
> --- a/drivers/media/platform/raspberrypi/rp1-cfe/cfe.c
> +++ b/drivers/media/platform/raspberrypi/rp1-cfe/cfe.c
> @@ -1206,8 +1206,8 @@ static int cfe_start_streaming(struct vb2_queue *vq, unsigned int count)
> cfg_reg_write(cfe, MIPICFG_INTE,
> MIPICFG_INT_CSI_DMA | MIPICFG_INT_PISP_FE);
>
> - ret = v4l2_subdev_call(cfe->source_sd, pad, get_mbus_config, 0,
> - &mbus_config);
> + ret = v4l2_subdev_call(cfe->source_sd, pad, get_mbus_config,
> + cfe->source_pad, &mbus_config);
> if (ret < 0 && ret != -ENOIOCTLCMD) {
> cfe_err(cfe, "g_mbus_config failed\n");
> goto err_clear_inte;
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Tomi
© 2016 - 2026 Red Hat, Inc.